Commit Graph

38 Commits

Author SHA1 Message Date
b271bf309e hardware: pcb: add assymetric pads for WLCSP
This incorporates requests made by the PCB vendor.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-12-22 23:44:17 +08:00
268b036de8 hardware: pcb: make soldermask actually function
The default kicad rules are dumb, and almost caused this PCB to be made
wrongly.

Fix the soldermask so that it actually works at our resolutions.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-12-22 23:43:40 +08:00
70bc21c989 pcb: move "11 cm" tag out from behind PCB
Signed-off-by: Sean Cross <sean@xobs.io>
2018-12-15 09:47:20 +08:00
5f4fa8891a hardware: pcb: fix drill origin, Fab layer
Fix up the Fab layer so that it is actually useful now.

Additionally, move the drill origin so that it is in a sane place.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-12-11 15:41:12 +08:00
ef4835fc41 hardware: pcb: minor modifications, update footprints
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-30 11:04:23 -05:00
0a7b84d1c3 hardware: replace VCCPLL regulator with RC network
Having a full regulator on VCCPLL causes the ESD network in the ICE40 to
freak out, dumping VCCPLL into GND and trying very hard to burn out the
regulator.

Replace it with a simple RC filter network, which is less clean but
results in a happier ESD network.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-25 04:08:23 +08:00
a4f319a951 hardware: pcb: change gerber attributes flag
This should be disabled, for maximum compatibility.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-21 00:01:33 +08:00
e2a39f508d hardware: pcb: redo xtal footprint, 12V diode
Redo the xtal footprint, which was just flat out wrong.

Also, replace the +5V TVS diode with one that can handle more than 5V,
so it's not always shorting out.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-20 23:41:47 +08:00
fcbb4420d3 hardware: pcb: re-tune differential pair
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-18 15:56:29 +08:00
1af0d1c06e hardware: pcb: increase under-fpga keepout area size
Increase the size of the keepout area in order to remove some extra
copper that was appearing around one of the ground pads.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-18 15:51:40 +08:00
5d90502947 pcb: fix up assembly notes layers
Resize the assembly note layers so that it's usable (in theory).

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-18 14:46:44 +08:00
7a4497b0c9 hardware: pcb: connect usb esd diodes inline first
Move the USB ESD diodes so they connect first.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-17 17:58:54 +08:00
5a074ea4e1 hardware: pcb: finish routing with esd diodes
Finish routing the PCB with the esd diodes in place.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-16 21:44:49 +08:00
8b7adafd9d hardware: pcb: finish first draft of esd routing
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-16 16:44:52 +08:00
dcc33ac81b hardware: pcb: partial routing of new esd diodes
There's still a bit more to go...

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-16 12:49:25 +08:00
cc19668309 hardware: pcb: reduce the number of capacitors
This is an initial commit removing the excess capacitors.

We will eventually add ESD protection ICs in the space that has been
freed up.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-15 19:24:55 +08:00
23106ab57d hardware: pcb: reduce ground fill, loosen up routing
Reduce the ground fill under the IC, to prevent it from sliding around.
This gives less copper, but it should be fine for the currents we're
drawing.

Loosen up the routing of the 5V plane, which involves moving some
components around.  This increases the amount of copper that goes to the
various regulators.

Finally, reorder the caps so that the larger ones are further from the
IC.  This is done because they have a slower response time, and so can
be further away.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-15 19:14:24 +08:00
22aa8c8aca hardware: pcb: hide usb footprint silk
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-15 14:49:14 +08:00
b151d005f2 hardware: pcb: update PCB to use local copies of 3D files
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-15 14:46:54 +08:00
571646f5c1 hardware: pcb: more tuning of traces and pours
Open up some more pours, and move some vias to make pours larger.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-09 18:21:39 +08:00
bdf8b8558d hardware: pcb: remove text leftover from EFM32
This was used to select which ARM MCU to use.  It is no longer relevant.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-09 16:45:06 +08:00
294ecfe782 hardware: pcb: add more copper to 1.2V line
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-08 19:11:24 +08:00
8050e796ab hardware: pcb: clean up traces, widen up pours
Rework the traces somewhat to widen up the pours and remove some of the
bifurcation that's going on.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-08 19:07:56 +08:00
c2566ea16d hardware: pcb: add version and update silkscreen
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-07 21:47:16 +08:00
db938e5557 hardware: pcb: first full routing of pcb
This passes DRC and has no unconnected nets.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-07 21:20:53 +08:00
140717e3c6 hardware: pcb: first unrouted layout of dvt1
This is just a placement test, to see if it can be laid out.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-06 19:44:12 +08:00
f9205b7027 hardware: pcb: replace pcb with usb-tomu version
We'll use this as a starting point, to maintain the same shape and size.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-05 13:03:07 +08:00
49d2924c26 hardware: pcb: redo timestamps, because kicad
kicad decided to redo all the timestamps.  There are no other changes to
this commit.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-03 11:50:44 +08:00
25b662e6fb hardware: pcb: re-route USB after flipping the footprint
It looks kinda janky, but it's better than ripping everything up and
starting over.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-02 20:39:32 +08:00
6214f995e9 hardware: pcb: increase USB connector size
It was only 11.3mm before.  Make it 11.7mm, and center it.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-02 19:48:25 +08:00
e91896a8fb hardware: pcb: loosen up the ground plane / 5V some more
Move some vias around to get the 5V plane more breathing room.  Add a
small pour to give more copper and stabilize the net.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-02 19:22:29 +08:00
e48d836372 pcb: remove usb silk, add more 5V vias
Add more 5V vias near the 1.2V regulator, and replace a manual trace
with a copper pour.  This will increase the amount of copper going to
both the 3.3V and 1.2V regulators, which should improve stability.

While we're at it, remove an errant silk artifact on the USB connector.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-02 14:03:27 +08:00
46fdfdf134 hardware: pcb: update drill offset, add mfg notes
Add a note indicating the PCB thickness and color.

Also, move the drill origin to the lower-left corner, to aid in machine
assembly.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-02 13:49:40 +08:00
12afe3aed1 pcb: add more silk, fatten up ground traces
Add more silk, indicating website and other info.

While we're at it, move some traces around to give more copper area, and
drop some more vias to improve ground performance.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-02 12:49:56 +08:00
d1923f10e1 hardware: pcb: finish layout with new PMOD connector
This is just about manufacturable.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-02 11:37:49 +08:00
b26b71343d hardware: first fully-routed PCB
The PCB is terrible, and probably would have all sorts of issues.  Will
rip it up and try again tomorrow.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-31 22:28:10 +08:00
e32b48a72e hardware: pcb: initial commit
This is an initial commit.  Still unclear of how big it will be, but
this is a good "minimum size" estimate.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-31 16:03:55 +08:00
ab33b4a0a1 hardware: rename tomu-fpga to pcb
This more closely reflects what it actually is.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 17:05:02 +08:00