7d5a97d224
reference: re-plot evt3 schematic
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-05-21 09:49:53 +08:00
72816ce253
remove lockfile
...
Signed-off-by: Sean Cross <sean@xobs.io>
2018-12-25 12:16:46 +08:00
b01a4673fc
evt3: add screenshots and schematic to reference
...
Signed-off-by: Sean Cross <sean@xobs.io>
2018-12-25 10:22:37 +08:00
eb55fbad83
reference: regenerate evt2 jpeg
...
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-24 16:56:40 -05:00
adc085d054
reference: evt2: add renders and tag evt2
...
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-23 16:27:40 +08:00
e6d9a7c95a
reference: re-plot evt2 schematic with new numbering scheme
...
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-23 16:14:03 +08:00
d6d18fcf59
reference: add schematic of evt2
...
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-23 15:59:57 +08:00
3bce7b2c67
reference: add updated renders of evt1
...
The virtual floor has been removed.
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-10 11:38:08 +08:00
9639d75a11
releases: remove evt1 and evt2, and rename evt3 -> evt1
...
evt1 and evt2 were never produced. They also would never have worked,
because the USB connector was drawn mirrored.
Remove these and replace them with a single `evt1` that was actually
produced.
This reflects the fact that the `evt1` boards actually say "EVT1" on
them.
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-04 21:00:16 +08:00
89076f32bb
release: tag evt3
...
This is the first release that will actually work.
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-02 20:40:27 +08:00
2d86e4aa15
reference: add evt2 schematic
...
It's almost the same as evt1.
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-02 19:48:25 +08:00
b9889e6c5a
reference: rename RGB LED doc so it starts with LED-RGB
...
This is to differentiate it from the normal LED.
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-02 19:48:25 +08:00
74f18092fb
reference: add reference doc for RGB LED APN
...
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-02 19:48:25 +08:00
dd4ad06f7e
reference: add render of pcb back
...
Might as well put this in there, too!
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-02 12:52:45 +08:00
9f14ebbdbf
reference: add new render of PCB
...
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-02 12:50:51 +08:00
1ef5bb909f
reference: add updated schematic for evt1
...
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-02 11:39:13 +08:00
c5dda21a57
reference: add render of evt1 board
...
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-02 11:38:22 +08:00
3a14554c30
reference: add pushbutton, red LED
...
Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-31 12:58:45 +08:00
a715f5c728
hardware: add testpoints for SPI programming
...
This will become necessary when doing factory burning.
Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-31 10:54:13 +08:00
30b7610996
pcb: hook up more debug wires
...
We have spare pins, so run more debug wires.
Many of these will probably get cut when doing the PCB layout.
Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-31 10:45:27 +08:00
6283435874
reference: evt1: publish final-final-final schematic
...
It's final this time! I mean it!
Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-31 10:33:49 +08:00
b7bcfc595b
reference: update evt1 schematic pdf
...
This adds the `SPI Header`.
Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 23:47:17 +08:00
9cb4ba9a3d
reference: regenerate evt1 pdf
...
Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 19:21:59 +08:00
ddb9948232
reference: add another fpga doc, xtal doc
...
Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 19:16:30 +08:00
0c017aeb96
reference: update evt1 schematic
...
This schematic reflects more options, including two crystals now and
more decoupling capacitors.
It also adds an option to power VCCPLL from a second 1.2V regulator.
Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 19:15:28 +08:00
fd421b88ba
reference: re-re-export plot file
...
The numbering may have changed things. Maybe.
Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 17:07:19 +08:00
6136a66e8e
reference: evt1: minor reworking of label positions
...
Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 17:03:15 +08:00
b940b19cc6
reference: add datasheet for mems oscillator
...
Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 17:02:41 +08:00
177fe7196f
reference: evt1: add schematic
...
Add a schematic for EVT1, based on the most recent design.
Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 16:03:48 +08:00
2cd2b204c2
reference: add more ICE40 documentation
...
Add more reference docs for ICE40 parts.
Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 16:02:06 +08:00
0213e5d7f7
reference: initial commit
...
Add an initial commit of reference documentation.
Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 12:36:55 +08:00
