Commit Graph

13 Commits

Author SHA1 Message Date
64020199e8 hardware: cache: commit kicad's line-ending change
Why does it do this?  No one can say.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-16 21:45:25 +08:00
d0bd902112 hardware: lib: update cache file
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-16 12:48:37 +08:00
77d47db980 hardware: sch: add some spice models to passives
Identify passives and implement the various spice models.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-08 21:43:32 +08:00
a6fa6cf3e9 hardware: footprints: cleanup ice40 footprints
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-06 19:42:01 +08:00
bbc18d2a90 hardware: sch: work-in-progress to go from QFN to WLCSP
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-05 13:03:36 +08:00
34f74fbf51 hardware: sch: first draft of dvt1
This removes much of the support debugging stuff from evt1.  Still to
do:

- Assign footprints
- Figure out which PU resistor to include (if any)
- Figure out if we need to keep the USB buffering
- Remove extra decoupling caps

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-04 22:00:23 +08:00
37899c600b hardware: pcb: move pin headers into local repo
Move the new PMOD pin headers from KiCad into the local repo, so that it
no longer depends on KiCad version.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-02 19:21:48 +08:00
74d402417b hardware: tomu-fpga-cache: add conn-1x6 for PMOD
This connector is used for the PMOD, so add it to the schematic library.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-02 11:35:28 +08:00
b26b71343d hardware: first fully-routed PCB
The PCB is terrible, and probably would have all sorts of issues.  Will
rip it up and try again tomorrow.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-31 22:28:10 +08:00
d99d091d95 pcb: schematic-cache: add Raspberry Pi, new SPI Flash
This reworks the SPI Flash layout and adds the Raspberry Pi header.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-31 10:34:33 +08:00
0973972464 hardware: pcb: add SPI debug header
This will be used to program SPI during board bringup.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 22:28:08 +08:00
76f7bf2548 pcb: sch: make ICE40 VCCPLL a power input
For some reason, this pin was listed as a `power output`, which does not
appear to be the case.  Due to this error, the DRC would fail when using
a regulator directly connected to the pin.

Mark this pin as a `power input` to fix this, since it's really where
power goes into the chip.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 19:13:32 +08:00
ab33b4a0a1 hardware: rename tomu-fpga to pcb
This more closely reflects what it actually is.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 17:05:02 +08:00