91cd582dea
simmel: remove dfu and ota bootloaders
...
We don't want this device to be updatable over the air, and we don't
need the serial DFU bootloader. This leaves only UF2.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-18 22:37:06 +08:00
7d822f4df4
bootloader: start removing bluetooth support
...
We don't need bluetooth support for Simmel.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-17 10:45:11 +08:00
hathach
2128d60cc9
enable most warning option, fix all warnings
2020-03-25 18:39:39 +07:00
hathach
09fdd7dee2
remove unused dual banks
2020-03-25 17:34:49 +07:00
hathach
79ae930f15
fix some warnings with Wextra
2020-03-25 00:31:27 +07:00
hathach
e3449cd771
able to build with 52833
2019-11-29 01:02:05 +07:00
hathach
126115a2cb
update repo to work with latest tinyusb and nrfx module
2019-11-11 15:27:44 +07:00
fanoush
4ce961f25b
fix block alignment bug also in dfu_sd_image_validate
2019-05-24 13:22:57 +02:00
fanoush
90e3149050
fix block alignment bug also in dfu_sd_image_validate
2019-05-24 13:07:32 +02:00
hathach
5eac387b5a
clean up BLEDIS firmware version
2019-04-24 17:13:41 +07:00
hathach
b3b9e089f4
clean up
2019-04-24 16:51:31 +07:00
hathach
57aa554430
update tinyusb to latest for scsi write10 complete fix
2019-02-22 14:46:16 +07:00
hathach
d9b275c321
increase buffer depth to fix OTA issue with nrfConnect on iOS
...
- also add optional debug helper
- increase led conn cycle when ble connected for easier recognition
2019-02-15 12:12:11 +07:00
hathach
981a6976e2
change HCI_RX_BUF_QUEUE_SIZE back to 4
2019-01-31 22:50:42 +07:00
hathach
7ec0ff51f0
Merge pull request #40 from se7ensong/OTA_fix
...
Fix OTA using nRF toolbox on iPhone (tested on SE and XS)
2019-01-31 22:35:12 +07:00
hathach
3737d4bc12
update segger project, cleanup
2019-01-31 21:39:02 +07:00
Song Luan
04f05dac64
Fix OTA using nRF toolbox on iPhone (tested on SE and XS)
2019-01-10 13:09:24 +00:00
hathach
5c38bc8957
fix issue nrf52840 not reset properly when upgrading bootloader+sd combo
...
- root cause tusb_task()/cdc task is called when usb is not inited (in
case of sd upgrade)
2018-12-20 00:50:14 +07:00
hathach
fc13287837
clean up
2018-12-19 23:27:29 +07:00
hathach
64f2f671f6
fixed the incosnsitent led pattern by using systick to call led_tick()
2018-12-19 17:08:23 +07:00
Scott Shawcroft
2ece2daf90
Rework LED flashing and add Particle's boards
2018-12-04 13:45:55 -08:00
hathach
4f48b8b51a
rename led blink fast name
2018-11-23 11:46:21 +07:00
hathach
94e23a928c
feed wdt in bootloader if enabled. Since it is impossible to disable wdt
2018-11-19 17:01:45 +07:00
hathach
cb1ae6d947
add need_erase for flash_nrf5x. Only uf2 erase when flush, dfu serial (uart and cdc) will prepare erase in advance.
2018-10-02 20:41:53 +07:00
hathach
51411ff85d
finally fix #31 using erasing in advance and skip erase on the fly for nrf52832.
...
Note A small amount of delay (10 ms) is also added by adafruit-nrfutil
after each 4KB to be safe.
2018-10-02 16:55:55 +07:00
hathach
f14aebba1d
rename flash_ to flash_nrf5x_
2018-09-28 23:45:27 +07:00
hathach
89c547f0cc
fix build issue with non-optimization
2018-09-28 13:12:14 +07:00
hathach
8b30c417f8
fix adv issue with SD 6.1.0. Add binaries for 6.1.0r0
2018-08-22 13:28:29 +07:00
hathach
6feea4e069
fix issue with dfu startup on nrf52832, change to adafruit-nrfutil
...
clean up dfu startup
2018-08-21 14:14:23 +07:00
hathach
e585ffc26c
clean up
2018-08-16 03:50:11 +07:00
hathach
ab8d24f935
OTA cannot start with SD v6.1.0, but start without issue with 6.0.0
...
force ota for testing.
2018-08-14 18:54:49 +07:00
hathach
586679278e
clean up
2018-08-14 18:42:19 +07:00
hathach
85ad6e6b65
add boards.c , remove msc_uf2.h lots of clean up and refactor
2018-08-14 15:56:24 +07:00
hathach
4eee219b5a
use PWM0 & PWM1 for led blinky fix #14
2018-08-14 00:56:51 +07:00
hathach
1c2911a63c
close #18 , close #19
...
softdevice is only enabled with OTA mode
2018-08-13 21:50:55 +07:00
hathach
fe712fb588
resolve #18 , dfu serial able to run without SD
2018-08-13 18:11:47 +07:00
hathach
648d50b893
clean up
2018-08-13 17:17:00 +07:00
hathach
e946aabd6d
uf2 does not depend on softdevice
2018-08-11 11:43:57 +07:00
hathach
352c44c90d
prevent dfu 832 bootloader on 840 and vice versa
2018-08-09 12:37:39 +07:00
hathach
25d3da0511
change dev-type for nrf52840
...
- add all-board, all-beta, all-release target
2018-08-09 11:35:05 +07:00
hathach
f41c039228
move boards.h to src
2018-08-08 15:19:02 +07:00
hathach
6f40f02537
more clean up
2018-08-08 00:41:41 +07:00
hathach
8c33712848
move a file
2018-08-07 22:19:57 +07:00
hathach
0e9d4f4341
clean up blue led blink
2018-08-07 22:09:51 +07:00
hathach
b1c6276a93
bootloader for nrf52832 seems to work well
2018-08-07 16:51:08 +07:00
hathach
dfd5613a7e
able to build with pca10056 & feather52832
2018-08-07 14:36:38 +07:00
hathach
907272b68f
supporting feather52832
2018-08-07 00:55:25 +07:00
hathach
98a1304881
update tusb
2018-07-15 00:02:44 +07:00
hathach
e727bd215c
disable CFG_TUD_CDC_FLUSH_ON_SOF to prevent usbd overflow
2018-06-23 13:24:21 +07:00
hathach
3f8fba843c
adding uf2 files
2018-06-19 22:12:01 +07:00
