bootloader: start removing bluetooth support

We don't need bluetooth support for Simmel.

Signed-off-by: Sean Cross <sean@xobs.io>
This commit is contained in:
Sean Cross 2020-04-17 10:45:11 +08:00
parent 79a6a0c4f7
commit 7d822f4df4
5 changed files with 29 additions and 156 deletions

View File

@ -321,7 +321,7 @@ uint32_t bootloader_init(void)
}
uint32_t bootloader_dfu_start(bool ota, uint32_t timeout_ms)
uint32_t bootloader_dfu_start(uint32_t timeout_ms)
{
uint32_t err_code;
@ -329,23 +329,17 @@ uint32_t bootloader_dfu_start(bool ota, uint32_t timeout_ms)
err_code = dfu_init();
VERIFY_SUCCESS(err_code);
if ( ota )
// timeout_ms > 0 is forced startup DFU
if ( timeout_ms )
{
err_code = dfu_transport_ble_update_start();
}else
{
// timeout_ms > 0 is forced startup DFU
if ( timeout_ms )
{
dfu_startup_packet_received = false;
dfu_startup_packet_received = false;
app_timer_create(&_dfu_startup_timer, APP_TIMER_MODE_SINGLE_SHOT, dfu_startup_timer_handler);
app_timer_start(_dfu_startup_timer, APP_TIMER_TICKS(timeout_ms), NULL);
}
err_code = dfu_transport_serial_update_start();
app_timer_create(&_dfu_startup_timer, APP_TIMER_MODE_SINGLE_SHOT, dfu_startup_timer_handler);
app_timer_start(_dfu_startup_timer, APP_TIMER_TICKS(timeout_ms), NULL);
}
err_code = dfu_transport_serial_update_start();
wait_for_events();
return err_code;

View File

@ -45,7 +45,7 @@ bool bootloader_app_is_valid(uint32_t app_addr);
*
* @retval NRF_SUCCESS If new application image was successfully transferred.
*/
uint32_t bootloader_dfu_start(bool ota, uint32_t timeout_ms);
uint32_t bootloader_dfu_start(uint32_t timeout_ms);
/**@brief Function for exiting bootloader and booting into application.
*

View File

@ -40,6 +40,7 @@
#endif
//------------- IMPLEMENTATION -------------//
#if BUTTONS_NUMBER >= 2
void button_init(uint32_t pin)
{
if ( BUTTON_PULL == NRF_GPIO_PIN_PULLDOWN )
@ -51,12 +52,15 @@ void button_init(uint32_t pin)
nrf_gpio_cfg_sense_input(pin, BUTTON_PULL, NRF_GPIO_PIN_SENSE_LOW);
}
}
#endif
#if BUTTONS_NUMBER >= 2
bool button_pressed(uint32_t pin)
{
uint32_t const active_state = (BUTTON_PULL == NRF_GPIO_PIN_PULLDOWN ? 1 : 0);
return nrf_gpio_pin_read(pin) == active_state;
}
#endif
void board_init(void)
{
@ -67,9 +71,11 @@ void board_init(void)
NRF_CLOCK->LFCLKSRC = CLOCK_LFCLKSRC_SRC_RC;
NRF_CLOCK->TASKS_LFCLKSTART = 1UL;
#if BUTTONS_NUMBER >= 2
button_init(BUTTON_DFU);
button_init(BUTTON_FRESET);
NRFX_DELAY_US(100); // wait for the pin state is stable
#endif // BUTTONS >= 2
// use PMW0 for LED RED
led_pwm_init(LED_PRIMARY, LED_PRIMARY_PIN);

View File

@ -94,11 +94,15 @@ void led_tick(void);
//--------------------------------------------------------------------+
// Make sure we have at least two buttons (DFU + FRESET since DFU+FRST=OTA)
#if BUTTONS_NUMBER < 2
#error "At least two buttons required in the BSP (see 'BUTTONS_NUMBER')"
#endif
#define button_init(pin)
#define button_pressed(pin) false
#else
// #error "At least two buttons required in the BSP (see 'BUTTONS_NUMBER')"
// #endif
void button_init(uint32_t pin);
bool button_pressed(uint32_t pin);
#endif
bool is_ota(void);

View File

@ -136,17 +136,15 @@ enum { BLE_CONN_CFG_HIGH_BANDWIDTH = 1 };
void adafruit_factory_reset(void);
static uint32_t softdev_init(bool init_softdevice);
uint32_t* dbl_reset_mem = ((uint32_t*) DFU_DBL_RESET_MEM );
// true if ble, false if serial
bool _ota_dfu = false;
bool _ota_connected = false;
bool is_ota(void)
{
return _ota_dfu;
return false;
}
void softdev_mbr_init(void)
@ -160,14 +158,11 @@ int main(void)
// SD is already Initialized in case of BOOTLOADER_DFU_OTA_MAGIC
bool sd_inited = (NRF_POWER->GPREGRET == DFU_MAGIC_OTA_APPJUM);
// Start Bootloader in BLE OTA mode
_ota_dfu = (NRF_POWER->GPREGRET == DFU_MAGIC_OTA_APPJUM) || (NRF_POWER->GPREGRET == DFU_MAGIC_OTA_RESET);
// Serial only mode
bool serial_only_dfu = (NRF_POWER->GPREGRET == DFU_MAGIC_SERIAL_ONLY_RESET);
// start either serial, uf2 or ble
bool dfu_start = _ota_dfu || serial_only_dfu || (NRF_POWER->GPREGRET == DFU_MAGIC_UF2_RESET) ||
bool dfu_start = serial_only_dfu || (NRF_POWER->GPREGRET == DFU_MAGIC_UF2_RESET) ||
(((*dbl_reset_mem) == DFU_DBL_RESET_MAGIC) && (NRF_POWER->RESETREAS & POWER_RESETREAS_RESETPIN_Msk));
// Clear GPREGRET if it is our values
@ -199,9 +194,6 @@ int main(void)
// DFU button pressed
dfu_start = dfu_start || button_pressed(BUTTON_DFU);
// DFU + FRESET are pressed --> OTA
_ota_dfu = _ota_dfu || ( button_pressed(BUTTON_DFU) && button_pressed(BUTTON_FRESET) ) ;
bool const valid_app = bootloader_app_is_valid(DFU_BANK_0_REGION_START);
bool const just_start_app = valid_app && !dfu_start && (*dbl_reset_mem) == DFU_DBL_RESET_APP;
@ -221,7 +213,7 @@ int main(void)
* Note: Supposedly during this time if RST is press, it will count as double reset.
* However Double Reset WONT work with nrf52832 since its SRAM got cleared anyway.
*/
bootloader_dfu_start(false, DFU_SERIAL_STARTUP_INTERVAL);
bootloader_dfu_start(DFU_SERIAL_STARTUP_INTERVAL);
#else
// if RST is pressed during this delay --> if will enter dfu
NRFX_DELAY_MS(DFU_DBL_RESET_DELAY);
@ -235,28 +227,13 @@ int main(void)
if ( dfu_start || !valid_app )
{
if ( _ota_dfu )
{
led_state(STATE_BLE_DISCONNECTED);
softdev_init(!sd_inited);
sd_inited = true;
}
else
{
led_state(STATE_USB_UNMOUNTED);
usb_init(serial_only_dfu);
}
led_state(STATE_USB_UNMOUNTED);
usb_init(serial_only_dfu);
// Initiate an update of the firmware.
APP_ERROR_CHECK( bootloader_dfu_start(_ota_dfu, 0) );
APP_ERROR_CHECK( bootloader_dfu_start(0) );
if ( _ota_dfu )
{
sd_softdevice_disable();
}else
{
usb_teardown();
}
usb_teardown();
}
// Adafruit Factory reset
@ -304,77 +281,6 @@ void adafruit_factory_reset(void)
led_state(STATE_FACTORY_RESET_FINISHED);
}
/**
* Initializes the SoftDevice and the BLE event interrupt.
* @param[in] init_softdevice true if SoftDevice should be initialized. The SoftDevice must only
* be initialized if a chip reset has occured. Soft reset (jump ) from
* application must not reinitialize the SoftDevice.
*/
static uint32_t softdev_init(bool init_softdevice)
{
if (init_softdevice) softdev_mbr_init();
// map vector table to bootloader address
APP_ERROR_CHECK( sd_softdevice_vector_table_base_set(BOOTLOADER_REGION_START) );
// Enable Softdevice, Use Internal OSC to compatible with all boards
nrf_clock_lf_cfg_t clock_cfg =
{
.source = NRF_CLOCK_LF_SRC_RC,
.rc_ctiv = 16,
.rc_temp_ctiv = 2,
.accuracy = NRF_CLOCK_LF_ACCURACY_250_PPM
};
APP_ERROR_CHECK( sd_softdevice_enable(&clock_cfg, app_error_fault_handler) );
sd_nvic_EnableIRQ(SD_EVT_IRQn);
/*------------- Configure BLE params -------------*/
extern uint32_t __data_start__[]; // defined in linker
uint32_t ram_start = (uint32_t) __data_start__;
ble_cfg_t blecfg;
// Configure the maximum number of connections.
varclr(&blecfg);
blecfg.gap_cfg.role_count_cfg.adv_set_count = 1;
blecfg.gap_cfg.role_count_cfg.periph_role_count = 1;
blecfg.gap_cfg.role_count_cfg.central_role_count = 0;
blecfg.gap_cfg.role_count_cfg.central_sec_count = 0;
APP_ERROR_CHECK( sd_ble_cfg_set(BLE_GAP_CFG_ROLE_COUNT, &blecfg, ram_start) );
// NRF_DFU_BLE_REQUIRES_BONDS
varclr(&blecfg);
blecfg.gatts_cfg.service_changed.service_changed = 1;
APP_ERROR_CHECK( sd_ble_cfg_set(BLE_GATTS_CFG_SERVICE_CHANGED, &blecfg, ram_start) );
// ATT MTU
varclr(&blecfg);
blecfg.conn_cfg.conn_cfg_tag = BLE_CONN_CFG_HIGH_BANDWIDTH;
blecfg.conn_cfg.params.gatt_conn_cfg.att_mtu = BLEGATT_ATT_MTU_MAX;
APP_ERROR_CHECK( sd_ble_cfg_set(BLE_CONN_CFG_GATT, &blecfg, ram_start) );
// Event Length + HVN queue + WRITE CMD queue setting affecting bandwidth
varclr(&blecfg);
blecfg.conn_cfg.conn_cfg_tag = BLE_CONN_CFG_HIGH_BANDWIDTH;
blecfg.conn_cfg.params.gap_conn_cfg.conn_count = 1;
blecfg.conn_cfg.params.gap_conn_cfg.event_length = BLEGAP_EVENT_LENGTH;
APP_ERROR_CHECK( sd_ble_cfg_set(BLE_CONN_CFG_GAP, &blecfg, ram_start) );
// Enable BLE stack.
// Note: Interrupt state (enabled, forwarding) is not work properly if not enable ble
APP_ERROR_CHECK( sd_ble_enable(&ram_start) );
#if 0
ble_opt_t opt;
varclr(&opt);
opt.common_opt.conn_evt_ext.enable = 1; // enable Data Length Extension
APP_ERROR_CHECK( sd_ble_opt_set(BLE_COMMON_OPT_CONN_EVT_EXT, &opt) );
#endif
return NRF_SUCCESS;
}
//--------------------------------------------------------------------+
// Error Handler
@ -395,43 +301,6 @@ void assert_nrf_callback (uint16_t line_num, uint8_t const * p_file_name)
/* SoftDevice Event handler
*------------------------------------------------------------------*/
// Process BLE event from SD
uint32_t proc_ble(void)
{
__ALIGN(4) uint8_t ev_buf[ BLE_EVT_LEN_MAX(BLEGATT_ATT_MTU_MAX) ];
uint16_t ev_len = BLE_EVT_LEN_MAX(BLEGATT_ATT_MTU_MAX);
// Get BLE Event
uint32_t err = sd_ble_evt_get(ev_buf, &ev_len);
// Handle valid event, ignore error
if( NRF_SUCCESS == err)
{
ble_evt_t* evt = (ble_evt_t*) ev_buf;
switch (evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
_ota_connected = true;
led_state(STATE_BLE_CONNECTED);
break;
case BLE_GAP_EVT_DISCONNECTED:
_ota_connected = false;
led_state(STATE_BLE_DISCONNECTED);
break;
default: break;
}
// from dfu_transport_ble
extern void ble_evt_dispatch(ble_evt_t * p_ble_evt);
ble_evt_dispatch(evt);
}
return err;
}
// process SOC event from SD
uint32_t proc_soc(void)
{
@ -462,7 +331,7 @@ void ada_sd_task(void* evt_data, uint16_t evt_size)
(void) evt_size;
// process BLE and SOC until there is no more events
while( (NRF_ERROR_NOT_FOUND != proc_ble()) || (NRF_ERROR_NOT_FOUND != proc_soc()) )
while( NRF_ERROR_NOT_FOUND != proc_soc() )
{
}