Commit Graph

13 Commits

Author SHA1 Message Date
c02b3ef4ac hardware: sch: add PMOD connector
Signed-off-by: Sean Cross <sean@xobs.io>
2018-11-02 11:37:40 +08:00
b26b71343d hardware: first fully-routed PCB
The PCB is terrible, and probably would have all sorts of issues.  Will
rip it up and try again tomorrow.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-31 22:28:10 +08:00
1acf50df39 hardware: sch: use footprints from tomu-fpga
Use our local copy of footprints, which are guaranteed not to change
between Kicad versions.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-31 16:03:06 +08:00
061b2c81a7 hardware: sch: map remaining footprints
Add footprints for the remaining schematic components.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-31 12:57:33 +08:00
a715f5c728 hardware: add testpoints for SPI programming
This will become necessary when doing factory burning.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-31 10:54:13 +08:00
30b7610996 pcb: hook up more debug wires
We have spare pins, so run more debug wires.

Many of these will probably get cut when doing the PCB layout.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-31 10:45:27 +08:00
4fe5f8f629 hardware: sch: use raspberry pi header, rework signaling
Rework the signaling to send everything to a Raspberry Pi header.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-31 10:36:01 +08:00
0973972464 hardware: pcb: add SPI debug header
This will be used to program SPI during board bringup.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 22:28:08 +08:00
78bb283bc6 hardware: sch: populate SPI, /RESET pullups
It turns out these resistors are important.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 19:21:01 +08:00
f06ef4a7d5 hardware: sch: add crystal, VCCPLL regulator
Add a crystal, so we can test to make sure it works.

Also add a second regulator dedicated to VCCPLL in an effort to
cost-down the capacitor and large components that shouldn't be
necessary.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 19:14:33 +08:00
ab18c90450 hardware: sch: specify spinor part
SPINOR parts are largely interchangeable.  Pick one.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 17:09:11 +08:00
c7bfc248af pcb: sch: renumber schematic
Renumber the schematic again, as things have shifted around a bit.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 17:06:04 +08:00
ab33b4a0a1 hardware: rename tomu-fpga to pcb
This more closely reflects what it actually is.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 17:05:02 +08:00