64 lines
2.3 KiB
Markdown
64 lines
2.3 KiB
Markdown
# Adafruit nRF52840 Bootloader
|
|
|
|
This repository contains the USB bootloader for Adafruit nRF52840 boards (1MB
|
|
flash, 256KB SRAM). This repository depend on [tinyusb](https://github.com/hathach/tinyusb/tree/develop) as submodule. After
|
|
cloning this repo you need to run the following command:
|
|
|
|
git submodule update --init
|
|
|
|
## Option 1: Build with makefile
|
|
|
|
Navigate to `src/singlebank` (recommended) or `src/dualbank` (work in progress),
|
|
and use feather52840 target for building bootloader.
|
|
|
|
make feather52840
|
|
|
|
To flash bootloader + S140
|
|
|
|
make flash_feather52840
|
|
|
|
To only flash S140
|
|
|
|
make flash_sd
|
|
|
|
### Common makefile problems
|
|
|
|
#### 1. `arm-none-eabi-gcc`: No such file or directory
|
|
|
|
If you get the following error ...
|
|
|
|
$ make feather52840
|
|
Compiling file: dfu_single_bank.c
|
|
/bin/sh: /usr/bin/arm-none-eabi-gcc: No such file or directory
|
|
make: *** [_build/dfu_single_bank.o] Error 127
|
|
|
|
... you may need to edit the `Makefile` (for example `src/singlebank/Makefile`),
|
|
and update the `GNU_INSTALL_ROOT` to point to the root path of your GCC ARM
|
|
toolchain.
|
|
|
|
#### 2. `mergehex: No such file or directory`
|
|
|
|
Make sure that `mergehex` is available from the command-line. This binary is
|
|
part of of Nordic's [nRF5x Command Line Tools](http://infocenter.nordicsemi.com/index.jsp?topic=%2Fcom.nordic.infocenter.tools%2Fdita%2Ftools%2Fnrf5x_command_line_tools%2Fnrf5x_installation.html).
|
|
|
|
#### 3. `make: nrfjprog: No such file or directory`
|
|
|
|
Make sure that `nrfjprog` is available from the command-line. This binary is
|
|
part of of Nordic's [nRF5x Command Line Tools](http://infocenter.nordicsemi.com/index.jsp?topic=%2Fcom.nordic.infocenter.tools%2Fdita%2Ftools%2Fnrf5x_command_line_tools%2Fnrf5x_installation.html).
|
|
|
|
On POSIX-type systems you can temporarily add the path to `nrfjprog` via a
|
|
variation on the following command:
|
|
|
|
```
|
|
$ export PATH=$PATH:/Users/Kevin/Downloads/nRF5x-Command-Line-Tools_9_7_2_OSX/nrfjprog
|
|
```
|
|
|
|
## Option 2: Build using Segger Embeded Studio
|
|
|
|
For better debugging you can also use [SES](https://www.segger.com/products/development-tools/embedded-studio/).
|
|
The project file is located at `src/segger/nrf52840_bootloader.emProject`.
|
|
|
|
> **Note**: SES only flashes the bootloader when you click download, you need to
|
|
flash Softdevice beforehand if you haven't done so ( use `make flash_sd`
|
|
mentioned above )
|