more clean up
This commit is contained in:
hathach
parent
59999d30d2
commit
f83e47c83b
553
src/sdk_config.h
553
src/sdk_config.h
|
|
@ -43,545 +43,78 @@
|
|||
#ifndef SDK_CONFIG_H
|
||||
#define SDK_CONFIG_H
|
||||
|
||||
//==========================================================
|
||||
// <e> HCI_SLIP_ENABLED - hci_slip - SLIP protocol implementation used by HCI
|
||||
//==========================================================
|
||||
#ifndef HCI_SLIP_ENABLED
|
||||
#define HCI_SLIP_ENABLED 1
|
||||
#endif
|
||||
// <o> HCI_UART_BAUDRATE - Default Baudrate
|
||||
#define HCI_SLIP_ENABLED 1
|
||||
|
||||
// <323584=> 1200 baud
|
||||
// <643072=> 2400 baud
|
||||
// <1290240=> 4800 baud
|
||||
// <2576384=> 9600 baud
|
||||
// <3862528=> 14400 baud
|
||||
// <5152768=> 19200 baud
|
||||
// <7716864=> 28800 baud
|
||||
// <10289152=> 38400 baud
|
||||
// <15400960=> 57600 baud
|
||||
// <20615168=> 76800 baud
|
||||
// <30801920=> 115200 baud
|
||||
// <61865984=> 230400 baud
|
||||
// <67108864=> 250000 baud
|
||||
// <121634816=> 460800 baud
|
||||
// <251658240=> 921600 baud
|
||||
// <268435456=> 1000000 baud
|
||||
#define HCI_UART_BAUDRATE UART_BAUDRATE_BAUDRATE_Baud115200
|
||||
#define HCI_UART_FLOW_CONTROL 0
|
||||
#define HCI_UART_RX_PIN 8
|
||||
#define HCI_UART_TX_PIN 6
|
||||
#define HCI_UART_RTS_PIN 5
|
||||
#define HCI_UART_CTS_PIN 7
|
||||
|
||||
#ifndef HCI_UART_BAUDRATE
|
||||
#define HCI_UART_BAUDRATE 30801920
|
||||
#endif
|
||||
|
||||
// <o> HCI_UART_FLOW_CONTROL - Hardware Flow Control
|
||||
|
||||
// <0=> Disabled
|
||||
// <1=> Enabled
|
||||
|
||||
#ifndef HCI_UART_FLOW_CONTROL
|
||||
#define HCI_UART_FLOW_CONTROL 0
|
||||
#endif
|
||||
|
||||
// <o> HCI_UART_RX_PIN - UART RX pin
|
||||
#ifndef HCI_UART_RX_PIN
|
||||
#define HCI_UART_RX_PIN 8
|
||||
#endif
|
||||
|
||||
// <o> HCI_UART_TX_PIN - UART TX pin
|
||||
#ifndef HCI_UART_TX_PIN
|
||||
#define HCI_UART_TX_PIN 6
|
||||
#endif
|
||||
|
||||
// <o> HCI_UART_RTS_PIN - UART RTS pin
|
||||
#ifndef HCI_UART_RTS_PIN
|
||||
#define HCI_UART_RTS_PIN 5
|
||||
#endif
|
||||
|
||||
// <o> HCI_UART_CTS_PIN - UART CTS pin
|
||||
#ifndef HCI_UART_CTS_PIN
|
||||
#define HCI_UART_CTS_PIN 7
|
||||
#endif
|
||||
|
||||
|
||||
#ifndef HCI_TRANSPORT_ENABLED
|
||||
#define HCI_TRANSPORT_ENABLED 1
|
||||
#endif
|
||||
// <o> HCI_MAX_PACKET_SIZE_IN_BITS - Maximum size of a single application packet in bits.
|
||||
#ifndef HCI_MAX_PACKET_SIZE_IN_BITS
|
||||
#define HCI_MAX_PACKET_SIZE_IN_BITS 8000
|
||||
#endif
|
||||
|
||||
|
||||
#ifndef NRF_DFU_BLE_REQUIRES_BONDS
|
||||
#define NRF_DFU_BLE_REQUIRES_BONDS 0
|
||||
#endif
|
||||
#define HCI_TRANSPORT_ENABLED 1
|
||||
#define HCI_MAX_PACKET_SIZE_IN_BITS 8000
|
||||
|
||||
//==========================================================
|
||||
|
||||
// <h> nRF_Drivers
|
||||
// <e> HCI_MEM_POOL_ENABLED - hci_mem_pool - memory pool implementation used by HCI
|
||||
//==========================================================
|
||||
#define HCI_MEM_POOL_ENABLED 1
|
||||
#define HCI_TX_BUF_SIZE 600
|
||||
#define HCI_RX_BUF_SIZE 600
|
||||
#define HCI_RX_BUF_QUEUE_SIZE 4
|
||||
|
||||
//==========================================================
|
||||
// <e> CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver
|
||||
//==========================================================
|
||||
#ifndef CLOCK_ENABLED
|
||||
#define CLOCK_ENABLED 0
|
||||
#endif
|
||||
// <o> CLOCK_CONFIG_XTAL_FREQ - HF XTAL Frequency
|
||||
|
||||
// <0=> Default (64 MHz)
|
||||
|
||||
#ifndef CLOCK_CONFIG_XTAL_FREQ
|
||||
#define CLOCK_CONFIG_XTAL_FREQ 0
|
||||
#endif
|
||||
|
||||
// <o> CLOCK_CONFIG_LF_SRC - LF Clock Source
|
||||
|
||||
// <0=> RC
|
||||
// <1=> XTAL
|
||||
// <2=> Synth
|
||||
|
||||
#ifndef CLOCK_CONFIG_LF_SRC
|
||||
#define CLOCK_CONFIG_LF_SRC 1
|
||||
#endif
|
||||
|
||||
// <o> CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority
|
||||
|
||||
|
||||
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
||||
// <0=> 0 (highest)
|
||||
// <1=> 1
|
||||
// <2=> 2
|
||||
// <3=> 3
|
||||
// <4=> 4
|
||||
// <5=> 5
|
||||
// <6=> 6
|
||||
// <7=> 7
|
||||
|
||||
#ifndef CLOCK_CONFIG_IRQ_PRIORITY
|
||||
#define CLOCK_CONFIG_IRQ_PRIORITY 7
|
||||
#endif
|
||||
|
||||
// </e>
|
||||
|
||||
// </e>
|
||||
|
||||
// <q> EGU_ENABLED - nrf_drv_swi - SWI(EGU) peripheral driver
|
||||
|
||||
|
||||
#ifndef EGU_ENABLED
|
||||
#define EGU_ENABLED 0
|
||||
#endif
|
||||
|
||||
// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver
|
||||
//==========================================================
|
||||
#ifndef GPIOTE_ENABLED
|
||||
#define GPIOTE_ENABLED 0
|
||||
#endif
|
||||
// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins
|
||||
#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
|
||||
#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
|
||||
#endif
|
||||
|
||||
// <o> GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority
|
||||
|
||||
|
||||
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
||||
// <0=> 0 (highest)
|
||||
// <1=> 1
|
||||
// <2=> 2
|
||||
// <3=> 3
|
||||
// <4=> 4
|
||||
// <5=> 5
|
||||
// <6=> 6
|
||||
// <7=> 7
|
||||
|
||||
#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
|
||||
#define GPIOTE_CONFIG_IRQ_PRIORITY 7
|
||||
#endif
|
||||
|
||||
// </e>
|
||||
|
||||
|
||||
|
||||
|
||||
// <q> PERIPHERAL_RESOURCE_SHARING_ENABLED - nrf_drv_common - Peripheral drivers common module
|
||||
|
||||
|
||||
#ifndef PERIPHERAL_RESOURCE_SHARING_ENABLED
|
||||
#define PERIPHERAL_RESOURCE_SHARING_ENABLED 0
|
||||
#endif
|
||||
|
||||
// <e> POWER_ENABLED - nrf_drv_power - POWER peripheral driver
|
||||
//==========================================================
|
||||
#ifndef POWER_ENABLED
|
||||
#define POWER_ENABLED 1
|
||||
#endif
|
||||
// <o> POWER_CONFIG_IRQ_PRIORITY - Interrupt priority
|
||||
|
||||
|
||||
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
||||
// <0=> 0 (highest)
|
||||
// <1=> 1
|
||||
// <2=> 2
|
||||
// <3=> 3
|
||||
// <4=> 4
|
||||
// <5=> 5
|
||||
// <6=> 6
|
||||
// <7=> 7
|
||||
|
||||
#ifndef POWER_CONFIG_IRQ_PRIORITY
|
||||
#define POWER_CONFIG_IRQ_PRIORITY 7
|
||||
#endif
|
||||
|
||||
// <q> POWER_CONFIG_DEFAULT_DCDCEN - The default configuration of main DCDC regulator
|
||||
|
||||
|
||||
// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
|
||||
|
||||
#ifndef POWER_CONFIG_DEFAULT_DCDCEN
|
||||
#define POWER_CONFIG_DEFAULT_DCDCEN 0
|
||||
#endif
|
||||
|
||||
// <q> POWER_CONFIG_DEFAULT_DCDCENHV - The default configuration of High Voltage DCDC regulator
|
||||
|
||||
|
||||
// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
|
||||
|
||||
#ifndef POWER_CONFIG_DEFAULT_DCDCENHV
|
||||
#define POWER_CONFIG_DEFAULT_DCDCENHV 0
|
||||
#endif
|
||||
|
||||
// </e>
|
||||
|
||||
|
||||
// <e> RTC_ENABLED - nrf_drv_rtc - RTC peripheral driver
|
||||
//==========================================================
|
||||
#ifndef RTC_ENABLED
|
||||
#define RTC_ENABLED 0
|
||||
#endif
|
||||
// <o> RTC_DEFAULT_CONFIG_FREQUENCY - Frequency <16-32768>
|
||||
|
||||
|
||||
#ifndef RTC_DEFAULT_CONFIG_FREQUENCY
|
||||
#define RTC_DEFAULT_CONFIG_FREQUENCY 32768
|
||||
#endif
|
||||
|
||||
// <q> RTC_DEFAULT_CONFIG_RELIABLE - Ensures safe compare event triggering
|
||||
|
||||
|
||||
#ifndef RTC_DEFAULT_CONFIG_RELIABLE
|
||||
#define RTC_DEFAULT_CONFIG_RELIABLE 0
|
||||
#endif
|
||||
|
||||
// <o> RTC_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
||||
|
||||
|
||||
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
||||
// <0=> 0 (highest)
|
||||
// <1=> 1
|
||||
// <2=> 2
|
||||
// <3=> 3
|
||||
// <4=> 4
|
||||
// <5=> 5
|
||||
// <6=> 6
|
||||
// <7=> 7
|
||||
|
||||
#ifndef RTC_DEFAULT_CONFIG_IRQ_PRIORITY
|
||||
#define RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7
|
||||
#endif
|
||||
|
||||
// <q> RTC0_ENABLED - Enable RTC0 instance
|
||||
|
||||
|
||||
#ifndef RTC0_ENABLED
|
||||
#define RTC0_ENABLED 0
|
||||
#endif
|
||||
|
||||
// <q> RTC1_ENABLED - Enable RTC1 instance
|
||||
|
||||
|
||||
#ifndef RTC1_ENABLED
|
||||
#define RTC1_ENABLED 0
|
||||
#endif
|
||||
|
||||
// <q> RTC2_ENABLED - Enable RTC2 instance
|
||||
|
||||
|
||||
#ifndef RTC2_ENABLED
|
||||
#define RTC2_ENABLED 0
|
||||
#endif
|
||||
|
||||
// <o> NRF_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt
|
||||
#ifndef NRF_MAXIMUM_LATENCY_US
|
||||
#define NRF_MAXIMUM_LATENCY_US 2000
|
||||
#endif
|
||||
|
||||
// </e>
|
||||
|
||||
|
||||
// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver
|
||||
//==========================================================
|
||||
#ifndef UART_ENABLED
|
||||
#define UART_ENABLED 1
|
||||
#endif
|
||||
// <o> UART_DEFAULT_CONFIG_HWFC - Hardware Flow Control
|
||||
|
||||
// <0=> Disabled
|
||||
// <1=> Enabled
|
||||
#define UART_ENABLED 1
|
||||
#define UART_DEFAULT_CONFIG_HWFC 0
|
||||
#define UART_DEFAULT_CONFIG_PARITY 0
|
||||
#define UART_DEFAULT_CONFIG_BAUDRATE UART_BAUDRATE_BAUDRATE_Baud115200
|
||||
#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
|
||||
#define UART_EASY_DMA_SUPPORT 1
|
||||
#define UART_LEGACY_SUPPORT 1
|
||||
|
||||
#ifndef UART_DEFAULT_CONFIG_HWFC
|
||||
#define UART_DEFAULT_CONFIG_HWFC 0
|
||||
#endif
|
||||
#define UART0_ENABLED 1
|
||||
#define UART0_CONFIG_USE_EASY_DMA 0
|
||||
|
||||
// <o> UART_DEFAULT_CONFIG_PARITY - Parity
|
||||
|
||||
// <0=> Excluded
|
||||
// <14=> Included
|
||||
|
||||
#ifndef UART_DEFAULT_CONFIG_PARITY
|
||||
#define UART_DEFAULT_CONFIG_PARITY 0
|
||||
#endif
|
||||
|
||||
// <o> UART_DEFAULT_CONFIG_BAUDRATE - Default Baudrate
|
||||
|
||||
// <323584=> 1200 baud
|
||||
// <643072=> 2400 baud
|
||||
// <1290240=> 4800 baud
|
||||
// <2576384=> 9600 baud
|
||||
// <3862528=> 14400 baud
|
||||
// <5152768=> 19200 baud
|
||||
// <7716864=> 28800 baud
|
||||
// <10289152=> 38400 baud
|
||||
// <15400960=> 57600 baud
|
||||
// <20615168=> 76800 baud
|
||||
// <30801920=> 115200 baud
|
||||
// <61865984=> 230400 baud
|
||||
// <67108864=> 250000 baud
|
||||
// <121634816=> 460800 baud
|
||||
// <251658240=> 921600 baud
|
||||
// <268435456=> 1000000 baud
|
||||
|
||||
#ifndef UART_DEFAULT_CONFIG_BAUDRATE
|
||||
#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
|
||||
#endif
|
||||
|
||||
// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
||||
|
||||
|
||||
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
||||
// <0=> 0 (highest)
|
||||
// <1=> 1
|
||||
// <2=> 2
|
||||
// <3=> 3
|
||||
// <4=> 4
|
||||
// <5=> 5
|
||||
// <6=> 6
|
||||
// <7=> 7
|
||||
|
||||
#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
|
||||
#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
|
||||
#endif
|
||||
|
||||
// <q> UART_EASY_DMA_SUPPORT - Driver supporting EasyDMA
|
||||
|
||||
|
||||
#ifndef UART_EASY_DMA_SUPPORT
|
||||
#define UART_EASY_DMA_SUPPORT 1
|
||||
#endif
|
||||
|
||||
// <q> UART_LEGACY_SUPPORT - Driver supporting Legacy mode
|
||||
|
||||
|
||||
#ifndef UART_LEGACY_SUPPORT
|
||||
#define UART_LEGACY_SUPPORT 1
|
||||
#endif
|
||||
|
||||
// <e> UART0_ENABLED - Enable UART0 instance
|
||||
//==========================================================
|
||||
#ifndef UART0_ENABLED
|
||||
#define UART0_ENABLED 1
|
||||
#endif
|
||||
// <q> UART0_CONFIG_USE_EASY_DMA - Default setting for using EasyDMA
|
||||
|
||||
|
||||
#ifndef UART0_CONFIG_USE_EASY_DMA
|
||||
#define UART0_CONFIG_USE_EASY_DMA 0
|
||||
#endif
|
||||
|
||||
// </e>
|
||||
|
||||
// <e> UART1_ENABLED - Enable UART1 instance
|
||||
// <e> APP_UART_ENABLED - app_uart - UART driver
|
||||
//==========================================================
|
||||
#ifndef UART1_ENABLED
|
||||
#define UART1_ENABLED 0
|
||||
#endif
|
||||
// <q> UART1_CONFIG_USE_EASY_DMA - Default setting for using EasyDMA
|
||||
|
||||
|
||||
#ifndef UART1_CONFIG_USE_EASY_DMA
|
||||
#define UART1_CONFIG_USE_EASY_DMA 1
|
||||
#endif
|
||||
|
||||
// </h>
|
||||
//==========================================================
|
||||
|
||||
// <h> nRF_Libraries
|
||||
#define APP_UART_ENABLED 1
|
||||
#define APP_UART_DRIVER_INSTANCE 0
|
||||
|
||||
//==========================================================
|
||||
// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
|
||||
//==========================================================
|
||||
#ifndef APP_SCHEDULER_ENABLED
|
||||
#define APP_SCHEDULER_ENABLED 1
|
||||
#endif
|
||||
// <q> APP_SCHEDULER_WITH_PAUSE - Enabling pause feature
|
||||
|
||||
|
||||
#ifndef APP_SCHEDULER_WITH_PAUSE
|
||||
#define APP_SCHEDULER_WITH_PAUSE 0
|
||||
#endif
|
||||
|
||||
// <q> APP_SCHEDULER_WITH_PROFILER - Enabling scheduler profiling
|
||||
|
||||
|
||||
#ifndef APP_SCHEDULER_WITH_PROFILER
|
||||
#define APP_SCHEDULER_WITH_PROFILER 0
|
||||
#endif
|
||||
|
||||
// </e>
|
||||
#define APP_SCHEDULER_ENABLED 1
|
||||
#define APP_SCHEDULER_WITH_PAUSE 0
|
||||
#define APP_SCHEDULER_WITH_PROFILER 0
|
||||
|
||||
//==========================================================
|
||||
// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
|
||||
//==========================================================
|
||||
#ifndef APP_TIMER_ENABLED
|
||||
#define APP_TIMER_ENABLED 1
|
||||
#endif
|
||||
// <o> APP_TIMER_CONFIG_RTC_FREQUENCY - Configure RTC prescaler.
|
||||
|
||||
// <0=> 32768 Hz
|
||||
// <1=> 16384 Hz
|
||||
// <3=> 8192 Hz
|
||||
// <7=> 4096 Hz
|
||||
// <15=> 2048 Hz
|
||||
// <31=> 1024 Hz
|
||||
#define APP_TIMER_ENABLED 1
|
||||
|
||||
#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
|
||||
#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
|
||||
#endif
|
||||
|
||||
// <o> APP_TIMER_CONFIG_IRQ_PRIORITY - Interrupt priority
|
||||
|
||||
|
||||
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
||||
// <0=> 0 (highest)
|
||||
// <1=> 1
|
||||
// <2=> 2
|
||||
// <3=> 3
|
||||
// <4=> 4
|
||||
// <5=> 5
|
||||
// <6=> 6
|
||||
// <7=> 7
|
||||
|
||||
#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
|
||||
#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
|
||||
#endif
|
||||
|
||||
// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue.
|
||||
// <i> Size of the queue depends on how many timers are used
|
||||
// <i> in the system, how often timers are started and overall
|
||||
// <i> system latency. If queue size is too small app_timer calls
|
||||
// <i> will fail.
|
||||
|
||||
#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
|
||||
#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
|
||||
#endif
|
||||
|
||||
// <q> APP_TIMER_CONFIG_USE_SCHEDULER - Enable scheduling app_timer events to app_scheduler
|
||||
|
||||
|
||||
#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
|
||||
#define APP_TIMER_CONFIG_USE_SCHEDULER 1
|
||||
#endif
|
||||
|
||||
// <q> APP_TIMER_WITH_PROFILER - Enable app_timer profiling
|
||||
|
||||
|
||||
#ifndef APP_TIMER_WITH_PROFILER
|
||||
#define APP_TIMER_WITH_PROFILER 0
|
||||
#endif
|
||||
|
||||
// <q> APP_TIMER_KEEPS_RTC_ACTIVE - Enable RTC always on
|
||||
|
||||
#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
|
||||
#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
|
||||
#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
|
||||
#define APP_TIMER_CONFIG_USE_SCHEDULER 1
|
||||
#define APP_TIMER_WITH_PROFILER 0
|
||||
#define APP_TIMER_CONFIG_SWI_NUMBER 0
|
||||
|
||||
// <q> APP_TIMER_KEEPS_RTC_ACTIVE - Enable RTC always on
|
||||
// <i> If option is enabled RTC is kept running even if there is no active timers.
|
||||
// <i> This option can be used when app_timer is used for timestamping.
|
||||
|
||||
#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
|
||||
#define APP_TIMER_KEEPS_RTC_ACTIVE 0
|
||||
#define APP_TIMER_KEEPS_RTC_ACTIVE 0
|
||||
#endif
|
||||
|
||||
// <o> APP_TIMER_CONFIG_SWI_NUMBER - Configure SWI instance used.
|
||||
|
||||
// <0=> 0
|
||||
// <1=> 1
|
||||
|
||||
#ifndef APP_TIMER_CONFIG_SWI_NUMBER
|
||||
#define APP_TIMER_CONFIG_SWI_NUMBER 0
|
||||
#endif
|
||||
|
||||
// </e>
|
||||
|
||||
// <e> APP_UART_ENABLED - app_uart - UART driver
|
||||
//==========================================================
|
||||
#ifndef APP_UART_ENABLED
|
||||
#define APP_UART_ENABLED 1
|
||||
#endif
|
||||
// <o> APP_UART_DRIVER_INSTANCE - UART instance used
|
||||
|
||||
// <0=> 0
|
||||
|
||||
#ifndef APP_UART_DRIVER_INSTANCE
|
||||
#define APP_UART_DRIVER_INSTANCE 0
|
||||
#endif
|
||||
|
||||
// </e>
|
||||
#define CRC16_ENABLED 1
|
||||
#define NRF_STRERROR_ENABLED 1
|
||||
|
||||
|
||||
// <q> BUTTON_ENABLED - app_button - buttons handling module
|
||||
|
||||
|
||||
#ifndef BUTTON_ENABLED
|
||||
#define BUTTON_ENABLED 0
|
||||
#endif
|
||||
|
||||
// <q> CRC16_ENABLED - crc16 - CRC16 calculation routines
|
||||
|
||||
|
||||
#ifndef CRC16_ENABLED
|
||||
#define CRC16_ENABLED 1
|
||||
#endif
|
||||
|
||||
// <e> HCI_MEM_POOL_ENABLED - hci_mem_pool - memory pool implementation used by HCI
|
||||
//==========================================================
|
||||
#ifndef HCI_MEM_POOL_ENABLED
|
||||
#define HCI_MEM_POOL_ENABLED 1
|
||||
#endif
|
||||
// <o> HCI_TX_BUF_SIZE - TX buffer size in bytes.
|
||||
#ifndef HCI_TX_BUF_SIZE
|
||||
#define HCI_TX_BUF_SIZE 600
|
||||
#endif
|
||||
|
||||
// <o> HCI_RX_BUF_SIZE - RX buffer size in bytes.
|
||||
#ifndef HCI_RX_BUF_SIZE
|
||||
#define HCI_RX_BUF_SIZE 600
|
||||
#endif
|
||||
|
||||
// <o> HCI_RX_BUF_QUEUE_SIZE - RX buffer queue size.
|
||||
#ifndef HCI_RX_BUF_QUEUE_SIZE
|
||||
#define HCI_RX_BUF_QUEUE_SIZE 4
|
||||
#endif
|
||||
|
||||
// <q> NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string.
|
||||
#ifndef NRF_STRERROR_ENABLED
|
||||
#define NRF_STRERROR_ENABLED 1
|
||||
#endif
|
||||
|
||||
// <<< end of configuration section >>>
|
||||
#endif //SDK_CONFIG_H
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue