xobs
/
simmel-bootloader
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fix Readme formatting

This commit is contained in:
Zach Whitehead 2019-11-23 11:53:32 -05:00 committed by GitHub
parent f8fdf47823
commit cf6aca19b0
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
README.md
View File

@ -60,8 +60,8 @@ There are two pins, `DFU` and `FRST` that bootloader will check upon reset/power
- `Double Reset` Reset twice within 500 ms will enter DFU with UF2 and CDC support (only works with nRF52840)
- `DFU = LOW` and `FRST = HIGH`: Enter bootloader with UF2 and CDC support
- `DFU = LOW` and `FRST = LOW`: Enter bootloader with OTA, to upgrade with a mobile application such as Nordic nrfConnect/Toolbox
- `DFU = HIGH and `FRST = LOW`: Factory Reset mode: erase firmware application and its data
- `DFU = HIGH and `FRST = HIGH`: Go to application code if it is present, otherwise enter DFU with UF2
- `DFU = HIGH` and `FRST = LOW`: Factory Reset mode: erase firmware application and its data
- `DFU = HIGH` and `FRST = HIGH`: Go to application code if it is present, otherwise enter DFU with UF2
- The `GPREGRET` register can also be set to force the bootloader can enter any of above modes (plus a CDC-only mode for Arduino).
`GPREGRET` is set by the application before performing a soft reset.