xobs/simmel-bootloader
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

clean up

Browse Source
This commit is contained in:
hathach
2018-09-29 00:08:59 +07:00
parent 104a4713d0
commit 232bc3ab19
2 changed files with 1 additions and 90 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
src/main.c
View File

@@ -199,10 +199,8 @@ int main(void)
*/
bootloader_dfu_start(false, DFU_SERIAL_STARTUP_INTERVAL);
#else
led_on(LED_RED); // turn on LED to signal user
// if RST is pressed during this delay --> if will enter dfu
NRFX_DELAY_MS(DFU_DBL_RESET_DELAY);
led_off(LED_RED);
#endif
}
@@ -373,7 +371,7 @@ void app_error_fault_handler(uint32_t id, uint32_t pc, uint32_t info)
NVIC_SystemReset();
}
void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
void assert_nrf_callback (uint16_t line_num, uint8_t const * p_file_name)
{
app_error_fault_handler(0xDEADBEEF, 0, 0);
}

87
src/sdk_config.h
View File

@@ -420,53 +420,6 @@
#define UART1_CONFIG_USE_EASY_DMA 1
#endif
// </e>
// </e>
// <e> WDT_ENABLED - nrf_drv_wdt - WDT peripheral driver
//==========================================================
#ifndef WDT_ENABLED
#define WDT_ENABLED 0
#endif
// <o> WDT_CONFIG_BEHAVIOUR - WDT behavior in CPU SLEEP or HALT mode
// <1=> Run in SLEEP, Pause in HALT
// <8=> Pause in SLEEP, Run in HALT
// <9=> Run in SLEEP and HALT
// <0=> Pause in SLEEP and HALT
#ifndef WDT_CONFIG_BEHAVIOUR
#define WDT_CONFIG_BEHAVIOUR 1
#endif
// <o> WDT_CONFIG_RELOAD_VALUE - Reload value <15-4294967295>
#ifndef WDT_CONFIG_RELOAD_VALUE
#define WDT_CONFIG_RELOAD_VALUE 2000
#endif
// <o> WDT_CONFIG_IRQ_PRIORITY - Interrupt priority
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
// <0=> 0 (highest)
// <1=> 1
// <2=> 2
// <3=> 3
// <4=> 4
// <5=> 5
// <6=> 6
// <7=> 7
#ifndef WDT_CONFIG_IRQ_PRIORITY
#define WDT_CONFIG_IRQ_PRIORITY 7
#endif
// </e>
// </h>
//==========================================================
@@ -624,46 +577,6 @@
#define HCI_RX_BUF_QUEUE_SIZE 4
#endif
// </e>
// <e> NRF_FSTORAGE_ENABLED - nrf_fstorage - Flash abstraction library
//==========================================================
#ifndef NRF_FSTORAGE_ENABLED
#define NRF_FSTORAGE_ENABLED 1
#endif
// <h> nrf_fstorage_sd - Implementation using the SoftDevice.
// <i> Configuration options for the fstorage implementation using the SoftDevice.
//==========================================================
// <o> NRF_FSTORAGE_SD_QUEUE_SIZE - Size of the internal queue of operations.
// <i> Increase this value if API calls frequently return the error @ref NRF_ERROR_NO_MEM.
#ifndef NRF_FSTORAGE_SD_QUEUE_SIZE
#define NRF_FSTORAGE_SD_QUEUE_SIZE 8
#endif
// <o> NRF_FSTORAGE_SD_MAX_RETRIES - Maximum number of attempts at executing an operation when the SoftDevice is busy.
// <i> Increase this value if events frequently return the @ref NRF_ERROR_TIMEOUT error.
// <i> The SoftDevice might fail to schedule flash access due to high BLE activity.
#ifndef NRF_FSTORAGE_SD_MAX_RETRIES
#define NRF_FSTORAGE_SD_MAX_RETRIES 8
#endif
// <o> NRF_FSTORAGE_SD_MAX_WRITE_SIZE - Maximum number of bytes to be written to flash in a single operation.
// <i> This value must be a multiple of four.
// <i> Lowering this value can increase the chances of the SoftDevice being able to execute flash operations in between radio activity.
// <i> This value is bound by the maximum number of bytes that can be written to flash in a single call to @ref sd_flash_write.
// <i> That is 1024 bytes for nRF51 ICs and 4096 bytes for nRF52 ICs.
#ifndef NRF_FSTORAGE_SD_MAX_WRITE_SIZE
#define NRF_FSTORAGE_SD_MAX_WRITE_SIZE 20
#endif
// </h>
//==========================================================
// <q> NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string.
#ifndef NRF_STRERROR_ENABLED
#define NRF_STRERROR_ENABLED 1