xobs/fomu-flash
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
91b4a74dc8
fomu-flash/fomu-flash.c
Sean Cross f4d2c46eb3 fomu-flash: print out status registers as part of id 
Print the contents of SR1, SR2, and SR3.  Not all chips have SR3,
so this may be 0xff.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-12-18 20:32:10 -05:00

460 lines
11 KiB
C
Executable File
Raw Blame History

#include <stdint.h>
#include <stdio.h>
#include <fcntl.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <string.h>
#include <stdlib.h>
#include "rpi.h"
#include "spi.h"
#include "fpga.h"
#define S_MOSI 10
#define S_MISO 9
#define S_CLK 11
#define S_CE0 8
#define S_HOLD 25
#define S_WP 24
#define S_D0 S_MOSI
#define S_D1 S_MISO
#define S_D2 S_WP
#define S_D3 S_HOLD
#define F_RESET 27
#define F_DONE 17
static inline int isprint(int c)
{
return c > 32 && c < 127;
}
int print_hex_offset(FILE *stream,
const void *block, int count, int offset, uint32_t start)
{
int byte;
const uint8_t *b = block;
count += offset;
b -= offset;
for ( ; offset < count; offset += 16) {
fprintf(stream, "%08x", start + offset);
for (byte = 0; byte < 16; byte++) {
if (byte == 8)
fprintf(stream, " ");
fprintf(stream, " ");
if (offset + byte < count)
fprintf(stream, "%02x", b[offset + byte] & 0xff);
else
fprintf(stream, " ");
}
fprintf(stream, " |");
for (byte = 0; byte < 16 && byte + offset < count; byte++)
fprintf(stream, "%c", isprint(b[offset + byte]) ? b[offset + byte] : '.');
fprintf(stream, "|\r\n");
}
return 0;
}
int print_hex(const void *block, int count, uint32_t start)
{
FILE *stream = stdout;
return print_hex_offset(stream, block, count, 0, start);
}
enum op {
OP_SPI_READ,
OP_SPI_WRITE,
OP_SPI_VERIFY,
OP_SPI_PEEK,
OP_SPI_ID,
OP_FPGA_BOOT,
OP_FPGA_RESET,
OP_UNKNOWN,
};
static int pinspec_to_pinname(char code) {
switch (code) {
case '0': return SP_D0;
case '1': return SP_D1;
case '2': return SP_D2;
case '3': return SP_D3;
case 'o': return SP_MOSI;
case 'i': return SP_MISO;
case 'w': return SP_WP;
case 'h': return SP_HOLD;
case 'k': return SP_CLK;
case 'c': return SP_CS;
case 'r': return FP_RESET;
case 'd': return FP_DONE;
default: return -1;
}
}
static int print_pinspec(FILE *stream) {
fprintf(stream, "Pinspec:\n");
fprintf(stream, " Name Description Default\n");
fprintf(stream, " 0 SPI D0 %d\n", S_D0);
fprintf(stream, " 1 SPI D1 %d\n", S_D1);
fprintf(stream, " 2 SPI D2 %d\n", S_D2);
fprintf(stream, " 3 SPI D3 %d\n", S_D3);
fprintf(stream, " o SPI MOSI %d\n", S_MOSI);
fprintf(stream, " i SPI MISO %d\n", S_MISO);
fprintf(stream, " w SPI WP %d\n", S_WP);
fprintf(stream, " h SPI HOLD %d\n", S_HOLD);
fprintf(stream, " k SPI CLK %d\n", S_CLK);
fprintf(stream, " c SPI CS %d\n", S_CE0);
fprintf(stream, " r FPGA Reset %d\n", F_RESET);
fprintf(stream, " d FPGA Done %d\n", F_DONE);
fprintf(stream, "For example: -g i:23 or -g d:27\n");
return 0;
}
static int print_program_modes(FILE *stream) {
fprintf(stream, " -h This help page\n");
fprintf(stream, " -r Reset the FPGA and have it boot from SPI\n");
fprintf(stream, " -i Print out the SPI ID code\n");
fprintf(stream, " -p offset Peek at 256 bytes of SPI flash at the specified offset\n");
fprintf(stream, " -f bin Load this binary directly into the FPGA\n");
fprintf(stream, " -w bin Write this binary into the SPI flash chip\n");
fprintf(stream, " -v bin Verify the SPI flash contains this data\n");
fprintf(stream, " -s out Save the SPI flash contents to this file\n");
return 0;
}
static int print_help(FILE *stream, const char *progname) {
fprintf(stream, "Fomu Raspberry Pi Flash Utilities\n");
fprintf(stream, "Usage:\n");
fprintf(stream, "%15s (-[hri] | [-p offset] | [-f bin] | [-w bin] | [-v bin] | [-s out])\n", progname);
fprintf(stream, " [-g pinspec] [-t spitype] [-r]\n");
fprintf(stream, "Program mode (pick one):\n");
print_program_modes(stream);
fprintf(stream, "Configuration options:\n");
fprintf(stream, " -g ps Set the pin assignment with the given pinspec\n");
fprintf(stream, " -t type Set the number of bits to use for SPI (1, 2, 4, or Q)\n");
fprintf(stream, "You can remap various pins with -g. The format is [name]:[number].\n");
fprintf(stream, "\n");
fprintf(stream, "The width of SPI can be set with 't [width]'. Valid widths are:\n");
fprintf(stream, " 1 - standard 1-bit spi\n");
fprintf(stream, " 2 - standard 2-bit spi\n");
fprintf(stream, " 4 - standard 4-bit spi (with 1-bit commands)\n");
fprintf(stream, " q - 4-bit qspi (with 4-bit commands)\n");
fprintf(stream, "\n");
print_pinspec(stream);
return 0;
}
static int print_usage_error(FILE *stream) {
fprintf(stream, "Error: You must only specify one program mode:\n");
print_program_modes(stream);
return 1;
}
int main(int argc, char **argv) {
int opt;
int fd;
char *op_filename = NULL;
struct ff_spi *spi;
struct ff_fpga *fpga;
int peek_offset = 0;
enum op op = OP_UNKNOWN;
enum spi_type spi_type = ST_SINGLE;
spi = spiAlloc();
fpga = fpgaAlloc();
spiSetPin(spi, SP_CLK, S_CLK);
spiSetPin(spi, SP_D0, S_D0);
spiSetPin(spi, SP_D1, S_D1);
spiSetPin(spi, SP_D2, S_D2);
spiSetPin(spi, SP_D3, S_D3);
spiSetPin(spi, SP_MISO, S_MISO);
spiSetPin(spi, SP_MOSI, S_MOSI);
spiSetPin(spi, SP_HOLD, S_HOLD);
spiSetPin(spi, SP_WP, S_WP);
spiSetPin(spi, SP_CS, S_CE0);
fpgaSetPin(fpga, FP_RESET, F_RESET);
fpgaSetPin(fpga, FP_DONE, F_DONE);
fpgaSetPin(fpga, FP_CS, S_CE0);
if (gpioInitialise() < 0) {
fprintf(stderr, "Unable to initialize GPIO\n");
return 1;
}
while ((opt = getopt(argc, argv, "hip:rf:w:s:2:3:v:g:t:")) != -1) {
switch (opt) {
case 'r':
if (op != OP_UNKNOWN)
return print_usage_error(stdout);
op = OP_FPGA_RESET;
break;
case 'i':
if (op != OP_UNKNOWN)
return print_usage_error(stdout);
op = OP_SPI_ID;
break;
case 'p':
if (op != OP_UNKNOWN)
return print_usage_error(stdout);
op = OP_SPI_PEEK;
peek_offset = strtoul(optarg, NULL, 0);
break;
case 't':
switch (*optarg) {
case '1':
spi_type = ST_SINGLE;
break;
case '2':
spi_type = ST_DUAL;
break;
case '4':
spi_type = ST_QUAD;
break;
case 'q':
spi_type = ST_QPI;
break;
default:
fprintf(stderr, "Unrecognized SPI speed '%c'. Valid types are: 1, 2, 4, or q\n", *optarg);
return 1;
}
break;
case 'g':
if ((optarg[0] == '\0') || (optarg[1] != ':')) {
fprintf(stderr, "-g requires a pinspec. Usage:\n");
print_pinspec(stderr);
return 1;
}
spiSetPin(spi, pinspec_to_pinname(optarg[0]), strtoul(optarg+2, NULL, 0));
break;
case '2':
spiSetPin(spi, SP_D2, strtoul(optarg, NULL, 0));
break;
case '3':
spiSetPin(spi, SP_D3, strtoul(optarg, NULL, 0));
break;
case 'f':
if (op != OP_UNKNOWN)
return print_usage_error(stdout);
op = OP_FPGA_BOOT;
if (op_filename)
free(op_filename);
op_filename = strdup(optarg);
break;
case 'w':
if (op != OP_UNKNOWN)
return print_usage_error(stdout);
op = OP_SPI_WRITE;
if (op_filename)
free(op_filename);
op_filename = strdup(optarg);
break;
case 'v':
if (op != OP_UNKNOWN)
return print_usage_error(stdout);
op = OP_SPI_VERIFY;
if (op_filename)
free(op_filename);
op_filename = strdup(optarg);
break;
case 's':
if (op != OP_UNKNOWN)
return print_usage_error(stdout);
op = OP_SPI_READ;
if (op_filename)
free(op_filename);
op_filename = strdup(optarg);
break;
default:
print_help(stdout, argv[0]);
return 1;
}
}
if (op == OP_UNKNOWN) {
print_help(stdout, argv[0]);
return 1;
}
spiInit(spi);
fpgaInit(fpga);
spiSetType(spi, spi_type);
fpgaReset(fpga);
switch (op) {
case OP_SPI_ID: {
struct spi_id id = spiId(spi);
printf("Device ID: %02x\n", id.device_id);
if (id.device_id != id.signature)
printf("!! Electronic Signature: %02x\n", id.signature);
printf("Manufacturer ID: %02x\n", id.manufacturer_id);
if (id.manufacturer_id != id._manufacturer_id)
printf("!! JEDEC Manufacturer ID: %02x\n",
id._manufacturer_id);
printf("Memory type: %02x\n", id.memory_type);
printf("Memory size: %02x\n", id.memory_size);
printf("Serial number: %02x %02x %02x %02x\n", id.serial[0], id.serial[1], id.serial[2], id.serial[3]);
printf("SR1: %02x\n", spiReadSr(spi, 1));
printf("SR2: %02x\n", spiReadSr(spi, 2));
printf("SR3: %02x\n", spiReadSr(spi, 3));
break;
}
case OP_SPI_READ: {
fd = open(op_filename, O_WRONLY | O_CREAT | O_TRUNC, 0777);
if (fd == -1) {
perror("unable to open output file");
break;
}
uint8_t *bfr = malloc(16777216);
spiRead(spi, 0, bfr, 16777216);
if (write(fd, bfr, 16777216) != 16777216) {
perror("unable to write SPI flash image");
break;
}
close(fd);
free(bfr);
break;
}
case OP_SPI_WRITE: {
fd = open(op_filename, O_RDONLY);
if (fd == -1) {
perror("unable to open input file");
break;
}
struct stat stat;
if (fstat(fd, &stat) == -1) {
perror("unable to get bitstream file size");
break;
}
uint8_t *bfr = malloc(stat.st_size);
if (!bfr) {
perror("unable to alloc memory for buffer");
break;
}
if (read(fd, bfr, stat.st_size) != stat.st_size) {
perror("unable to read from file");
free(bfr);
break;
}
close(fd);
spiWrite(spi, 0, bfr, stat.st_size);
break;
}
case OP_SPI_VERIFY: {
fd = open(op_filename, O_RDONLY);
if (fd == -1) {
perror("unable to open input file");
break;
}
struct stat stat;
if (fstat(fd, &stat) == -1) {
perror("unable to get bitstream file size");
break;
}
uint8_t *file_src = malloc(stat.st_size);
uint8_t *spi_src = malloc(stat.st_size);
if (!file_src) {
perror("unable to alloc memory for buffer");
break;
}
if (read(fd, file_src, stat.st_size) != stat.st_size) {
perror("unable to read from file");
free(file_src);
break;
}
close(fd);
spiRead(spi, 0, spi_src, stat.st_size);
int offset;
for (offset = 0; offset < stat.st_size; offset++) {
if (file_src[offset] != spi_src[offset])
printf("%9d: file: %02x spi: %02x\n",
offset, file_src[offset], spi_src[offset]);
}
break;
}
case OP_SPI_PEEK: {
uint8_t page[256];
spiRead(spi, peek_offset, page, sizeof(page));
print_hex_offset(stdout, page, sizeof(page), 0, 0);
break;
}
case OP_FPGA_BOOT: {
spiHold(spi);
spiSwapTxRx(spi);
fpgaResetSlave(fpga);
fprintf(stderr, "FPGA Done? %d\n", fpgaDone(fpga));
int fd = open(op_filename, O_RDONLY);
if (fd == -1) {
perror("unable to open fpga bitstream");
break;
}
spiBegin(spi);
uint8_t bfr[32768];
int count;
while ((count = read(fd, bfr, sizeof(bfr))) > 0) {
int i;
for (i = 0; i < count; i++)
spiTx(spi, bfr[i]);
}
if (count < 0) {
perror("unable to read from fpga bitstream file");
break;
}
close(fd);
for (count = 0; count < 500; count++)
spiTx(spi, 0xff);
fprintf(stderr, "FPGA Done? %d\n", fpgaDone(fpga));
spiEnd(spi);
spiSwapTxRx(spi);
spiUnhold(spi);
break;
}
case OP_FPGA_RESET:
printf("resetting fpga\n");
fpgaResetMaster(fpga);
break;
default:
fprintf(stderr, "error: unknown operation\n");
break;
}
fpgaFree(&fpga);
spiFree(&spi);
return 0;
}
Reference in New Issue View Git Blame Copy Permalink