Commit Graph

62 Commits

Author SHA1 Message Date
4fe5f8f629 hardware: sch: use raspberry pi header, rework signaling
Rework the signaling to send everything to a Raspberry Pi header.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-31 10:36:01 +08:00
eb93c70f01 hardware: sch: restructure SPI Flash symbol
It's much cleaner if we put power pins on one side and signal pins on
the other.  This removes the ratsnest that was building up.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-31 10:35:19 +08:00
d99d091d95 pcb: schematic-cache: add Raspberry Pi, new SPI Flash
This reworks the SPI Flash layout and adds the Raspberry Pi header.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-31 10:34:33 +08:00
0973972464 hardware: pcb: add SPI debug header
This will be used to program SPI during board bringup.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 22:28:08 +08:00
78bb283bc6 hardware: sch: populate SPI, /RESET pullups
It turns out these resistors are important.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 19:21:01 +08:00
f06ef4a7d5 hardware: sch: add crystal, VCCPLL regulator
Add a crystal, so we can test to make sure it works.

Also add a second regulator dedicated to VCCPLL in an effort to
cost-down the capacitor and large components that shouldn't be
necessary.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 19:14:33 +08:00
76f7bf2548 pcb: sch: make ICE40 VCCPLL a power input
For some reason, this pin was listed as a `power output`, which does not
appear to be the case.  Due to this error, the DRC would fail when using
a regulator directly connected to the pin.

Mark this pin as a `power input` to fix this, since it's really where
power goes into the chip.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 19:13:32 +08:00
ab18c90450 hardware: sch: specify spinor part
SPINOR parts are largely interchangeable.  Pick one.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 17:09:11 +08:00
c7bfc248af pcb: sch: renumber schematic
Renumber the schematic again, as things have shifted around a bit.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 17:06:04 +08:00
ab33b4a0a1 hardware: rename tomu-fpga to pcb
This more closely reflects what it actually is.

Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 17:05:02 +08:00
3e009d6f8b hardware: pcb: add manufacturer and part numbers
Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 16:57:17 +08:00
bd65526f52 hardware: rename directory from pcb
Signed-off-by: Sean Cross <sean@xobs.io>
2018-10-30 16:08:06 +08:00