simmel-bootloader/softdevice/s140/6.0.0/headers/nrf52/nrf_mbr.h
2018-02-08 13:30:33 +07:00

229 lines
9.6 KiB
C

/*
* Copyright (c) 2014 - 2017, Nordic Semiconductor ASA
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form, except as embedded into a Nordic
* Semiconductor ASA integrated circuit in a product or a software update for
* such product, must reproduce the above copyright notice, this list of
* conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* 4. This software, with or without modification, must only be used with a
* Nordic Semiconductor ASA integrated circuit.
*
* 5. Any software provided in binary form under this license must not be reverse
* engineered, decompiled, modified and/or disassembled.
*
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
@defgroup nrf_mbr_api Master Boot Record API
@{
@brief APIs for updating SoftDevice and BootLoader
*/
#ifndef NRF_MBR_H__
#define NRF_MBR_H__
#include "nrf_svc.h"
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/** @addtogroup NRF_MBR_DEFINES Defines
* @{ */
/**@brief MBR SVC Base number. */
#define MBR_SVC_BASE (0x18)
/**@brief Page size in words. */
#define MBR_PAGE_SIZE_IN_WORDS (1024)
/** @brief The size that must be reserved for the MBR when a SoftDevice is written to flash.
This is the offset where the first byte of the SoftDevice hex file is written.*/
#define MBR_SIZE (0x1000)
/** @} */
/** @addtogroup NRF_MBR_ENUMS Enumerations
* @{ */
/**@brief nRF Master Boot Record API SVC numbers. */
enum NRF_MBR_SVCS
{
SD_MBR_COMMAND = MBR_SVC_BASE, /**< ::sd_mbr_command */
};
/**@brief Possible values for ::sd_mbr_command_t.command */
enum NRF_MBR_COMMANDS
{
SD_MBR_COMMAND_COPY_BL, /**< Copy a new BootLoader. @see sd_mbr_command_copy_bl_t*/
SD_MBR_COMMAND_COPY_SD, /**< Copy a new SoftDevice. @see ::sd_mbr_command_copy_sd_t*/
SD_MBR_COMMAND_INIT_SD, /**< Initialize forwarding interrupts to SD, and run reset function in SD*/
SD_MBR_COMMAND_COMPARE, /**< This command works like memcmp. @see ::sd_mbr_command_compare_t*/
SD_MBR_COMMAND_VECTOR_TABLE_BASE_SET, /**< Change the address the MBR starts after a reset @see ::sd_mbr_command_vector_table_base_set_t*/
SD_MBR_COMMAND_RESERVED,
SD_MBR_COMMAND_IRQ_FORWARD_ADDRESS_SET, /**< Start forwarding all interrupts to this address @see ::sd_mbr_command_irq_forward_address_set_t*/
};
/** @} */
/** @addtogroup NRF_MBR_TYPES Types
* @{ */
/**@brief This command copies part of a new SoftDevice
* The destination area is erased before copying.
* If dst is in the middle of a flash page, that whole flash page will be erased.
* If (dst+len) is in the middle of a flash page, that whole flash page will be erased.
*
* The user of this function is responsible for setting the BPROT registers.
*
* @retval ::NRF_SUCCESS indicates that the contents of the memory blocks where copied correctly.
* @retval ::NRF_ERROR_INTERNAL indicates that the contents of the memory blocks where not verified correctly after copying.
*/
typedef struct
{
uint32_t *src; /**< Pointer to the source of data to be copied.*/
uint32_t *dst; /**< Pointer to the destination where the content is to be copied.*/
uint32_t len; /**< Number of 32 bit words to copy. Must be a multiple of @ref MBR_PAGE_SIZE_IN_WORDS words.*/
} sd_mbr_command_copy_sd_t;
/**@brief This command works like memcmp, but takes the length in words.
*
* @retval ::NRF_SUCCESS indicates that the contents of both memory blocks are equal.
* @retval ::NRF_ERROR_NULL indicates that the contents of the memory blocks are not equal.
*/
typedef struct
{
uint32_t *ptr1; /**< Pointer to block of memory. */
uint32_t *ptr2; /**< Pointer to block of memory. */
uint32_t len; /**< Number of 32 bit words to compare.*/
} sd_mbr_command_compare_t;
/**@brief This command copies a new BootLoader.
* With this command, destination of BootLoader is always the address written in NRF_UICR->BOOTADDR.
*
* Destination is erased by this function.
* If (destination+bl_len) is in the middle of a flash page, that whole flash page will be erased.
*
* This function will use PROTENSET to protect the flash that is not intended to be written.
*
* On success, this function will not return. It will start the new BootLoader from reset-vector as normal.
*
* @retval ::NRF_ERROR_INTERNAL indicates an internal error that should not happen.
* @retval ::NRF_ERROR_FORBIDDEN if NRF_UICR->BOOTADDR is not set.
* @retval ::NRF_ERROR_INVALID_LENGTH if parameters attempts to read or write outside flash area.
* @retval ::NRF_ERROR_NO_MEM if no parameter page is provided (see SoftDevice Specification for more info)
*/
typedef struct
{
uint32_t *bl_src; /**< Pointer to the source of the Bootloader to be be copied.*/
uint32_t bl_len; /**< Number of 32 bit words to copy for BootLoader. */
} sd_mbr_command_copy_bl_t;
/**@brief Change the address the MBR starts after a reset
*
* Once this function has been called, this address is where the MBR will start to forward interrupts to after a reset.
*
* To restore default forwarding this function should be called with @param address set to 0.
* The MBR will then start forwarding to interrupts to the address in NFR_UICR->BOOTADDR or to the SoftDevice if the BOOTADDR is not set.
*
* On success, this function will not return. It will reset the device.
*
* @retval ::NRF_ERROR_INTERNAL indicates an internal error that should not happen.
* @retval ::NRF_ERROR_INVALID_ADDR if parameter address is outside of the flash size.
* @retval ::NRF_ERROR_NO_MEM if no parameter page is provided (see SoftDevice Specification for more info)
*/
typedef struct
{
uint32_t address; /**< The base address of the interrupt vector table for forwarded interrupts.*/
} sd_mbr_command_vector_table_base_set_t;
/**@brief Sets the base address of the interrupt vector table for interrupts forwarded from the MBR
* Unlike sd_mbr_command_vector_table_base_set_t, this function does not reset, and it does not
* change where the MBR starts after reset.
*
* @retval ::NRF_SUCCESS
*/
typedef struct
{
uint32_t address; /**< The base address of the interrupt vector table for forwarded interrupts.*/
} sd_mbr_command_irq_forward_address_set_t;
typedef struct
{
uint32_t command; /**< type of command to be issued see @ref NRF_MBR_COMMANDS. */
union
{
sd_mbr_command_copy_sd_t copy_sd; /**< Parameters for copy SoftDevice.*/
sd_mbr_command_compare_t compare; /**< Parameters for verify.*/
sd_mbr_command_copy_bl_t copy_bl; /**< Parameters for copy BootLoader. Requires parameter page. */
sd_mbr_command_vector_table_base_set_t base_set; /**< Parameters for vector table base set. Requires parameter page.*/
sd_mbr_command_irq_forward_address_set_t irq_forward_address_set; /**< Parameters for irq forward address set*/
} params;
} sd_mbr_command_t;
/** @} */
/** @addtogroup NRF_MBR_FUNCTIONS Functions
* @{ */
/**@brief Issue Master Boot Record commands
*
* Commands used when updating a SoftDevice and bootloader.
*
* The SD_MBR_COMMAND_COPY_BL and SD_MBR_COMMAND_VECTOR_TABLE_BASE_SET requires parameters to be
* retained by the MBR when resetting the IC. This is done in a separate flash page
* provided by the application. The UICR register UICR.NRFFW[1] must be set
* to an address corresponding to a page in the application flash space. This page will be cleared
* by the MBR and used to store the command before reset. When the UICR.NRFFW[1] field is set
* the page it refers to must not be used by the application. If the UICR.NRFFW[1] is set to
* 0xFFFFFFFF (the default) MBR commands which use flash will be unavailable and return
* NRF_ERROR_NO_MEM.
*
* @param[in] param Pointer to a struct describing the command.
*
* @note For return values, see ::sd_mbr_command_copy_sd_t ::sd_mbr_command_copy_bl_t ::sd_mbr_command_compare_t ::sd_mbr_command_vector_table_base_set_t ::sd_mbr_command_irq_forward_address_set_t
*
* @retval NRF_ERROR_NO_MEM if UICR.NRFFW[1] is not set (i.e. is 0xFFFFFFFF).
* @retval NRF_ERROR_INVALID_PARAM if an invalid command is given.
*/
SVCALL(SD_MBR_COMMAND, uint32_t, sd_mbr_command(sd_mbr_command_t* param));
/** @} */
#ifdef __cplusplus
}
#endif
#endif // NRF_MBR_H__
/**
@}
*/