simmel-bootloader/softdevice/6.0.0/s140/headers/ble_l2cap.h
2018-04-02 14:59:19 +07:00

507 lines
26 KiB
C

/*
* Copyright (c) 2011 - 2017, Nordic Semiconductor ASA
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form, except as embedded into a Nordic
* Semiconductor ASA integrated circuit in a product or a software update for
* such product, must reproduce the above copyright notice, this list of
* conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* 4. This software, with or without modification, must only be used with a
* Nordic Semiconductor ASA integrated circuit.
*
* 5. Any software provided in binary form under this license must not be reverse
* engineered, decompiled, modified and/or disassembled.
*
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
@addtogroup BLE_L2CAP Logical Link Control and Adaptation Protocol (L2CAP)
@{
@brief Definitions and prototypes for the L2CAP interface.
*/
#ifndef BLE_L2CAP_H__
#define BLE_L2CAP_H__
#include <stdint.h>
#include "nrf_svc.h"
#include "nrf_error.h"
#include "ble_ranges.h"
#include "ble_types.h"
#include "ble_err.h"
#ifdef __cplusplus
extern "C" {
#endif
/**@addtogroup BLE_L2CAP_TERMINOLOGY Terminology
* @{
* @details
*
* L2CAP SDU
* - A data unit that the application can send/receive to/from a peer.
*
* L2CAP PDU
* - A data unit that is exchanged between local and remote L2CAP entities.
* It consists of L2CAP protocol control information and payload fields.
* The payload field can contain an L2CAP SDU or a part of an L2CAP SDU.
*
* L2CAP MTU
* - The maximum length of an L2CAP SDU.
*
* L2CAP MPS
* - The maximum length of an L2CAP PDU payload field.
*
* Credits
* - A value indicating the number of L2CAP PDUs that the receiver of the credit can send to the peer.
* @} */
/**@addtogroup BLE_L2CAP_ENUMERATIONS Enumerations
* @{ */
/**@brief L2CAP API SVC numbers. */
enum BLE_L2CAP_SVCS
{
SD_BLE_L2CAP_CH_SETUP = BLE_L2CAP_SVC_BASE + 0, /**< Set up an L2CAP channel. */
SD_BLE_L2CAP_CH_RELEASE = BLE_L2CAP_SVC_BASE + 1, /**< Release an L2CAP channel. */
SD_BLE_L2CAP_CH_RX = BLE_L2CAP_SVC_BASE + 2, /**< Receive an SDU on an L2CAP channel. */
SD_BLE_L2CAP_CH_TX = BLE_L2CAP_SVC_BASE + 3, /**< Transmit an SDU on an L2CAP channel. */
SD_BLE_L2CAP_CH_FLOW_CONTROL = BLE_L2CAP_SVC_BASE + 4, /**< Advanced SDU reception flow control. */
};
/**@brief L2CAP Event IDs. */
enum BLE_L2CAP_EVTS
{
BLE_L2CAP_EVT_CH_SETUP_REQUEST = BLE_L2CAP_EVT_BASE + 0, /**< L2CAP Channel Setup Request event.
\n See @ref ble_l2cap_evt_ch_setup_request_t. */
BLE_L2CAP_EVT_CH_SETUP_REFUSED = BLE_L2CAP_EVT_BASE + 1, /**< L2CAP Channel Setup Refused event.
\n See @ref ble_l2cap_evt_ch_setup_refused_t. */
BLE_L2CAP_EVT_CH_SETUP = BLE_L2CAP_EVT_BASE + 2, /**< L2CAP Channel Setup Completed event.
\n See @ref ble_l2cap_evt_ch_setup_t. */
BLE_L2CAP_EVT_CH_RELEASED = BLE_L2CAP_EVT_BASE + 3, /**< L2CAP Channel Released event.
\n No additional event structure applies. */
BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED = BLE_L2CAP_EVT_BASE + 4, /**< L2CAP Channel SDU data buffer released event.
\n See @ref ble_l2cap_evt_ch_sdu_buf_released_t. */
BLE_L2CAP_EVT_CH_CREDIT = BLE_L2CAP_EVT_BASE + 5, /**< L2CAP Channel Credit received.
\n See @ref ble_l2cap_evt_ch_credit_t. */
BLE_L2CAP_EVT_CH_RX = BLE_L2CAP_EVT_BASE + 6, /**< L2CAP Channel SDU received.
\n See @ref ble_l2cap_evt_ch_rx_t. */
BLE_L2CAP_EVT_CH_TX = BLE_L2CAP_EVT_BASE + 7, /**< L2CAP Channel SDU transmitted.
\n See @ref ble_l2cap_evt_ch_tx_t. */
};
/** @} */
/**@addtogroup BLE_L2CAP_DEFINES Defines
* @{ */
/**@brief Maximum number of L2CAP channels per connection. */
#define BLE_L2CAP_CH_COUNT_MAX (64)
/**@brief Minimum L2CAP MTU, in bytes. */
#define BLE_L2CAP_MTU_MIN (23)
/**@brief Minimum L2CAP MPS, in bytes. */
#define BLE_L2CAP_MPS_MIN (23)
/**@brief Invalid CID. */
#define BLE_L2CAP_CID_INVALID (0x0000)
/**@brief Default number of credits for @ref sd_ble_l2cap_ch_flow_control. */
#define BLE_L2CAP_CREDITS_DEFAULT (1)
/**@defgroup BLE_L2CAP_CH_SETUP_REFUSED_SRCS L2CAP channel setup refused sources
* @{ */
#define BLE_L2CAP_CH_SETUP_REFUSED_SRC_LOCAL (0x01) /**< Local. */
#define BLE_L2CAP_CH_SETUP_REFUSED_SRC_REMOTE (0x02) /**< Remote. */
/** @} */
/** @defgroup BLE_L2CAP_CH_STATUS_CODES L2CAP channel status codes
* @{ */
#define BLE_L2CAP_CH_STATUS_CODE_SUCCESS (0x0000) /**< Success. */
#define BLE_L2CAP_CH_STATUS_CODE_LE_PSM_NOT_SUPPORTED (0x0002) /**< LE_PSM not supported. */
#define BLE_L2CAP_CH_STATUS_CODE_NO_RESOURCES (0x0004) /**< No resources available. */
#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_AUTHENTICATION (0x0005) /**< Insufficient authentication. */
#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_AUTHORIZATION (0x0006) /**< Insufficient authorization. */
#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_ENC_KEY_SIZE (0x0007) /**< Insufficient encryption key size. */
#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_ENC (0x0008) /**< Insufficient encryption. */
#define BLE_L2CAP_CH_STATUS_CODE_INVALID_SCID (0x0009) /**< Invalid Source CID. */
#define BLE_L2CAP_CH_STATUS_CODE_SCID_ALLOCATED (0x000A) /**< Source CID already allocated. */
#define BLE_L2CAP_CH_STATUS_CODE_UNACCEPTABLE_PARAMS (0x000B) /**< Unacceptable parameters. */
#define BLE_L2CAP_CH_STATUS_CODE_NOT_UNDERSTOOD (0x8000) /**< Command Reject received instead of LE Credit Based Connection Response. */
#define BLE_L2CAP_CH_STATUS_CODE_TIMEOUT (0xC000) /**< Operation timed out. */
/** @} */
/** @} */
/**@addtogroup BLE_L2CAP_STRUCTURES Structures
* @{ */
/**
* @brief BLE L2CAP connection configuration parameters, set with @ref sd_ble_cfg_set.
*
* @note These parameters are set per connection, so all L2CAP channels created on this connection
* will have the same parameters.
*
* @retval ::NRF_ERROR_INVALID_PARAM One or more of the following is true:
* - rx_mps is smaller than @ref BLE_L2CAP_MPS_MIN.
* - tx_mps is smaller than @ref BLE_L2CAP_MPS_MIN.
* - ch_count is greater than @ref BLE_L2CAP_CH_COUNT_MAX.
* @retval ::NRF_ERROR_NO_MEM rx_mps or tx_mps is set too high.
*/
typedef struct
{
uint16_t rx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP shall
be able to receive on L2CAP channels on connections with this
configuration. The minimum value is @ref BLE_L2CAP_MPS_MIN. */
uint16_t tx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP shall
be able to transmit on L2CAP channels on connections with this
configuration. The minimum value is @ref BLE_L2CAP_MPS_MIN. */
uint8_t rx_queue_size; /**< Number of SDU data buffers that can be queued for reception per
L2CAP channel. The minimum value is one. */
uint8_t tx_queue_size; /**< Number of SDU data buffers that can be queued for transmission
per L2CAP channel. The minimum value is one. */
uint8_t ch_count; /**< Number of L2CAP channels the application can create per connection
with this configuration. The default value is zero, the maximum
value is @ref BLE_L2CAP_CH_COUNT_MAX.
@note if this parameter is set to zero, all other parameters in
@ref ble_l2cap_conn_cfg_t are ignored. */
} ble_l2cap_conn_cfg_t;
/**@brief L2CAP channel RX parameters. */
typedef struct
{
uint16_t rx_mtu; /**< The maximum L2CAP SDU size, in bytes, that L2CAP shall be able to
receive on this L2CAP channel.
- Must be equal to or greater than @ref BLE_L2CAP_MTU_MIN. */
uint16_t rx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP shall be
able to receive on this L2CAP channel.
- Must be equal to or greater than @ref BLE_L2CAP_MPS_MIN.
- Must be equal to or less than @ref ble_l2cap_conn_cfg_t::rx_mps. */
ble_data_t sdu_buf; /**< SDU data buffer for reception.
- If @ref ble_data_t::p_data is non-NULL, initial credits are
issued to the peer.
- If @ref ble_data_t::p_data is NULL, no initial credits are
issued to the peer. */
} ble_l2cap_ch_rx_params_t;
/**@brief L2CAP channel setup parameters. */
typedef struct
{
ble_l2cap_ch_rx_params_t rx_params; /**< L2CAP channel RX parameters. */
uint16_t le_psm; /**< LE Protocol/Service Multiplexer. Used when requesting
setup of an L2CAP channel, ignored otherwise. */
uint16_t status; /**< Status code, see @ref BLE_L2CAP_CH_STATUS_CODES.
Used when replying to a setup request of an L2CAP
channel, ignored otherwise. */
} ble_l2cap_ch_setup_params_t;
/**@brief L2CAP channel TX parameters. */
typedef struct
{
uint16_t tx_mtu; /**< The maximum L2CAP SDU size, in bytes, that L2CAP is able to
transmit on this L2CAP channel. */
uint16_t peer_mps; /**< The maximum L2CAP PDU payload size, in bytes, that the peer is
able to receive on this L2CAP channel. */
uint16_t tx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP is able
to transmit on this L2CAP channel. This is effective tx_mps,
selected by the SoftDevice as
MIN( @ref ble_l2cap_ch_tx_params_t::peer_mps, @ref ble_l2cap_conn_cfg_t::tx_mps ) */
uint16_t credits; /**< Initial credits given by the peer. */
} ble_l2cap_ch_tx_params_t;
/**@brief L2CAP Channel Setup Request event. */
typedef struct
{
ble_l2cap_ch_tx_params_t tx_params; /**< L2CAP channel TX parameters. */
uint16_t le_psm; /**< LE Protocol/Service Multiplexer. */
} ble_l2cap_evt_ch_setup_request_t;
/**@brief L2CAP Channel Setup Refused event. */
typedef struct
{
uint8_t source; /**< Source, see @ref BLE_L2CAP_CH_SETUP_REFUSED_SRCS */
uint16_t status; /**< Status code, see @ref BLE_L2CAP_CH_STATUS_CODES */
} ble_l2cap_evt_ch_setup_refused_t;
/**@brief L2CAP Channel Setup Completed event. */
typedef struct
{
ble_l2cap_ch_tx_params_t tx_params; /**< L2CAP channel TX parameters. */
} ble_l2cap_evt_ch_setup_t;
/**@brief L2CAP Channel SDU Data Duffer Released event. */
typedef struct
{
ble_data_t sdu_buf; /**< Returned reception or transmission SDU data buffer. The SoftDevice
returns SDU data buffers supplied by the application, which have
not yet been returned previously via a @ref BLE_L2CAP_EVT_CH_RX or
@ref BLE_L2CAP_EVT_CH_TX event. */
} ble_l2cap_evt_ch_sdu_buf_released_t;
/**@brief L2CAP Channel Credit received event. */
typedef struct
{
uint16_t credits; /**< Additional credits given by the peer. */
} ble_l2cap_evt_ch_credit_t;
/**@brief L2CAP Channel received SDU event. */
typedef struct
{
uint16_t sdu_len; /**< Total SDU length, in bytes. */
ble_data_t sdu_buf; /**< SDU data buffer.
@note If there is not enough space in the buffer
(sdu_buf.len < sdu_len) then the rest of the SDU will be
silently discarded by the SoftDevice. */
} ble_l2cap_evt_ch_rx_t;
/**@brief L2CAP Channel transmitted SDU event. */
typedef struct
{
ble_data_t sdu_buf; /**< SDU data buffer. */
} ble_l2cap_evt_ch_tx_t;
/**@brief L2CAP event structure. */
typedef struct
{
uint16_t conn_handle; /**< Connection Handle on which the event occured. */
uint16_t local_cid; /**< Local Channel ID of the L2CAP channel, or
@ref BLE_L2CAP_CID_INVALID if not present. */
union
{
ble_l2cap_evt_ch_setup_request_t ch_setup_request; /**< L2CAP Channel Setup Request Event Parameters. */
ble_l2cap_evt_ch_setup_refused_t ch_setup_refused; /**< L2CAP Channel Setup Refused Event Parameters. */
ble_l2cap_evt_ch_setup_t ch_setup; /**< L2CAP Channel Setup Completed Event Parameters. */
ble_l2cap_evt_ch_sdu_buf_released_t ch_sdu_buf_released;/**< L2CAP Channel SDU Data Buffer Released Event Parameters. */
ble_l2cap_evt_ch_credit_t credit; /**< L2CAP Channel Credit Received Event Parameters. */
ble_l2cap_evt_ch_rx_t rx; /**< L2CAP Channel SDU Received Event Parameters. */
ble_l2cap_evt_ch_tx_t tx; /**< L2CAP Channel SDU Transmitted Event Parameters. */
} params; /**< Event Parameters. */
} ble_l2cap_evt_t;
/** @} */
/**@addtogroup BLE_L2CAP_FUNCTIONS Functions
* @{ */
/**@brief Set up an L2CAP channel.
*
* @details This function is used to:
* - Request setup of an L2CAP channel: sends an LE Credit Based Connection Request packet to a peer.
* - Reply to a setup request of an L2CAP channel (if called in response to a
* @ref BLE_L2CAP_EVT_CH_SETUP_REQUEST event): sends an LE Credit Based Connection
* Response packet to a peer.
*
* @note A call to this function will require the application to keep the SDU data buffer alive
* until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_RX or
* @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event.
*
* @events
* @event{@ref BLE_L2CAP_EVT_CH_SETUP, Setup successful.}
* @event{@ref BLE_L2CAP_EVT_CH_SETUP_REFUSED, Setup failed.}
* @endevents
*
* @mscs
* @mmsc{@ref BLE_L2CAP_CH_SETUP_MSC}
* @endmscs
*
* @param[in] conn_handle Connection Handle.
* @param[in,out] p_local_cid Pointer to a uint16_t containing Local Channel ID of the L2CAP channel:
* - As input: @ref BLE_L2CAP_CID_INVALID when requesting setup of an L2CAP
* channel or local_cid provided in the @ref BLE_L2CAP_EVT_CH_SETUP_REQUEST
* event when replying to a setup request of an L2CAP channel.
* - As output: local_cid for this channel.
* @param[in] p_params L2CAP channel parameters.
*
* @retval ::NRF_SUCCESS Successfully queued request or response for transmission.
* @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry.
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
* @retval ::NRF_ERROR_INVALID_LENGTH Supplied higher rx_mps than has been configured on this link.
* @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (L2CAP channel already set up).
* @retval ::NRF_ERROR_NOT_FOUND CID not found.
* @retval ::NRF_ERROR_RESOURCES The limit has been reached for available L2CAP channels,
* see @ref ble_l2cap_conn_cfg_t::ch_count.
*/
SVCALL(SD_BLE_L2CAP_CH_SETUP, uint32_t, sd_ble_l2cap_ch_setup(uint16_t conn_handle, uint16_t *p_local_cid, ble_l2cap_ch_setup_params_t const *p_params));
/**@brief Release an L2CAP channel.
*
* @details This sends a Disconnection Request packet to a peer.
*
* @events
* @event{@ref BLE_L2CAP_EVT_CH_RELEASED, Release complete.}
* @endevents
*
* @mscs
* @mmsc{@ref BLE_L2CAP_CH_RELEASE_MSC}
* @endmscs
*
* @param[in] conn_handle Connection Handle.
* @param[in] local_cid Local Channel ID of the L2CAP channel.
*
* @retval ::NRF_SUCCESS Successfully queued request for transmission.
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
* @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is
* in progress for the L2CAP channel).
* @retval ::NRF_ERROR_NOT_FOUND CID not found.
*/
SVCALL(SD_BLE_L2CAP_CH_RELEASE, uint32_t, sd_ble_l2cap_ch_release(uint16_t conn_handle, uint16_t local_cid));
/**@brief Receive an SDU on an L2CAP channel.
*
* @details This may issue additional credits to the peer using an LE Flow Control Credit packet.
*
* @note A call to this function will require the application to keep the memory pointed by
* @ref ble_data_t::p_data alive until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_RX
* or @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event.
*
* @note The SoftDevice can queue up to @ref ble_l2cap_conn_cfg_t::rx_queue_size SDU data buffers
* for reception per L2CAP channel.
*
* @events
* @event{@ref BLE_L2CAP_EVT_CH_RX, The SDU is received.}
* @endevents
*
* @mscs
* @mmsc{@ref BLE_L2CAP_CH_RX_MSC}
* @endmscs
*
* @param[in] conn_handle Connection Handle.
* @param[in] local_cid Local Channel ID of the L2CAP channel.
* @param[in] p_sdu_buf Pointer to the SDU data buffer.
*
* @retval ::NRF_SUCCESS Buffer accepted.
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
* @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is
* in progress for an L2CAP channel).
* @retval ::NRF_ERROR_NOT_FOUND CID not found.
* @retval ::NRF_ERROR_RESOURCES Too many SDU data buffers supplied. Wait for a
* @ref BLE_L2CAP_EVT_CH_RX event and retry.
*/
SVCALL(SD_BLE_L2CAP_CH_RX, uint32_t, sd_ble_l2cap_ch_rx(uint16_t conn_handle, uint16_t local_cid, ble_data_t const *p_sdu_buf));
/**@brief Transmit an SDU on an L2CAP channel.
*
* @note A call to this function will require the application to keep the memory pointed by
* @ref ble_data_t::p_data alive until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_TX
* or @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event.
*
* @note The SoftDevice can queue up to @ref ble_l2cap_conn_cfg_t::tx_queue_size SDUs for
* transmission per L2CAP channel.
*
* @note The application can keep track of the available credits for transmission by following
* the procedure below:
* - Store initial credits given by the peer in a variable.
* (Initial credits are provided in a @ref BLE_L2CAP_EVT_CH_SETUP event.)
* - Decrement the variable, which stores the currently available credits, by
* ceiling((@ref ble_data_t::len + 2) / tx_mps) when a call to this function returns
* @ref NRF_SUCCESS. (tx_mps is provided in a @ref BLE_L2CAP_EVT_CH_SETUP event.)
* - Increment the variable, which stores the currently available credits, by additional
* credits given by the peer in a @ref BLE_L2CAP_EVT_CH_CREDIT event.
*
* @events
* @event{@ref BLE_L2CAP_EVT_CH_TX, The SDU is transmitted.}
* @endevents
*
* @mscs
* @mmsc{@ref BLE_L2CAP_CH_TX_MSC}
* @endmscs
*
* @param[in] conn_handle Connection Handle.
* @param[in] local_cid Local Channel ID of the L2CAP channel.
* @param[in] p_sdu_buf Pointer to the SDU data buffer.
*
* @retval ::NRF_SUCCESS Successfully queued L2CAP SDU for transmission.
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
* @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is
* in progress for the L2CAP channel).
* @retval ::NRF_ERROR_NOT_FOUND CID not found.
* @retval ::NRF_ERROR_DATA_SIZE Invalid SDU length supplied, must not be more than
* @ref ble_l2cap_ch_tx_params_t::tx_mtu provided in
* @ref BLE_L2CAP_EVT_CH_SETUP event.
* @retval ::NRF_ERROR_RESOURCES Too many SDUs queued for transmission. Wait for a
* @ref BLE_L2CAP_EVT_CH_TX event and retry.
*/
SVCALL(SD_BLE_L2CAP_CH_TX, uint32_t, sd_ble_l2cap_ch_tx(uint16_t conn_handle, uint16_t local_cid, ble_data_t const *p_sdu_buf));
/**@brief Advanced SDU reception flow control.
*
* @details Adjust the way the SoftDevice issues credits to the peer.
* This may issue additional credits to the peer using an LE Flow Control Credit packet.
*
* @mscs
* @mmsc{@ref BLE_L2CAP_CH_FLOW_CONTROL_MSC}
* @endmscs
*
* @param[in] conn_handle Connection Handle.
* @param[in] local_cid Local Channel ID of the L2CAP channel or @ref BLE_L2CAP_CID_INVALID to set
* the value that will be used for newly created channels.
* @param[in] credits Number of credits that the SoftDevice will make sure the peer has every
* time it starts using a new reception buffer.
* - @ref BLE_L2CAP_CREDITS_DEFAULT is the default value the SoftDevice will
* use if this function is not called.
* - If set to zero, the SoftDevice will stop issuing credits for new reception
* buffers the application provides or has provided. SDU reception that is
* currently ongoing will be allowed to complete.
* @param[out] p_credits NULL or pointer to a uint16_t. If a valid pointer is provided, it will be
* written by the SoftDevice with the number of credits that is or will be
* available to the peer. If the value written by the SoftDevice is 0 when
* credits parameter was set to 0, the peer will not be able to send more
* data until more credits are provided by calling this function again with
* credits > 0. This parameter is ignored when local_cid is set to
* @ref BLE_L2CAP_CID_INVALID.
*
* @note Application should take care when setting number of credits higher than default value. In
* this case the application must make sure that the SoftDevice always has reception buffers
* available (see @ref sd_ble_l2cap_ch_rx) for that channel. If the SoftDevice does not have
* such buffers available, packets may be NACKed on the Link Layer and all Bluetooth traffic
* on the connection handle may be stalled until the SoftDevice again has an available
* reception buffer. This applies even if the application has used this call to set the
* credits back to default, or zero.
*
* @retval ::NRF_SUCCESS Flow control parameters accepted.
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
* @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is
* in progress for an L2CAP channel).
* @retval ::NRF_ERROR_NOT_FOUND CID not found.
*/
SVCALL(SD_BLE_L2CAP_CH_FLOW_CONTROL, uint32_t, sd_ble_l2cap_ch_flow_control(uint16_t conn_handle, uint16_t local_cid, uint16_t credits, uint16_t *p_credits));
/** @} */
#ifdef __cplusplus
}
#endif
#endif // BLE_L2CAP_H__
/**
@}
*/