/** * Copyright (c) 2013 - 2017, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /**@file * * @defgroup app_uart UART module * @{ * @ingroup app_common * * @brief UART module interface. */ #ifndef APP_UART_H__ #define APP_UART_H__ #include #include #include "app_util_platform.h" #ifdef __cplusplus extern "C" { #endif #define UART_PIN_DISCONNECTED 0xFFFFFFFF /**< Value indicating that no pin is connected to this UART register. */ /**@brief UART Flow Control modes for the peripheral. */ typedef enum { APP_UART_FLOW_CONTROL_DISABLED, /**< UART Hw Flow Control is disabled. */ APP_UART_FLOW_CONTROL_ENABLED, /**< Standard UART Hw Flow Control is enabled. */ } app_uart_flow_control_t; /**@brief UART communication structure holding configuration settings for the peripheral. */ typedef struct { uint32_t rx_pin_no; /**< RX pin number. */ uint32_t tx_pin_no; /**< TX pin number. */ uint32_t rts_pin_no; /**< RTS pin number, only used if flow control is enabled. */ uint32_t cts_pin_no; /**< CTS pin number, only used if flow control is enabled. */ app_uart_flow_control_t flow_control; /**< Flow control setting, if flow control is used, the system will use low power UART mode, based on CTS signal. */ bool use_parity; /**< Even parity if TRUE, no parity if FALSE. */ uint32_t baud_rate; /**< Baud rate configuration. */ } app_uart_comm_params_t; /**@brief UART buffer for transmitting/receiving data. */ typedef struct { uint8_t * rx_buf; /**< Pointer to the RX buffer. */ uint32_t rx_buf_size; /**< Size of the RX buffer. */ uint8_t * tx_buf; /**< Pointer to the TX buffer. */ uint32_t tx_buf_size; /**< Size of the TX buffer. */ } app_uart_buffers_t; /**@brief Enumeration which defines events used by the UART module upon data reception or error. * * @details The event type is used to indicate the type of additional information in the event * @ref app_uart_evt_t. */ typedef enum { APP_UART_DATA_READY, /**< An event indicating that UART data has been received. The data is available in the FIFO and can be fetched using @ref app_uart_get. */ APP_UART_FIFO_ERROR, /**< An error in the FIFO module used by the app_uart module has occured. The FIFO error code is stored in app_uart_evt_t.data.error_code field. */ APP_UART_COMMUNICATION_ERROR, /**< An communication error has occured during reception. The error is stored in app_uart_evt_t.data.error_communication field. */ APP_UART_TX_EMPTY, /**< An event indicating that UART has completed transmission of all available data in the TX FIFO. */ APP_UART_DATA, /**< An event indicating that UART data has been received, and data is present in data field. This event is only used when no FIFO is configured. */ } app_uart_evt_type_t; /**@brief Struct containing events from the UART module. * * @details The app_uart_evt_t is used to notify the application of asynchronous events when data * are received on the UART peripheral or in case an error occured during data reception. */ typedef struct { app_uart_evt_type_t evt_type; /**< Type of event. */ union { uint32_t error_communication; /**< Field used if evt_type is: APP_UART_COMMUNICATION_ERROR. This field contains the value in the ERRORSRC register for the UART peripheral. The UART_ERRORSRC_x defines from nrf5x_bitfields.h can be used to parse the error code. See also the \nRFXX Series Reference Manual for specification. */ uint32_t error_code; /**< Field used if evt_type is: NRF_ERROR_x. Additional status/error code if the error event type is APP_UART_FIFO_ERROR. This error code refer to errors defined in nrf_error.h. */ uint8_t value; /**< Field used if evt_type is: NRF_ERROR_x. Additional status/error code if the error event type is APP_UART_FIFO_ERROR. This error code refer to errors defined in nrf_error.h. */ } data; } app_uart_evt_t; /**@brief Function for handling app_uart event callback. * * @details Upon an event in the app_uart module this callback function will be called to notify * the application about the event. * * @param[in] p_app_uart_event Pointer to UART event. */ typedef void (* app_uart_event_handler_t) (app_uart_evt_t * p_app_uart_event); /**@brief Macro for safe initialization of the UART module in a single user instance when using * a FIFO together with UART. * * @param[in] P_COMM_PARAMS Pointer to a UART communication structure: app_uart_comm_params_t * @param[in] RX_BUF_SIZE Size of desired RX buffer, must be a power of 2 or ZERO (No FIFO). * @param[in] TX_BUF_SIZE Size of desired TX buffer, must be a power of 2 or ZERO (No FIFO). * @param[in] EVT_HANDLER Event handler function to be called when an event occurs in the * UART module. * @param[in] IRQ_PRIO IRQ priority, app_irq_priority_t, for the UART module irq handler. * @param[out] ERR_CODE The return value of the UART initialization function will be * written to this parameter. * * @note Since this macro allocates a buffer and registers the module as a GPIOTE user when flow * control is enabled, it must only be called once. */ #define APP_UART_FIFO_INIT(P_COMM_PARAMS, RX_BUF_SIZE, TX_BUF_SIZE, EVT_HANDLER, IRQ_PRIO, ERR_CODE) \ do \ { \ app_uart_buffers_t buffers; \ static uint8_t rx_buf[RX_BUF_SIZE]; \ static uint8_t tx_buf[TX_BUF_SIZE]; \ \ buffers.rx_buf = rx_buf; \ buffers.rx_buf_size = sizeof (rx_buf); \ buffers.tx_buf = tx_buf; \ buffers.tx_buf_size = sizeof (tx_buf); \ ERR_CODE = app_uart_init(P_COMM_PARAMS, &buffers, EVT_HANDLER, IRQ_PRIO); \ } while (0) /**@brief Macro for safe initialization of the UART module in a single user instance. * * @param[in] P_COMM_PARAMS Pointer to a UART communication structure: app_uart_comm_params_t * @param[in] EVT_HANDLER Event handler function to be called when an event occurs in the * UART module. * @param[in] IRQ_PRIO IRQ priority, app_irq_priority_t, for the UART module irq handler. * @param[out] ERR_CODE The return value of the UART initialization function will be * written to this parameter. * * @note Since this macro allocates registers the module as a GPIOTE user when flow control is * enabled, it must only be called once. */ #define APP_UART_INIT(P_COMM_PARAMS, EVT_HANDLER, IRQ_PRIO, ERR_CODE) \ do \ { \ ERR_CODE = app_uart_init(P_COMM_PARAMS, NULL, EVT_HANDLER, IRQ_PRIO); \ } while (0) /**@brief Function for initializing the UART module. Use this initialization when several instances of the UART * module are needed. * * * @note Normally single initialization should be done using the APP_UART_INIT() or * APP_UART_INIT_FIFO() macro depending on whether the FIFO should be used by the UART, as * that will allocate the buffers needed by the UART module (including aligning the buffer * correctly). * @param[in] p_comm_params Pin and communication parameters. * @param[in] p_buffers RX and TX buffers, NULL is FIFO is not used. * @param[in] error_handler Function to be called in case of an error. * @param[in] irq_priority Interrupt priority level. * * @retval NRF_SUCCESS If successful initialization. * @retval NRF_ERROR_INVALID_LENGTH If a provided buffer is not a power of two. * @retval NRF_ERROR_NULL If one of the provided buffers is a NULL pointer. * * The below errors are propagated by the UART module to the caller upon registration when Hardware * Flow Control is enabled. When Hardware Flow Control is not used, these errors cannot occur. * @retval NRF_ERROR_INVALID_STATE The GPIOTE module is not in a valid state when registering * the UART module as a user. * @retval NRF_ERROR_INVALID_PARAM The UART module provides an invalid callback function when * registering the UART module as a user. * Or the value pointed to by *p_uart_uid is not a valid * GPIOTE number. * @retval NRF_ERROR_NO_MEM GPIOTE module has reached the maximum number of users. */ uint32_t app_uart_init(const app_uart_comm_params_t * p_comm_params, app_uart_buffers_t * p_buffers, app_uart_event_handler_t error_handler, app_irq_priority_t irq_priority); /**@brief Function for getting a byte from the UART. * * @details This function will get the next byte from the RX buffer. If the RX buffer is empty * an error code will be returned and the app_uart module will generate an event upon * reception of the first byte which is added to the RX buffer. * * @param[out] p_byte Pointer to an address where next byte received on the UART will be copied. * * @retval NRF_SUCCESS If a byte has been received and pushed to the pointer provided. * @retval NRF_ERROR_NOT_FOUND If no byte is available in the RX buffer of the app_uart module. */ uint32_t app_uart_get(uint8_t * p_byte); /**@brief Function for putting a byte on the UART. * * @details This call is non-blocking. * * @param[in] byte Byte to be transmitted on the UART. * * @retval NRF_SUCCESS If the byte was successfully put on the TX buffer for transmission. * @retval NRF_ERROR_NO_MEM If no more space is available in the TX buffer. * NRF_ERROR_NO_MEM may occur if flow control is enabled and CTS signal * is high for a long period and the buffer fills up. * @retval NRF_ERROR_INTERNAL If UART driver reported error. */ uint32_t app_uart_put(uint8_t byte); /**@brief Function for flushing the RX and TX buffers (Only valid if FIFO is used). * This function does nothing if FIFO is not used. * * @retval NRF_SUCCESS Flushing completed (Current implementation will always succeed). */ uint32_t app_uart_flush(void); /**@brief Function for closing the UART module. * * @retval NRF_SUCCESS If successfully closed. * @retval NRF_ERROR_INVALID_PARAM If an invalid user id is provided or the user id differs from * the current active user. */ uint32_t app_uart_close(void); #ifdef __cplusplus } #endif #endif //APP_UART_H__ /** @} */