Commit Graph

273 Commits

Author SHA1 Message Date
Henry Gabryjelski
12bb62eadd Per request, keep hard drive type in boot block.
Update the .PhysicalDrive in boot block.
Update the first fat entries to match MediaDescriptor of boot block.
2019-03-12 12:09:49 -07:00
Henry Gabryjelski
e2afc36dae
Fix media type mismatch
Fix the boot sector media descriptor to match the first FAT entries.
2019-03-10 20:02:56 -07:00
Gregory P. Smith
01492634b6 Use RGB red and blue as primary and secondary.
The code currently expects a primary LED no matter what so the
RGB led support combined with that clobbers the nice pulsing primary.
2019-03-03 21:12:30 -08:00
Gregory P. Smith
05726e2575 Initial MakerDiary MDK nrf52840 USB dongle support.
Many TODOs to address but it builds and appears at first glance to work...
2019-03-03 18:58:34 -08:00
hathach
57aa554430 update tinyusb to latest for scsi write10 complete fix 2019-02-22 14:46:16 +07:00
hathach
9ed3f5ea32 fix #46 complete uf2 writing using tud_msc_write10_complete_cb 2019-02-22 00:21:34 +07:00
hathach
d9b275c321
increase buffer depth to fix OTA issue with nrfConnect on iOS
- also add optional debug helper
- increase led conn cycle when ble connected for easier recognition
2019-02-15 12:12:11 +07:00
hathach
981a6976e2 change HCI_RX_BUF_QUEUE_SIZE back to 4 2019-01-31 22:50:42 +07:00
hathach
7ec0ff51f0
Merge pull request #40 from se7ensong/OTA_fix
Fix OTA using nRF toolbox on iPhone (tested on SE and XS)
2019-01-31 22:35:12 +07:00
hathach
3737d4bc12 update segger project, cleanup 2019-01-31 21:39:02 +07:00
hathach
7279bd9b32 added metro nrf52840 revA
clean up makefile
2019-01-31 18:01:41 +07:00
hathach
2f1eec7118
fix #41 use RXD,TXD in board header 2019-01-14 12:50:20 +07:00
hathach
3611a0579e
minor clean up for pca10059 2019-01-11 11:36:42 +07:00
Song Luan
04f05dac64 Fix OTA using nRF toolbox on iPhone (tested on SE and XS) 2019-01-10 13:09:24 +00:00
hathach
95cbe3b129
fix PWM psel[1] is not reset to 0xffffffff when teardown
also move neopixel to pwm1
2019-01-10 15:55:03 +07:00
hathach
9ece5f64a9
clean up makefile 2019-01-04 07:00:45 +07:00
hathach
a316c8bd67 reduce delay to 50us 2018-12-21 15:04:48 +07:00
hathach
25f6d395bc fix neopixel didn't turn off after dfu cdc 2018-12-21 14:48:04 +07:00
hathach
89be1cf9f8 Merge branch 'master' into devlocal 2018-12-21 12:17:48 +07:00
hathach
d79fcb2ea5 fix #37
- dfu cdc write exact bytes of firmware which is not a muliplier of 256.
This cause incorrect section index with uf2 drive. Solution is round up
current flash size to 256
- also fix incorrect block number causing it is impossible to use old
current.uf2 to update
2018-12-21 12:17:14 +07:00
hathach
5c38bc8957
fix issue nrf52840 not reset properly when upgrading bootloader+sd combo
- root cause tusb_task()/cdc task is called when usb is not inited (in
case of sd upgrade)
2018-12-20 00:50:14 +07:00
hathach
19c3721151
clean up 2018-12-19 23:20:35 +07:00
hathach
c69ae13423 finished testing led pattern 2018-12-19 18:29:24 +07:00
hathach
87a0124cd9 add product link to feather nrf52840 2018-12-19 17:21:10 +07:00
hathach
64f2f671f6 fixed the incosnsitent led pattern by using systick to call led_tick() 2018-12-19 17:08:23 +07:00
hathach
90cf2e53cb clean up 2018-12-19 16:54:24 +07:00
Scott Shawcroft
73a9d50236
Review comments 2018-12-04 22:54:45 -08:00
Scott Shawcroft
42e1a0639c
Fix argon LED 2018-12-04 16:33:24 -08:00
Scott Shawcroft
f2b9422127
Use python2 2018-12-04 16:30:02 -08:00
Scott Shawcroft
57345c9928
Fix Particle and refine build names 2018-12-04 16:03:33 -08:00
Scott Shawcroft
1b35dbf643
Add build script and hook it into Travis 2018-12-04 15:18:49 -08:00
Scott Shawcroft
2ece2daf90
Rework LED flashing and add Particle's boards 2018-12-04 13:45:55 -08:00
hathach
f30199f503
change neopixel color 2018-11-24 01:27:37 +07:00
hathach
5e0195ddb4
update tinyusb, correct neopixel for usb enumeration
added binary for feather nrf52840
2018-11-23 15:54:02 +07:00
hathach
12d68f592c
add neopixel support 2018-11-23 15:00:59 +07:00
hathach
4f48b8b51a
rename led blink fast name 2018-11-23 11:46:21 +07:00
hathach
94e23a928c feed wdt in bootloader if enabled. Since it is impossible to disable wdt 2018-11-19 17:01:45 +07:00
hathach
37690823ac update segger project for SD 6.1.1 2018-11-09 22:29:59 +07:00
hathach
3925ef5872 add stop LF clock in board_init()
just in case we jump from application without reset
2018-11-08 20:17:36 +07:00
hathach
3de5afc067 Use RC as LF source for all board compatible 2018-10-30 15:24:57 +07:00
hathach
cb1ae6d947 add need_erase for flash_nrf5x. Only uf2 erase when flush, dfu serial (uart and cdc) will prepare erase in advance. 2018-10-02 20:41:53 +07:00
hathach
51411ff85d finally fix #31 using erasing in advance and skip erase on the fly for nrf52832.
Note A small amount of delay (10 ms) is also added by adafruit-nrfutil
after each 4KB to be safe.
2018-10-02 16:55:55 +07:00
hathach
f83e47c83b more clean up 2018-10-01 13:08:14 +07:00
hathach
59999d30d2 clean up 2018-09-30 23:42:40 +07:00
hathach
232bc3ab19 clean up 2018-09-30 23:01:20 +07:00
hathach
104a4713d0 clean up 2018-09-28 23:58:43 +07:00
hathach
f14aebba1d rename flash_ to flash_nrf5x_ 2018-09-28 23:45:27 +07:00
hathach
f9532acaf8 figure the line causing timeout issue 2018-09-28 23:43:27 +07:00
hathach
d5dcd3a564 rename flash to flash_nrf5x 2018-09-28 23:41:46 +07:00
hathach
50dec0e77a move uf2 led blink fast to ghostfat 2018-09-28 13:37:01 +07:00
hathach
7cbf14c5e9 add ses nrf52832 mem layout 2018-09-28 12:13:13 +07:00
hathach
2925c60a47 update ses for nrf52832 2018-09-28 12:06:56 +07:00
hathach
d4e616ff56 clean up 2018-09-28 11:02:46 +07:00
Dan Halbert
646838261c add pca10059 2018-09-06 13:46:11 -04:00
hathach
bb4891debc add build date to INFO_UF2.TXT 2018-08-31 02:35:59 +07:00
hathach
d8fb8bdbe1 add #26 double reset to DFU, only work with nrf52840 (won't work with nrf52832) 2018-08-31 02:25:47 +07:00
hathach
4924e6787f remove "Adafruit" in model with pca10056 board 2018-08-29 16:30:03 +07:00
hathach
d9209fdcdf usb serial string = device ID 2018-08-29 12:44:18 +07:00
hathach
633885aa51 fix OTA blinky pattern 2018-08-22 16:00:42 +07:00
hathach
8b30c417f8 fix adv issue with SD 6.1.0. Add binaries for 6.1.0r0 2018-08-22 13:28:29 +07:00
hathach
daa1b83144 implement #19 serial descriptor based on deviceid 2018-08-21 15:07:17 +07:00
hathach
6feea4e069 fix issue with dfu startup on nrf52832, change to adafruit-nrfutil
clean up dfu startup
2018-08-21 14:14:23 +07:00
hathach
3209ff4471 fix build error with nrf52832 2018-08-16 19:29:42 +07:00
hathach
8c66a55511 add CDC mode only for use with Arduino touch 1200
fix issue with reading current.uf2 size when flashed with jlink
2018-08-16 19:27:27 +07:00
hathach
0b3f49f4a1 change to dynamic descriptor for serial only mode 2018-08-16 18:17:42 +07:00
hathach
e585ffc26c clean up 2018-08-16 03:50:11 +07:00
hathach
ab8d24f935 OTA cannot start with SD v6.1.0, but start without issue with 6.0.0
force ota for testing.
2018-08-14 18:54:49 +07:00
hathach
600925740f clean up 2018-08-14 17:20:06 +07:00
hathach
85ad6e6b65 add boards.c , remove msc_uf2.h lots of clean up and refactor 2018-08-14 15:56:24 +07:00
hathach
e4716816c2 clean up 2018-08-14 14:16:09 +07:00
hathach
4eee219b5a use PWM0 & PWM1 for led blinky fix #14 2018-08-14 00:56:51 +07:00
hathach
1c2911a63c close #18, close #19
softdevice is only enabled with OTA mode
2018-08-13 21:50:55 +07:00
hathach
fe712fb588 resolve #18, dfu serial able to run without SD 2018-08-13 18:11:47 +07:00
hathach
e946aabd6d uf2 does not depend on softdevice 2018-08-11 11:43:57 +07:00
hathach
b47927f95c clean up 2018-08-11 10:50:40 +07:00
hathach
971619aa7e rename boards
feather52832 to feather_nrf52832
feather52840 to feather_nrf52840
2018-08-11 10:50:21 +07:00
hathach
4846bde987 clean up 2018-08-11 00:39:23 +07:00
hathach
433523b28a update ses 2018-08-11 00:19:09 +07:00
hathach
e06a35ce74 add family flag and value to read uf2 file 2018-08-11 00:19:01 +07:00
hathach
94a17d720c move flash_write and flush to seperate files for other usage 2018-08-11 00:09:17 +07:00
hathach
bbee654e1c clean up 2018-08-10 22:29:35 +07:00
hathach
352c44c90d prevent dfu 832 bootloader on 840 and vice versa 2018-08-09 12:37:39 +07:00
hathach
c176894075 implemennt uf2 family option #10 2018-08-08 19:52:51 +07:00
hathach
31e5f77af8 ses 2018-08-08 18:20:48 +07:00
hathach
25671db338 solve #9, disable softdevice when upgrading with uf2 file 2018-08-08 18:01:09 +07:00
hathach
69ff86ffd2 clean up 2018-08-08 17:14:58 +07:00
hathach
4d39caa0f7 fix #15
disable softdevice after DFU
2018-08-08 16:55:57 +07:00
hathach
54c2c7db43 rename ses project 2018-08-08 16:03:49 +07:00
hathach
e4830b3c33 rename ses 2018-08-08 16:02:12 +07:00
hathach
bebee4bf3c ses is updated 2018-08-08 16:00:29 +07:00
hathach
59d6ce2b8e ses update 2018-08-08 15:33:42 +07:00
hathach
89076f85f4 update segger project 2018-08-08 15:21:08 +07:00
hathach
f41c039228 move boards.h to src 2018-08-08 15:19:02 +07:00
hathach
de7ab6d00d more clean up 2018-08-08 01:03:33 +07:00
hathach
6f40f02537 more clean up 2018-08-08 00:41:41 +07:00
hathach
108e47438e use systick for led blink
clean up
2018-08-08 00:34:48 +07:00
hathach
0d301a23e2 clean up bsp 2018-08-07 22:23:33 +07:00
hathach
8c33712848 move a file 2018-08-07 22:19:57 +07:00
hathach
0e9d4f4341 clean up blue led blink 2018-08-07 22:09:51 +07:00
hathach
8786955225 clean up bsp 2018-08-07 22:00:35 +07:00