b3b9e089f4
clean up
2019-04-24 16:51:31 +07:00
6bbcab7f50
update uf2 product name
2019-04-24 16:46:25 +07:00
137785f2f0
update uf2 index url, add UF2_ prefix for volume lable and index url
2019-04-24 16:31:08 +07:00
4ec938230d
update uf2 BOARD_ID
2019-04-24 16:17:00 +07:00
9a0ee51d91
rename macros.h to compile_date.h
2019-04-24 12:31:09 +07:00
3fec038ed8
remove ARRAY_SIZE2 since bootloader is only built with C
2019-04-24 12:26:26 +07:00
ca400565b3
clean up
2019-04-24 12:08:58 +07:00
bcbd3fa089
enhance board management
2019-04-24 12:03:26 +07:00
44967695a4
Merge branch 'master' into develop
2019-04-24 10:16:39 +07:00
389c05b643
Add support for Electronut Labs Papyr
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-04-19 11:27:14 +05:30
d4cc11e132
change in file license term from BSD to MIT
2019-03-27 13:38:36 +07:00
2713069643
fix #59 incorrect button mapping for feather nrf52840
2019-03-27 13:03:41 +07:00
66d1770407
manually add another lost comment
2019-03-19 01:01:50 -07:00
8ab4774c93
Manual merge?
...
Pickup a couple changes that don't seem to be propagating?
Possible that there's some git merge I missed, but it's simple enough to fix manually.
2019-03-19 00:57:24 -07:00
1b54f0457d
PR review requested changes.
...
Per hathach's request, remove built-in test option.
Per hathach's request, remote __TIME__ from info file.
2019-03-19 00:37:53 -07:00
04fc396fd8
Put macros into new file, rather than uf2.h.
2019-03-13 23:49:52 -07:00
04e0df1c18
prepare to split file
2019-03-13 23:40:18 -07:00
6d58633db0
Merge branch 'master' of https://github.com/adafruit/Adafruit_nRF52_Bootloader into patch-6
...
# Conflicts:
# src/usb/uf2/ghostfat.c
2019-03-13 22:39:12 -07:00
174e6e9724
Fix Directory entries
...
The media would show as corrupt in CMD.EXE in Windows.
This is because the date/time fields were invalid.
Since this needed to be fixed anyways, update so that
the date and time correspond to the time that the
preprocessor parsed the source file.
2019-03-13 22:05:57 -07:00
53a99195bf
Raises file limit from 14 to 62 files.
...
Enable all four sectors of root directory to contain files.
2019-03-13 21:38:59 -07:00
8def8aee53
Safer code
...
Add additional compile-time assertions
Add additional comments to define limitations future maintainers should be aware of.
2019-03-13 18:28:43 -07:00
c51a227fd9
Add static assert
...
This guards against future increase in number of files
causing buffer overflow when reading the first root directory sector.
2019-03-13 15:24:42 -07:00
113195eabd
Merge branch 'master' into patch-2
2019-03-13 00:58:21 -07:00
0eeff3e679
Merge pull request #53 from henrygab/patch-3
...
Fix signed/unsigned bug.
2019-03-13 00:55:54 -07:00
be5a925f72
Merge pull request #55 from henrygab/patch-4
...
Use local variable to store partially-calculated size.
2019-03-13 00:53:37 -07:00
b8a0551678
Use local variable to store partially-calculated size.
...
This avoid re-entrancy problems, such as if this is ever
interrupted mid-execution, and called a second time before
the initial execution completes.
2019-03-12 13:41:33 -07:00
0f216b8618
Fix spacing
2019-03-12 13:13:58 -07:00
52cfdaa2d2
Fix signed/unsigned bug.
2019-03-12 13:05:21 -07:00
a258c6d988
Avoid returning uninitialized memory
2019-03-12 12:57:51 -07:00
e0251415e7
Add some additional comments.
2019-03-12 12:29:05 -07:00
12bb62eadd
Per request, keep hard drive type in boot block.
...
Update the .PhysicalDrive in boot block.
Update the first fat entries to match MediaDescriptor of boot block.
2019-03-12 12:09:49 -07:00
e2afc36dae
Fix media type mismatch
...
Fix the boot sector media descriptor to match the first FAT entries.
2019-03-10 20:02:56 -07:00
01492634b6
Use RGB red and blue as primary and secondary.
...
The code currently expects a primary LED no matter what so the
RGB led support combined with that clobbers the nice pulsing primary.
2019-03-03 21:12:30 -08:00
05726e2575
Initial MakerDiary MDK nrf52840 USB dongle support.
...
Many TODOs to address but it builds and appears at first glance to work...
2019-03-03 18:58:34 -08:00
57aa554430
update tinyusb to latest for scsi write10 complete fix
2019-02-22 14:46:16 +07:00
9ed3f5ea32
fix #46 complete uf2 writing using tud_msc_write10_complete_cb
2019-02-22 00:21:34 +07:00
d9b275c321
increase buffer depth to fix OTA issue with nrfConnect on iOS
...
- also add optional debug helper
- increase led conn cycle when ble connected for easier recognition
2019-02-15 12:12:11 +07:00
981a6976e2
change HCI_RX_BUF_QUEUE_SIZE back to 4
2019-01-31 22:50:42 +07:00
7ec0ff51f0
Merge pull request #40 from se7ensong/OTA_fix
...
Fix OTA using nRF toolbox on iPhone (tested on SE and XS)
2019-01-31 22:35:12 +07:00
3737d4bc12
update segger project, cleanup
2019-01-31 21:39:02 +07:00
7279bd9b32
added metro nrf52840 revA
...
clean up makefile
2019-01-31 18:01:41 +07:00
2f1eec7118
fix #41 use RXD,TXD in board header
2019-01-14 12:50:20 +07:00
3611a0579e
minor clean up for pca10059
2019-01-11 11:36:42 +07:00
04f05dac64
Fix OTA using nRF toolbox on iPhone (tested on SE and XS)
2019-01-10 13:09:24 +00:00
95cbe3b129
fix PWM psel[1] is not reset to 0xffffffff when teardown
...
also move neopixel to pwm1
2019-01-10 15:55:03 +07:00
9ece5f64a9
clean up makefile
2019-01-04 07:00:45 +07:00
a316c8bd67
reduce delay to 50us
2018-12-21 15:04:48 +07:00
25f6d395bc
fix neopixel didn't turn off after dfu cdc
2018-12-21 14:48:04 +07:00
89be1cf9f8
Merge branch 'master' into devlocal
2018-12-21 12:17:48 +07:00
d79fcb2ea5
fix #37
...
- dfu cdc write exact bytes of firmware which is not a muliplier of 256.
This cause incorrect section index with uf2 drive. Solution is round up
current flash size to 256
- also fix incorrect block number causing it is impossible to use old
current.uf2 to update
2018-12-21 12:17:14 +07:00
5c38bc8957
fix issue nrf52840 not reset properly when upgrading bootloader+sd combo
...
- root cause tusb_task()/cdc task is called when usb is not inited (in
case of sd upgrade)
2018-12-20 00:50:14 +07:00
19c3721151
clean up
2018-12-19 23:20:35 +07:00
c69ae13423
finished testing led pattern
2018-12-19 18:29:24 +07:00
87a0124cd9
add product link to feather nrf52840
2018-12-19 17:21:10 +07:00
64f2f671f6
fixed the incosnsitent led pattern by using systick to call led_tick()
2018-12-19 17:08:23 +07:00
90cf2e53cb
clean up
2018-12-19 16:54:24 +07:00
73a9d50236
Review comments
2018-12-04 22:54:45 -08:00
42e1a0639c
Fix argon LED
2018-12-04 16:33:24 -08:00
f2b9422127
Use python2
2018-12-04 16:30:02 -08:00
57345c9928
Fix Particle and refine build names
2018-12-04 16:03:33 -08:00
1b35dbf643
Add build script and hook it into Travis
2018-12-04 15:18:49 -08:00
2ece2daf90
Rework LED flashing and add Particle's boards
2018-12-04 13:45:55 -08:00
f30199f503
change neopixel color
2018-11-24 01:27:37 +07:00
5e0195ddb4
update tinyusb, correct neopixel for usb enumeration
...
added binary for feather nrf52840
2018-11-23 15:54:02 +07:00
12d68f592c
add neopixel support
2018-11-23 15:00:59 +07:00
4f48b8b51a
rename led blink fast name
2018-11-23 11:46:21 +07:00
94e23a928c
feed wdt in bootloader if enabled. Since it is impossible to disable wdt
2018-11-19 17:01:45 +07:00
37690823ac
update segger project for SD 6.1.1
2018-11-09 22:29:59 +07:00
3925ef5872
add stop LF clock in board_init()
...
just in case we jump from application without reset
2018-11-08 20:17:36 +07:00
3de5afc067
Use RC as LF source for all board compatible
2018-10-30 15:24:57 +07:00
cb1ae6d947
add need_erase for flash_nrf5x. Only uf2 erase when flush, dfu serial (uart and cdc) will prepare erase in advance.
2018-10-02 20:41:53 +07:00
51411ff85d
finally fix #31 using erasing in advance and skip erase on the fly for nrf52832.
...
Note A small amount of delay (10 ms) is also added by adafruit-nrfutil
after each 4KB to be safe.
2018-10-02 16:55:55 +07:00
f83e47c83b
more clean up
2018-10-01 13:08:14 +07:00
59999d30d2
clean up
2018-09-30 23:42:40 +07:00
232bc3ab19
clean up
2018-09-30 23:01:20 +07:00
104a4713d0
clean up
2018-09-28 23:58:43 +07:00
f14aebba1d
rename flash_ to flash_nrf5x_
2018-09-28 23:45:27 +07:00
f9532acaf8
figure the line causing timeout issue
2018-09-28 23:43:27 +07:00
d5dcd3a564
rename flash to flash_nrf5x
2018-09-28 23:41:46 +07:00
50dec0e77a
move uf2 led blink fast to ghostfat
2018-09-28 13:37:01 +07:00
7cbf14c5e9
add ses nrf52832 mem layout
2018-09-28 12:13:13 +07:00
2925c60a47
update ses for nrf52832
2018-09-28 12:06:56 +07:00
d4e616ff56
clean up
2018-09-28 11:02:46 +07:00
646838261c
add pca10059
2018-09-06 13:46:11 -04:00
bb4891debc
add build date to INFO_UF2.TXT
2018-08-31 02:35:59 +07:00
d8fb8bdbe1
add #26 double reset to DFU, only work with nrf52840 (won't work with nrf52832)
2018-08-31 02:25:47 +07:00
4924e6787f
remove "Adafruit" in model with pca10056 board
2018-08-29 16:30:03 +07:00
d9209fdcdf
usb serial string = device ID
2018-08-29 12:44:18 +07:00
633885aa51
fix OTA blinky pattern
2018-08-22 16:00:42 +07:00
8b30c417f8
fix adv issue with SD 6.1.0. Add binaries for 6.1.0r0
2018-08-22 13:28:29 +07:00
daa1b83144
implement #19 serial descriptor based on deviceid
2018-08-21 15:07:17 +07:00
6feea4e069
fix issue with dfu startup on nrf52832, change to adafruit-nrfutil
...
clean up dfu startup
2018-08-21 14:14:23 +07:00
3209ff4471
fix build error with nrf52832
2018-08-16 19:29:42 +07:00
8c66a55511
add CDC mode only for use with Arduino touch 1200
...
fix issue with reading current.uf2 size when flashed with jlink
2018-08-16 19:27:27 +07:00
0b3f49f4a1
change to dynamic descriptor for serial only mode
2018-08-16 18:17:42 +07:00
e585ffc26c
clean up
2018-08-16 03:50:11 +07:00
ab8d24f935
OTA cannot start with SD v6.1.0, but start without issue with 6.0.0
...
force ota for testing.
2018-08-14 18:54:49 +07:00
600925740f
clean up
2018-08-14 17:20:06 +07:00
85ad6e6b65
add boards.c , remove msc_uf2.h lots of clean up and refactor
2018-08-14 15:56:24 +07:00
e4716816c2
clean up
2018-08-14 14:16:09 +07:00
hathach
Tavish Naruka
Henry Gabryjelski
hathach
Gregory P. Smith
Song Luan
Scott Shawcroft
Dan Halbert