xobs/simmel-bootloader
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

clean up makefile, move linker out of src folder

Browse Source
This commit is contained in:
hathach
2020-03-24 21:07:20 +07:00
parent bfa269c55f
commit cb735eaf8b
5 changed files with 17 additions and 23 deletions
Download Patch File Download Diff File Expand all files Collapse all files

91
linker/nrf52833_s140_v6.ld Normal file
View File

@ -0,0 +1,91 @@
/* Linker script to configure memory regions. */
SEARCH_DIR(.)
GROUP(-lgcc -lc -lnosys)
MEMORY
{
/** Flash start address for the bootloader. This setting will also be stored in UICR to allow the
* MBR to init the bootloader when starting the system. This value must correspond to
* BOOTLOADER_REGION_START found in dfu_types.h. The system is prevented from starting up if
* those values do not match. The check is performed in main.c, see
* APP_ERROR_CHECK_BOOL(*((uint32_t *)NRF_UICR_BOOT_START_ADDRESS) == BOOTLOADER_REGION_START);
*/
FLASH (rx) : ORIGIN = 0x74000, LENGTH = 0x7E000-0x74000 /* 40 KB */
/** Location of mbr params page in flash. */
MBR_PARAMS_PAGE (rw) : ORIGIN = 0x0007E000, LENGTH = 0x1000
/** Location of bootloader setting in flash. */
BOOTLOADER_SETTINGS (rw) : ORIGIN = 0x0007F000, LENGTH = 0x1000
/** RAM Region for bootloader. */
/* Avoid conflict with NOINIT for OTA bond sharing */
RAM (rwx) : ORIGIN = 0x20008000, LENGTH = 0x20020000-0x20008000
/* Location for double reset detection, no init */
DBL_RESET (rwx) : ORIGIN = 0x20007F7C, LENGTH = 0x04
/** Location of non initialized RAM. Non initialized RAM is used for exchanging bond information
* from application to bootloader when using buttonluss DFU OTA. */
NOINIT (rwx) : ORIGIN = 0x20007F80, LENGTH = 0x80
/** Location in UICR where bootloader start address is stored. */
UICR_BOOTLOADER (r) : ORIGIN = 0x10001014, LENGTH = 0x04
/** Location in UICR where mbr params page address is stored. */
UICR_MBR_PARAM_PAGE(r) : ORIGIN = 0x10001018, LENGTH = 0x04
}
SECTIONS
{
.fs_data_out ALIGN(4):
{
PROVIDE( __start_fs_data = .);
KEEP(*(fs_data))
PROVIDE( __stop_fs_data = .);
} = 0
/* Place the bootloader settings page in flash. */
.bootloaderSettings(NOLOAD) :
{
} > BOOTLOADER_SETTINGS
/* Write the bootloader address in UICR. */
.uicrBootStartAddress :
{
KEEP(*(.uicrBootStartAddress))
} > UICR_BOOTLOADER
/* Place the mbr params page in flash. */
.mbrParamsPage(NOLOAD) :
{
} > MBR_PARAMS_PAGE
/* Write the bootloader address in UICR. */
.uicrMbrParamsPageAddress :
{
KEEP(*(.uicrMbrParamsPageAddress))
} > UICR_MBR_PARAM_PAGE
.dbl_reset(NOLOAD) :
{
} > DBL_RESET
/* No init RAM section in bootloader. Used for bond information exchange. */
.noinit(NOLOAD) :
{
} > NOINIT
/* other placements follow here... */
}
INCLUDE "nrf_common.ld"

98
linker/nrf52840_s140_v6.ld Normal file
View File

@ -0,0 +1,98 @@
/* Linker script to configure memory regions. */
SEARCH_DIR(.)
GROUP(-lgcc -lc -lnosys)
MEMORY
{
/** Flash start address for the bootloader. This setting will also be stored in UICR to allow the
* MBR to init the bootloader when starting the system. This value must correspond to
* BOOTLOADER_REGION_START found in dfu_types.h. The system is prevented from starting up if
* those values do not match. The check is performed in main.c, see
* APP_ERROR_CHECK_BOOL(*((uint32_t *)NRF_UICR_BOOT_START_ADDRESS) == BOOTLOADER_REGION_START);
*/
FLASH (rx) : ORIGIN = 0xF4000, LENGTH = 0xFE000-0xF4000-2048 /* 38 KB */
BOOTLOADER_CONFIG (r): ORIGIN = 0xFE000 - 2048, LENGTH = 2048
/** Location of mbr params page in flash. */
MBR_PARAMS_PAGE (rw) : ORIGIN = 0xFE000, LENGTH = 0x1000
/** Location of bootloader setting in flash. */
BOOTLOADER_SETTINGS (rw) : ORIGIN = 0xFF000, LENGTH = 0x1000
/** RAM Region for bootloader. */
/* Avoid conflict with NOINIT for OTA bond sharing */
RAM (rwx) : ORIGIN = 0x20008000, LENGTH = 0x20040000-0x20008000
/* Location for double reset detection, no init */
DBL_RESET (rwx) : ORIGIN = 0x20007F7C, LENGTH = 0x04
/** Location of non initialized RAM. Non initialized RAM is used for exchanging bond information
* from application to bootloader when using buttonluss DFU OTA. */
NOINIT (rwx) : ORIGIN = 0x20007F80, LENGTH = 0x80
/** Location in UICR where bootloader start address is stored. */
UICR_BOOTLOADER (r) : ORIGIN = 0x10001014, LENGTH = 0x04
/** Location in UICR where mbr params page address is stored. */
UICR_MBR_PARAM_PAGE(r) : ORIGIN = 0x10001018, LENGTH = 0x04
}
SECTIONS
{
.fs_data_out ALIGN(4):
{
PROVIDE( __start_fs_data = .);
KEEP(*(fs_data))
PROVIDE( __stop_fs_data = .);
} = 0
.bootloaderConfig :
{
KEEP(*(.bootloaderConfig))
} > BOOTLOADER_CONFIG
/* Place the bootloader settings page in flash. */
.bootloaderSettings(NOLOAD) :
{
} > BOOTLOADER_SETTINGS
/* Write the bootloader address in UICR. */
.uicrBootStartAddress :
{
KEEP(*(.uicrBootStartAddress))
} > UICR_BOOTLOADER
/* Place the mbr params page in flash. */
.mbrParamsPage(NOLOAD) :
{
} > MBR_PARAMS_PAGE
/* Write the bootloader address in UICR. */
.uicrMbrParamsPageAddress :
{
KEEP(*(.uicrMbrParamsPageAddress))
} > UICR_MBR_PARAM_PAGE
.dbl_reset(NOLOAD) :
{
} > DBL_RESET
/* No init RAM section in bootloader. Used for bond information exchange. */
.noinit(NOLOAD) :
{
} > NOINIT
/* other placements follow here... */
}
INCLUDE "nrf_common.ld"

89
linker/nrf52_s132_v6.ld Normal file
View File

@ -0,0 +1,89 @@
/* Linker script to configure memory regions. */
SEARCH_DIR(.)
GROUP(-lgcc -lc -lnosys)
MEMORY
{
/** Flash start address for the bootloader. This setting will also be stored in UICR to allow the
* MBR to init the bootloader when starting the system. This value must correspond to
* BOOTLOADER_REGION_START found in dfu_types.h. The system is prevented from starting up if
* those values do not match. The check is performed in main.c, see
* APP_ERROR_CHECK_BOOL(*((uint32_t *)NRF_UICR_BOOT_START_ADDRESS) == BOOTLOADER_REGION_START);
*/
FLASH (rx) : ORIGIN = 0x74000, LENGTH = 0x7E000-0x74000 /* 40 KB */
/** Location of mbr params page in flash. */
MBR_PARAMS_PAGE (rw) : ORIGIN = 0x7E000, LENGTH = 0x1000
/** Location of bootloader setting in flash. */
BOOTLOADER_SETTINGS (rw) : ORIGIN = 0x7F000, LENGTH = 0x1000
/** RAM Region for bootloader. */
RAM (rwx) : ORIGIN = 0x20008000, LENGTH = 0x20010000-0x20008000
/* Location for double reset detection, no init */
DBL_RESET (rwx) : ORIGIN = 0x20007F7C, LENGTH = 0x04
/** Location of non initialized RAM. Non initialized RAM is used for exchanging bond information
* from application to bootloader when using buttonluss DFU OTA. */
NOINIT (rwx) : ORIGIN = 0x20007F80, LENGTH = 0x80
/** Location in UICR where bootloader start address is stored. */
UICR_BOOTLOADER (r) : ORIGIN = 0x10001014, LENGTH = 0x04
/** Location in UICR where mbr params page address is stored. */
UICR_MBR_PARAM_PAGE(r) : ORIGIN = 0x10001018, LENGTH = 0x04
}
SECTIONS
{
.fs_data_out ALIGN(4):
{
PROVIDE( __start_fs_data = .);
KEEP(*(fs_data))
PROVIDE( __stop_fs_data = .);
} = 0
/* Place the bootloader settings page in flash. */
.bootloaderSettings(NOLOAD) :
{
} > BOOTLOADER_SETTINGS
/* Write the bootloader address in UICR. */
.uicrBootStartAddress :
{
KEEP(*(.uicrBootStartAddress))
} > UICR_BOOTLOADER
/* Place the mbr params page in flash. */
.mbrParamsPage(NOLOAD) :
{
} > MBR_PARAMS_PAGE
/* Write the bootloader address in UICR. */
.uicrMbrParamsPageAddress :
{
KEEP(*(.uicrMbrParamsPageAddress))
} > UICR_MBR_PARAM_PAGE
.dbl_reset(NOLOAD) :
{
} > DBL_RESET
/* No init RAM section in bootloader. Used for bond information exchange. */
.noinit(NOLOAD) :
{
} > NOINIT
/* other placements follow here... */
}
INCLUDE "nrf_common.ld"

168
linker/nrf_common.ld Normal file
View File

@ -0,0 +1,168 @@
/* Linker script for Nordic Semiconductor nRF devices
*
* Version: Sourcery G++ 4.5-1
* Support: https://support.codesourcery.com/GNUToolchain/
*
* Copyright (c) 2007, 2008, 2009, 2010 CodeSourcery, Inc.
*
* The authors hereby grant permission to use, copy, modify, distribute,
* and license this software and its documentation for any purpose, provided
* that existing copyright notices are retained in all copies and that this
* notice is included verbatim in any distributions. No written agreement,
* license, or royalty fee is required for any of the authorized uses.
* Modifications to this software may be copyrighted by their authors
* and need not follow the licensing terms described here, provided that
* the new terms are clearly indicated on the first page of each file where
* they apply.
*/
OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
/* Linker script to place sections and symbol values. Should be used together
* with other linker script that defines memory regions FLASH and RAM.
* It references following symbols, which must be defined in code:
* Reset_Handler : Entry of reset handler
*
* It defines following symbols, which code can use without definition:
* __exidx_start
* __exidx_end
* __etext
* __data_start__
* __preinit_array_start
* __preinit_array_end
* __init_array_start
* __init_array_end
* __fini_array_start
* __fini_array_end
* __data_end__
* __bss_start__
* __bss_end__
* __end__
* end
* __HeapBase
* __HeapLimit
* __StackLimit
* __StackTop
* __stack
*/
ENTRY(Reset_Handler)
SECTIONS
{
.text :
{
KEEP(*(.isr_vector))
*(.text*)
KEEP(*(.init))
KEEP(*(.fini))
/* .ctors */
*crtbegin.o(.ctors)
*crtbegin?.o(.ctors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
*(SORT(.ctors.*))
*(.ctors)
/* .dtors */
*crtbegin.o(.dtors)
*crtbegin?.o(.dtors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
*(SORT(.dtors.*))
*(.dtors)
*(.rodata*)
KEEP(*(.eh_frame*))
} > FLASH
.ARM.extab :
{
*(.ARM.extab* .gnu.linkonce.armextab.*)
} > FLASH
__exidx_start = .;
.ARM.exidx :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
} > FLASH
__exidx_end = .;
__etext = .;
.data : AT (__etext)
{
__data_start__ = .;
*(vtable)
*(.data*)
. = ALIGN(4);
/* preinit data */
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP(*(.preinit_array))
PROVIDE_HIDDEN (__preinit_array_end = .);
. = ALIGN(4);
/* init data */
PROVIDE_HIDDEN (__init_array_start = .);
KEEP(*(SORT(.init_array.*)))
KEEP(*(.init_array))
PROVIDE_HIDDEN (__init_array_end = .);
. = ALIGN(4);
/* finit data */
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP(*(SORT(.fini_array.*)))
KEEP(*(.fini_array))
PROVIDE_HIDDEN (__fini_array_end = .);
KEEP(*(.jcr*))
. = ALIGN(4);
/* All data end */
__data_end__ = .;
} > RAM
.bss :
{
. = ALIGN(4);
__bss_start__ = .;
*(.bss*)
*(COMMON)
. = ALIGN(4);
__bss_end__ = .;
} > RAM
.heap (COPY):
{
__HeapBase = .;
__end__ = .;
PROVIDE(end = .);
KEEP(*(.heap*))
__HeapLimit = .;
} > RAM
/* .stack_dummy section doesn't contains any symbols. It is only
* used for linker to calculate size of stack sections, and assign
* values to stack symbols later */
.stack_dummy (COPY):
{
KEEP(*(.stack*))
} > RAM
/* Set stack top to end of RAM, and stack limit move down by
* size of stack_dummy section */
__StackTop = ORIGIN(RAM) + LENGTH(RAM);
__StackLimit = __StackTop - SIZEOF(.stack_dummy);
PROVIDE(__stack = __StackTop);
/* Check if data + heap + stack exceeds RAM limit */
ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
/* Check if text sections + data exceeds FLASH limit */
DataInitFlashUsed = __bss_start__ - __data_start__;
CodeFlashUsed = __etext - ORIGIN(FLASH);
TotalFlashUsed = CodeFlashUsed + DataInitFlashUsed;
ASSERT(TotalFlashUsed <= LENGTH(FLASH), "region FLASH overflowed with .data and user data")
}