fix linker for 833

compile and able to flash but 52833 is not compatible with S140 v6, need
to upgrade it to S140 v7

Makefile

@@ -21,7 +21,7 @@ SD_FILENAME  = $(SD_NAME)_nrf52_$(SD_VERSION)
 SD_API_PATH  = $(SD_PATH)/$(SD_FILENAME)_API
 SD_HEX       = $(SD_PATH)/$(SD_FILENAME)_softdevice.hex
 
-LD_FILE      = $(SRC_PATH)/linker/$(SD_NAME)_v$(word 1, $(subst ., ,$(SD_VERSION))).ld
+LD_FILE      = $(SRC_PATH)/linker/$(MCU_SUB_VARIANT)_$(SD_NAME)_v$(word 1, $(subst ., ,$(SD_VERSION))).ld
 
 MERGED_FNAME = $(OUTPUT_FILENAME)_$(SD_NAME)_$(SD_VERSION)
 

src/linker/nrf52833_s140_v6.ld

@@ -0,0 +1,91 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  /** Flash start address for the bootloader. This setting will also be stored in UICR to allow the
+   *  MBR to init the bootloader when starting the system. This value must correspond to 
+   *  BOOTLOADER_REGION_START found in dfu_types.h. The system is prevented from starting up if 
+   *  those values do not match. The check is performed in main.c, see
+   *  APP_ERROR_CHECK_BOOL(*((uint32_t *)NRF_UICR_BOOT_START_ADDRESS) == BOOTLOADER_REGION_START);
+   */
+  FLASH (rx) : ORIGIN = 0x74000, LENGTH = 0x7E000-0x74000 /* 40 KB */
+
+  /** Location of mbr params page in flash. */
+  MBR_PARAMS_PAGE (rw) : ORIGIN = 0x0007E000, LENGTH = 0x1000
+  
+  /** Location of bootloader setting in flash. */
+  BOOTLOADER_SETTINGS (rw) : ORIGIN = 0x0007F000, LENGTH = 0x1000
+  
+  
+  
+  /** RAM Region for bootloader. */
+  /* Avoid conflict with NOINIT for OTA bond sharing */
+  RAM (rwx) :  ORIGIN = 0x20008000, LENGTH = 0x20020000-0x20008000
+
+  /* Location for double reset detection, no init */
+  DBL_RESET (rwx) :  ORIGIN = 0x20007F7C, LENGTH = 0x04
+  
+  /** Location of non initialized RAM. Non initialized RAM is used for exchanging bond information
+   *  from application to bootloader when using buttonluss DFU OTA. */
+  NOINIT (rwx) :  ORIGIN = 0x20007F80, LENGTH = 0x80  
+
+
+
+  /** Location in UICR where bootloader start address is stored. */
+  UICR_BOOTLOADER (r) : ORIGIN = 0x10001014, LENGTH = 0x04
+    
+  /** Location in UICR where mbr params page address is stored. */
+  UICR_MBR_PARAM_PAGE(r) : ORIGIN = 0x10001018, LENGTH = 0x04
+}
+
+SECTIONS
+{
+  .fs_data_out ALIGN(4):
+  {
+    PROVIDE( __start_fs_data = .);
+    KEEP(*(fs_data))
+    PROVIDE( __stop_fs_data = .);
+  } = 0
+
+  /* Place the bootloader settings page in flash. */
+  .bootloaderSettings(NOLOAD) :
+  {
+    
+  } > BOOTLOADER_SETTINGS
+
+  /* Write the bootloader address in UICR. */
+  .uicrBootStartAddress : 
+  {
+    KEEP(*(.uicrBootStartAddress))
+  } > UICR_BOOTLOADER
+  
+  /* Place the mbr params page in flash. */
+    .mbrParamsPage(NOLOAD) :
+  {
+    
+  } > MBR_PARAMS_PAGE
+  
+  /* Write the bootloader address in UICR. */
+  .uicrMbrParamsPageAddress :
+  {
+    KEEP(*(.uicrMbrParamsPageAddress))
+  } > UICR_MBR_PARAM_PAGE
+
+  .dbl_reset(NOLOAD) :
+  {
+
+  } > DBL_RESET
+
+  /* No init RAM section in bootloader. Used for bond information exchange. */
+  .noinit(NOLOAD) :
+  {
+
+  } > NOINIT
+
+  /* other placements follow here... */
+}
+
+INCLUDE "nrf_common.ld"

src/linker/nrf52840_s140_v6.ld

@@ -11,7 +11,15 @@ MEMORY
    *  those values do not match. The check is performed in main.c, see
    *  APP_ERROR_CHECK_BOOL(*((uint32_t *)NRF_UICR_BOOT_START_ADDRESS) == BOOTLOADER_REGION_START);
    */
-  FLASH (rx) : ORIGIN = 0xF4000, LENGTH = 0xA000 /* 40 KB */
+  FLASH (rx) : ORIGIN = 0xF4000, LENGTH = 0xFE000-0xF4000 /* 40 KB */
+
+  /** Location of mbr params page in flash. */
+  MBR_PARAMS_PAGE (rw) : ORIGIN = 0xFE000, LENGTH = 0x1000
+  
+  /** Location of bootloader setting in flash. */
+  BOOTLOADER_SETTINGS (rw) : ORIGIN = 0xFF000, LENGTH = 0x1000
+
+
 
   /** RAM Region for bootloader. */
   /* Avoid conflict with NOINIT for OTA bond sharing */
@@ -21,20 +29,14 @@ MEMORY
   DBL_RESET (rwx) :  ORIGIN = 0x20007F7C, LENGTH = 0x04
   
   /** Location of non initialized RAM. Non initialized RAM is used for exchanging bond information
-   *  from application to bootloader when using buttonluss DFU OTA. 
+   *  from application to bootloader when using buttonluss DFU OTA. */
-   */
   NOINIT (rwx) :  ORIGIN = 0x20007F80, LENGTH = 0x80
   
   
-  /** Location of bootloader setting in flash. */
-  BOOTLOADER_SETTINGS (rw) : ORIGIN = 0x000FF000, LENGTH = 0x1000
   
   /** Location in UICR where bootloader start address is stored. */
   UICR_BOOTLOADER (r) : ORIGIN = 0x10001014, LENGTH = 0x04
   
-  /** Location of mbr params page in flash. */
-  MBR_PARAMS_PAGE (rw) : ORIGIN = 0x000FE000, LENGTH = 0x1000
-  
   /** Location in UICR where mbr params page address is stored. */
   UICR_MBR_PARAM_PAGE(r) : ORIGIN = 0x10001018, LENGTH = 0x04
 }

src/linker/nrf52_s132_v6.ld

@@ -11,28 +11,31 @@ MEMORY
    *  those values do not match. The check is performed in main.c, see
    *  APP_ERROR_CHECK_BOOL(*((uint32_t *)NRF_UICR_BOOT_START_ADDRESS) == BOOTLOADER_REGION_START);
    */
-  FLASH (rx) : ORIGIN = 0x74000, LENGTH = 0xA000 /* 40 KB */
+  FLASH (rx) : ORIGIN = 0x74000, LENGTH = 0x7E000-0x74000 /* 40 KB */
+
+  /** Location of mbr params page in flash. */
+  MBR_PARAMS_PAGE (rw) : ORIGIN = 0x7E000, LENGTH = 0x1000
+  
+  /** Location of bootloader setting in flash. */
+  BOOTLOADER_SETTINGS (rw) : ORIGIN = 0x7F000, LENGTH = 0x1000
+
+
 
   /** RAM Region for bootloader. */
-  RAM (rwx) :  ORIGIN = 0x20003000, LENGTH = 0x20007F7C-0x20003000
+  RAM (rwx) :  ORIGIN = 0x20008000, LENGTH = 0x20010000-0x20008000
 
   /* Location for double reset detection, no init */
   DBL_RESET (rwx) :  ORIGIN = 0x20007F7C, LENGTH = 0x04
 
   /** Location of non initialized RAM. Non initialized RAM is used for exchanging bond information
-   *  from application to bootloader when using buttonluss DFU OTA. 
+   *  from application to bootloader when using buttonluss DFU OTA. */
-   */
   NOINIT (rwx) :  ORIGIN = 0x20007F80, LENGTH = 0x80
 
-  /** Location of bootloader setting in flash. */
+
-  BOOTLOADER_SETTINGS (rw) : ORIGIN = 0x0007F000, LENGTH = 0x1000
   
   /** Location in UICR where bootloader start address is stored. */
   UICR_BOOTLOADER (r) : ORIGIN = 0x10001014, LENGTH = 0x04
   
-  /** Location of mbr params page in flash. */
-  MBR_PARAMS_PAGE (rw) : ORIGIN = 0x0007E000, LENGTH = 0x1000
-  
   /** Location in UICR where mbr params page address is stored. */
   UICR_MBR_PARAM_PAGE(r) : ORIGIN = 0x10001018, LENGTH = 0x04
 }