add s132 v6 ld

src/linker/s132_v6.ld

@@ -0,0 +1,78 @@
+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  /** Flash start address for the bootloader. This setting will also be stored in UICR to allow the
+   *  MBR to init the bootloader when starting the system. This value must correspond to 
+   *  BOOTLOADER_REGION_START found in dfu_types.h. The system is prevented from starting up if 
+   *  those values do not match. The check is performed in main.c, see
+   *  APP_ERROR_CHECK_BOOL(*((uint32_t *)NRF_UICR_BOOT_START_ADDRESS) == BOOTLOADER_REGION_START);
+   */
+  FLASH (rx) : ORIGIN = 0x74000, LENGTH = 0xA000 /* 40 KB */
+
+  /** RAM Region for bootloader. */
+  RAM (rwx) :  ORIGIN = 0x20003000, LENGTH = 0x20007F80-0x20003000
+
+  /** Location of non initialized RAM. Non initialized RAM is used for exchanging bond information
+   *  from application to bootloader when using buttonluss DFU OTA. 
+   */
+  NOINIT (rwx) :  ORIGIN = 0x20007F80, LENGTH = 0x80
+
+  /** Location of bootloader setting in flash. */
+  BOOTLOADER_SETTINGS (rw) : ORIGIN = 0x0007F000, LENGTH = 0x1000
+
+  /** Location in UICR where bootloader start address is stored. */
+  UICR_BOOTLOADER (r) : ORIGIN = 0x10001014, LENGTH = 0x04
+  
+  /** Location of mbr params page in flash. */
+  MBR_PARAMS_PAGE (rw) : ORIGIN = 0x0007E000, LENGTH = 0x1000
+  
+  /** Location in UICR where mbr params page address is stored. */
+  UICR_MBR_PARAM_PAGE(r) : ORIGIN = 0x10001018, LENGTH = 0x04
+}
+
+SECTIONS
+{
+  .fs_data_out ALIGN(4):
+  {
+    PROVIDE( __start_fs_data = .);
+    KEEP(*(fs_data))
+    PROVIDE( __stop_fs_data = .);
+  } = 0
+
+  /* Place the bootloader settings page in flash. */
+  .bootloaderSettings(NOLOAD) :
+  {
+    
+  } > BOOTLOADER_SETTINGS
+
+  /* Write the bootloader address in UICR. */
+  .uicrBootStartAddress : 
+  {
+    KEEP(*(.uicrBootStartAddress))
+  } > UICR_BOOTLOADER
+  
+  /* Place the mbr params page in flash. */
+    .mbrParamsPage(NOLOAD) :
+  {
+    
+  } > MBR_PARAMS_PAGE
+  
+  /* Write the bootloader address in UICR. */
+  .uicrMbrParamsPageAddress :
+  {
+    KEEP(*(.uicrMbrParamsPageAddress))
+  } > UICR_MBR_PARAM_PAGE
+
+  /* No init RAM section in bootloader. Used for bond information exchange. */
+  .noinit(NOLOAD) :
+  {
+
+  } > NOINIT
+  /* other placements follow here... */
+}
+
+INCLUDE "nrf_common.ld"