simmel-bootloader/src/main.c

626 lines
18 KiB
C
Raw Normal View History

/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
*
* The information contained herein is property of Nordic Semiconductor ASA.
* Terms and conditions of usage are described in detail in NORDIC
* SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
*
* Licensees are granted free, non-transferable use of the information. NO
* WARRANTY of ANY KIND is provided. This heading must NOT be removed from
* the file.
*
*/
/**@file
*
* @defgroup ble_sdk_app_bootloader_main main.c
* @{
* @ingroup dfu_bootloader_api
* @brief Bootloader project main file.
*
* -# Receive start data packet.
* -# Based on start packet, prepare NVM area to store received data.
* -# Receive data packet.
* -# Validate data packet.
* -# Write Data packet to NVM.
* -# If not finished - Wait for next packet.
* -# Receive stop data packet.
* -# Activate Image, boot application.
*
*/
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include <stddef.h>
2018-02-15 09:27:51 +00:00
#include "nordic_common.h"
#include "sdk_common.h"
#include "dfu_transport.h"
#include "bootloader.h"
#include "bootloader_util.h"
#include "nrf.h"
#include "nrf_soc.h"
#include "nrf_nvic.h"
#include "app_error.h"
#include "nrf_gpio.h"
#include "ble.h"
#include "nrf.h"
#include "ble_hci.h"
#include "app_scheduler.h"
2018-02-15 09:27:51 +00:00
#include "app_timer.h"
#include "nrf_error.h"
#include "boards.h"
#include "pstorage_platform.h"
#include "nrf_mbr.h"
#include "nrf_wdt.h"
#include "nrf_delay.h"
#include "pstorage.h"
#include "nrf_usbd.h"
2018-04-04 13:03:56 +00:00
#include "tusb.h"
2018-04-16 07:03:44 +00:00
#include "tusb_descriptors.h"
2018-04-04 13:03:56 +00:00
#define BOOTLOADER_VERSION_REGISTER NRF_TIMER2->CC[0]
#define LED_BLINK_INTERVAL 100
#define BOOTLOADER_STARTUP_DFU_INTERVAL 1000
/* Magic that written to NRF_POWER->GPREGRET by application when it wish to go into DFU
* - BOOTLOADER_DFU_OTA_MAGIC used by BLEDfu service : SD is already init
* - BOOTLOADER_DFU_OTA_FULLRESET_MAGIC entered by soft reset : SD is not init
* - BOOTLOADER_DFU_SERIAL_MAGIC entered by soft reset : SD is not init
*
* Note: for BOOTLOADER_DFU_OTA_MAGIC Softdevice should not initialized. In other case SD must be initialized
*/
#define BOOTLOADER_DFU_OTA_MAGIC BOOTLOADER_DFU_START // 0xB1
#define BOOTLOADER_DFU_OTA_FULLRESET_MAGIC 0xA8
#define BOOTLOADER_DFU_SERIAL_MAGIC 0x4e
#define BOOTLOADER_BUTTON BUTTON_1 // Button used to enter SW update mode.
#define FRESET_BUTTON BUTTON_2 // Button used in addition to DFU button, to force OTA DFU
#define APP_TIMER_PRESCALER 0 /**< Value of the RTC1 PRESCALER register. */
#define APP_TIMER_OP_QUEUE_SIZE 4 /**< Size of timer operation queues. */
2018-02-15 09:27:51 +00:00
#define SCHED_MAX_EVENT_DATA_SIZE sizeof(app_timer_event_t) /**< Maximum size of scheduler events. */
2018-04-14 05:15:50 +00:00
#define SCHED_QUEUE_SIZE 30 /**< Maximum number of events in the scheduler queue. */
// Helper function
#define memclr(buffer, size) memset(buffer, 0, size)
#define varclr(_var) memclr(_var, sizeof(*(_var)))
#define arrclr(_arr) memclr(_arr, sizeof(_arr))
#define arrcount(_arr) ( sizeof(_arr) / sizeof(_arr[0]) )
// These value must be the same with one in dfu_transport_ble.c
#define BLEGAP_EVENT_LENGTH 6
#define BLEGATT_ATT_MTU_MAX 247
enum { BLE_CONN_CFG_HIGH_BANDWIDTH = 1 };
// Adafruit for factory reset
#define APPDATA_ADDR_START (BOOTLOADER_REGION_START-DFU_APP_DATA_RESERVED)
2018-02-09 16:06:27 +00:00
STATIC_ASSERT( APPDATA_ADDR_START == 0xED000);
2018-04-19 12:15:19 +00:00
void adafruit_factory_reset(void);
volatile bool _freset_erased_complete = false;
// Adafruit for Blink pattern
bool isBlinkFast = false;
bool isOTAConnected = false;
APP_TIMER_DEF( blinky_timer_id );
// true if ble, false if serial
bool _ota_update = false;
bool is_ota(void) { return _ota_update; }
static void button_pin_init(uint32_t pin)
{
nrf_gpio_cfg_sense_input(pin, BUTTON_PULL, NRF_GPIO_PIN_SENSE_LOW);
}
bool button_pressed(uint32_t pin)
{
return (nrf_gpio_pin_read(pin) == 0) ? true : false;
}
static void led_pin_init(uint32_t pin)
{
#ifdef BOARD_METRO52
// LED BLUE is muxed with FRESET. We need to make sure it is
// not wired to GND before configuring it as output.
// Only check if it is not yet configured as OUTPUT
if (pin == LED_BLUE && !bit_test(NRF_GPIO->PIN_CNF[pin], GPIO_PIN_CNF_DIR_Pos))
{
// skip and configure as input if grounded instead of output !!!
if ( button_pressed(pin) ) return;
}
#endif
nrf_gpio_cfg_output(pin);
led_off(pin);
}
void led_control(uint32_t pin, bool state)
{
#ifdef BOARD_METRO52
// Skip if LED_BLUE is configured as input and wiring to GND
// Otherwise configure it as output (it may just transition from hardware GND to open)
if ( pin == LED_2 && !bit_test(NRF_GPIO->PIN_CNF[pin], GPIO_PIN_CNF_DIR_Pos) )
{
if ( button_pressed(pin) ) return;
// configure as output
nrf_gpio_cfg_output(pin);
}
#endif
nrf_gpio_pin_write(pin, state ? LED_STATE_ON : (1-LED_STATE_ON));
}
/*
* Blinking function, there are a few patterns
* - DFU Serial : LED Status blink
* - DFU OTA : LED Status & Conn blink at the same time
* - DFU Flashing : LED Status blink 2x fast
* - Factory Reset : LED Status blink 2x fast
* - Fatal Error : LED Status & Conn blink one after another
*/
static void blinky_handler(void * p_context)
{
static uint8_t state = 0;
static uint32_t count = 0;
count++;
// if not uploading then blink slow (interval/2)
if ( !isBlinkFast && count%2 ) return;
state = 1-state;
led_control(LED_RED, state);
// Blink LED BLUE if OTA mode and not connected
if (is_ota() && !isOTAConnected)
{
led_control(LED_BLUE, state);
}
// Feed all Watchdog just in case application enable it (WDT last through a soft reboot to bootloader)
if ( nrf_wdt_started() )
{
for (uint8_t i=0; i<8; i++) nrf_wdt_reload_request_set(i);
}
}
void blinky_fast_set(bool isFast)
{
isBlinkFast = isFast;
}
void blinky_ota_connected(void)
{
isOTAConnected = true;
}
void blinky_ota_disconneted(void)
{
isOTAConnected = false;
}
/**@brief Function for initializing the BLE stack.
*
* @details Initializes the SoftDevice and the BLE event interrupt.
*
* @param[in] init_softdevice true if SoftDevice should be initialized. The SoftDevice must only
* be initialized if a chip reset has occured. Soft reset from
* application must not reinitialize the SoftDevice.
*/
static uint32_t ble_stack_init(bool init_softdevice)
{
uint32_t err_code;
if (init_softdevice)
{
sd_mbr_command_t com = { .command = SD_MBR_COMMAND_INIT_SD };
err_code = sd_mbr_command(&com);
APP_ERROR_CHECK(err_code);
}
err_code = sd_softdevice_vector_table_base_set(BOOTLOADER_REGION_START);
APP_ERROR_CHECK(err_code);
// Enable Softdevice
nrf_clock_lf_cfg_t clock_cfg =
{
2018-02-15 09:27:51 +00:00
#if 0
.source = NRF_CLOCK_LF_SRC_RC,
.rc_ctiv = 16,
.rc_temp_ctiv = 2,
.accuracy = NRF_CLOCK_LF_ACCURACY_20_PPM
2018-02-15 09:27:51 +00:00
#else
.source = NRF_CLOCK_LF_SRC_XTAL,
.rc_ctiv = 0,
.rc_temp_ctiv = 0,
.accuracy = NRF_CLOCK_LF_ACCURACY_20_PPM
#endif
};
2018-04-04 10:39:26 +00:00
APP_ERROR_CHECK( sd_softdevice_enable(&clock_cfg, app_error_fault_handler) );
sd_nvic_EnableIRQ(SD_EVT_IRQn);
/*------------- Configure BLE params -------------*/
extern uint32_t __data_start__[]; // defined in linker
uint32_t ram_start = (uint32_t) __data_start__;
ble_cfg_t blecfg;
// Configure the maximum number of connections.
varclr(&blecfg);
blecfg.gap_cfg.role_count_cfg.periph_role_count = 1;
blecfg.gap_cfg.role_count_cfg.central_role_count = 0;
blecfg.gap_cfg.role_count_cfg.central_sec_count = 0;
err_code = sd_ble_cfg_set(BLE_GAP_CFG_ROLE_COUNT, &blecfg, ram_start);
// NRF_DFU_BLE_REQUIRES_BONDS
varclr(&blecfg);
blecfg.gatts_cfg.service_changed.service_changed = 1;
err_code = sd_ble_cfg_set(BLE_GATTS_CFG_SERVICE_CHANGED, &blecfg, ram_start);
VERIFY_SUCCESS(err_code);
// ATT MTU
varclr(&blecfg);
blecfg.conn_cfg.conn_cfg_tag = BLE_CONN_CFG_HIGH_BANDWIDTH;
blecfg.conn_cfg.params.gatt_conn_cfg.att_mtu = BLEGATT_ATT_MTU_MAX;
err_code = sd_ble_cfg_set(BLE_CONN_CFG_GATT, &blecfg, ram_start);
VERIFY_SUCCESS ( err_code );
// Event Length + HVN queue + WRITE CMD queue setting affecting bandwidth
varclr(&blecfg);
blecfg.conn_cfg.conn_cfg_tag = BLE_CONN_CFG_HIGH_BANDWIDTH;
blecfg.conn_cfg.params.gap_conn_cfg.conn_count = 1;
blecfg.conn_cfg.params.gap_conn_cfg.event_length = BLEGAP_EVENT_LENGTH;
err_code = sd_ble_cfg_set(BLE_CONN_CFG_GAP, &blecfg, ram_start);
VERIFY_SUCCESS ( err_code );
// Enable BLE stack.
err_code = sd_ble_enable(&ram_start);
VERIFY_SUCCESS(err_code);
return err_code;
}
/**
* @brief Function for bootloader main entry.
*/
int main(void)
{
uint32_t err_code;
// SD is already Initialized in case of BOOTLOADER_DFU_OTA_MAGIC
bool sd_inited = (NRF_POWER->GPREGRET == BOOTLOADER_DFU_OTA_MAGIC);
// Start Bootloader in BLE OTA mode
_ota_update = (NRF_POWER->GPREGRET == BOOTLOADER_DFU_OTA_MAGIC) ||
(NRF_POWER->GPREGRET == BOOTLOADER_DFU_OTA_FULLRESET_MAGIC);
// start bootloader either serial or ble
bool dfu_start = _ota_update || (NRF_POWER->GPREGRET == BOOTLOADER_DFU_SERIAL_MAGIC);
2018-04-04 10:39:26 +00:00
// Clear GPREGRET if it is our values
if (dfu_start) NRF_POWER->GPREGRET = 0;
// Save bootloader version to pre-defined register, retrieved by application
BOOTLOADER_VERSION_REGISTER = (BOOTLOADER_VERSION);
// This check ensures that the defined fields in the bootloader corresponds with actual
// setting in the chip.
APP_ERROR_CHECK_BOOL(*((uint32_t *)NRF_UICR_BOOT_START_ADDRESS) == BOOTLOADER_REGION_START);
APP_ERROR_CHECK_BOOL(NRF_FICR->CODEPAGESIZE == CODE_PAGE_SIZE);
/* Initialize GPIOs
2018-04-04 10:39:26 +00:00
* For metro52 LED_BLUE is muxed with FRESET */
button_pin_init(BOOTLOADER_BUTTON);
button_pin_init(FRESET_BUTTON);
nrf_delay_us(100); // wait for the pin state is stable
led_pin_init(LED_RED);
led_pin_init(LED_BLUE); // on metro52 will override FRESET
2018-04-04 10:39:26 +00:00
// Init scheduler and timer (use scheduler)
APP_SCHED_INIT(SCHED_MAX_EVENT_DATA_SIZE, SCHED_QUEUE_SIZE);
2018-02-15 09:27:51 +00:00
app_timer_init();
2018-04-04 10:39:26 +00:00
/* Initialize a blinky timer to show that we're in bootloader */
(void) app_timer_create(&blinky_timer_id, APP_TIMER_MODE_REPEATED, blinky_handler);
// Init bootloader and SD
(void) bootloader_init();
if (bootloader_dfu_sd_in_progress())
{
err_code = bootloader_dfu_sd_update_continue();
APP_ERROR_CHECK(err_code);
ble_stack_init(!sd_inited);
2018-04-04 13:03:56 +00:00
app_timer_start(blinky_timer_id, APP_TIMER_TICKS(LED_BLINK_INTERVAL), NULL);
err_code = bootloader_dfu_sd_update_finalize();
APP_ERROR_CHECK(err_code);
}
else
{
ble_stack_init(!sd_inited);
2018-04-04 13:03:56 +00:00
app_timer_start(blinky_timer_id, APP_TIMER_TICKS(LED_BLINK_INTERVAL), NULL);
}
// Init usb stack
tusb_init();
2018-04-16 07:03:44 +00:00
// Set usb descriptors
tud_set_descriptors(&usb_desc_init);
2018-04-04 10:39:26 +00:00
/*------------- Determine DFU mode (Serial, OTA, FRESET or normal) -------------*/
/* For metro52 LED_BLUE is muxed with FRESET. We only init FRESET BUTTON
* as needed and reconfigure as LED BLUE when done. */
#ifdef BOARD_METRO52
button_pin_init(FRESET_BUTTON);
nrf_delay_us(100); // wait for the pin state is stable
#endif
// DFU button pressed
dfu_start = dfu_start || button_pressed(BOOTLOADER_BUTTON);
// DFU + FRESET are pressed --> OTA
_ota_update = _ota_update || ( button_pressed(BOOTLOADER_BUTTON) && button_pressed(FRESET_BUTTON) ) ;
#ifdef BOARD_METRO52
led_pin_init(LED_BLUE);
#endif
if (dfu_start || (!bootloader_app_is_valid(DFU_BANK_0_REGION_START)))
{
// Initiate an update of the firmware.
err_code = bootloader_dfu_start(_ota_update, 0);
APP_ERROR_CHECK(err_code);
}
else
{
/* Adafruit Modification
* Even DFU is not active, we still force an 1000 ms dfu serial mode when startup
2018-04-04 10:39:26 +00:00
* to support auto programming from Arduino IDE */
(void) bootloader_dfu_start(false, BOOTLOADER_STARTUP_DFU_INTERVAL);
}
2018-04-04 10:39:26 +00:00
/*------------- Adafruit Factory reset -------------*/
#ifdef BOARD_METRO52
button_pin_init(FRESET_BUTTON);
nrf_delay_us(100); // wait for the pin state is stable
#endif
bool is_freset = ( !button_pressed(BOOTLOADER_BUTTON) && button_pressed(FRESET_BUTTON) );
#ifdef BOARD_METRO52
led_pin_init(LED_BLUE);
#endif
if (is_freset)
{
adafruit_factory_reset();
}
2018-04-04 10:39:26 +00:00
/*------------- Stop timer and jump to application -------------*/
app_timer_stop(blinky_timer_id);
2018-04-20 05:58:17 +00:00
led_off(LED_BLUE);
led_off(LED_RED);
if (bootloader_app_is_valid(DFU_BANK_0_REGION_START) && !bootloader_dfu_sd_in_progress())
{
// Stop RTC1
NVIC_DisableIRQ(RTC1_IRQn);
NRF_RTC1->EVTENCLR = RTC_EVTEN_COMPARE0_Msk;
NRF_RTC1->INTENCLR = RTC_INTENSET_COMPARE0_Msk;
NRF_RTC1->TASKS_STOP = 1;
NRF_RTC1->TASKS_CLEAR = 1;
// Stop USB
if ( NRF_USBD->ENABLE )
{
// Abort all transfers
// Disable pull up
nrf_usbd_pullup_disable();
// Disable Interrupt
NVIC_DisableIRQ(USBD_IRQn);
// disable all interrupt
NRF_USBD->INTENCLR = NRF_USBD->INTEN;
nrf_usbd_disable();
sd_clock_hfclk_release();
sd_power_usbdetected_enable(false);
sd_power_usbpwrrdy_enable(false);
sd_power_usbremoved_enable(false);
}
// Select a bank region to use as application region.
// @note: Only applications running from DFU_BANK_0_REGION_START is supported.
bootloader_app_start(DFU_BANK_0_REGION_START);
}
NVIC_SystemReset();
}
2018-04-05 11:35:30 +00:00
/*------------------------------------------------------------------*/
/* FACTORY RESET
*------------------------------------------------------------------*/
/**
* Pstorage callback, fired after erased Application Data
*/
static void appdata_pstorage_cb(pstorage_handle_t * p_handle, uint8_t op_code, uint32_t result,
uint8_t * p_data, uint32_t data_len)
{
if ( op_code == PSTORAGE_CLEAR_OP_CODE)
{
_freset_erased_complete = true;
}
}
void freset_erase_and_wait(pstorage_handle_t* hdl, uint32_t addr, uint32_t size)
{
_freset_erased_complete = false;
// set address and start erasing
hdl->block_id = addr;
pstorage_clear(hdl, size);
// Time to erase a page is 100 ms max
// It is better to force a timeout to prevent lock-up
uint32_t timeout_tck = (size/CODE_PAGE_SIZE)*100;
2018-02-15 09:27:51 +00:00
timeout_tck = APP_TIMER_TICKS(timeout_tck);
2018-02-15 09:27:51 +00:00
uint32_t start_tck = app_timer_cnt_get();
while(!_freset_erased_complete)
{
sd_app_evt_wait();
app_sched_execute();
2018-02-15 09:27:51 +00:00
uint32_t now_tck = app_timer_cnt_get();
if ( (now_tck - start_tck) > timeout_tck ) break;
}
}
/**
* Perform factory reset to erase Application + Data
*/
void adafruit_factory_reset(void)
{
// Blink fast RED and turn on BLUE when erasing
blinky_fast_set(true);
led_on(LED_BLUE);
static pstorage_handle_t freset_handle = { .block_id = APPDATA_ADDR_START } ;
pstorage_module_param_t storage_params = { .cb = appdata_pstorage_cb};
pstorage_register(&storage_params, &freset_handle);
// clear all App Data
freset_erase_and_wait(&freset_handle, APPDATA_ADDR_START, DFU_APP_DATA_RESERVED);
// Only need to erase the 1st page of Application code to make it invalid
freset_erase_and_wait(&freset_handle, DFU_BANK_0_REGION_START, CODE_PAGE_SIZE);
// back to normal
blinky_fast_set(false);
led_off(LED_BLUE);
}
2018-04-02 06:11:21 +00:00
2018-04-05 11:35:30 +00:00
//--------------------------------------------------------------------+
// Error Handler
//--------------------------------------------------------------------+
2018-04-02 06:11:21 +00:00
void app_error_fault_handler(uint32_t id, uint32_t pc, uint32_t info)
{
2018-04-14 05:15:50 +00:00
verify_breakpoint();
2018-04-02 06:11:21 +00:00
NVIC_SystemReset();
}
2018-04-04 10:39:26 +00:00
void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
{
app_error_handler(0xDEADBEEF, line_num, p_file_name);
}
2018-04-02 06:11:21 +00:00
//--------------------------------------------------------------------+
// tinyusb callbacks
//--------------------------------------------------------------------+
void tud_mount_cb(uint8_t port)
{
}
void tud_umount_cb(uint8_t port)
{
}
uint32_t tusb_hal_millis(void)
{
return ( ( ((uint64_t)app_timer_cnt_get())*1000*(APP_TIMER_CONFIG_RTC_FREQUENCY+1)) / APP_TIMER_CLOCK_FREQ );
}
void ada_ble_hanlder(ble_evt_t* evt)
{
// from dfu_transport_ble
extern void ble_evt_dispatch(ble_evt_t * p_ble_evt);
ble_evt_dispatch(evt);
}
2018-04-14 05:15:50 +00:00
/*------------------------------------------------------------------*/
/* SoftDevice Event handler
*------------------------------------------------------------------*/
uint32_t proc_ble(void)
{
__ALIGN(4) uint8_t ev_buf[ BLE_EVT_LEN_MAX(BLEGATT_ATT_MTU_MAX) ];
2018-04-14 05:15:50 +00:00
uint16_t ev_len = BLE_EVT_LEN_MAX(BLEGATT_ATT_MTU_MAX);
2018-04-14 05:15:50 +00:00
// Get BLE Event
uint32_t err = sd_ble_evt_get(ev_buf, &ev_len);
2018-04-14 05:15:50 +00:00
// Handle valid event, ignore error
if( NRF_SUCCESS == err)
{
2018-04-14 05:15:50 +00:00
ada_ble_hanlder( (ble_evt_t*) ev_buf );
}
return err;
}
2018-04-14 05:15:50 +00:00
uint32_t proc_soc(void)
{
uint32_t soc_evt;
uint32_t err = sd_evt_get(&soc_evt);
2018-04-14 05:15:50 +00:00
if (NRF_SUCCESS == err)
{
// from hal_nrf5x.c
extern void power_usb_event_handler(uint32_t evt);
pstorage_sys_event_handler(soc_evt);
power_usb_event_handler(soc_evt);
}
2018-04-14 05:15:50 +00:00
return err;
}
2018-04-14 05:15:50 +00:00
void ada_sd_task(void* evt_data, uint16_t evt_size)
{
(void) evt_data;
(void) evt_size;
2018-04-14 05:15:50 +00:00
// process BLE and SOC until there is no more events
while( (NRF_ERROR_NOT_FOUND != proc_ble()) || (NRF_ERROR_NOT_FOUND != proc_soc()) )
{
2018-04-04 13:03:56 +00:00
}
}
2018-04-14 05:15:50 +00:00
void SD_EVT_IRQHandler(void)
{
// Use App Scheduler to defer handling code in non-isr context
app_sched_event_put(NULL, 0, ada_sd_task);
}