xobs/fomu-flash
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge pull request #3 from tari/hardware-spi

Browse Source 
Document the requirement for hardware SPI
This commit is contained in:
Sean Cross 2019-02-25 17:11:10 +08:00 committed by GitHub
commit fb21ad75e2
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 4 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
README.md
View File

@ -16,7 +16,10 @@ The EVT boards can be attached directly to the Raspberry Pi as a "hat". When bu
The only pins that are required are 5V, GND, CRESET, SPI_MOSI, SPI_MISO, SPI_CLK, and SPI_CS. The only pins that are required are 5V, GND, CRESET, SPI_MOSI, SPI_MISO, SPI_CLK, and SPI_CS.
You can improve performance by attaching SPI_IO2 and SPI_IO3 and running `fomu-flash` in quad/qpi mode by specifying `-t 4` or `-t q`. The Pi's hardware SPI interface must be enabled in the kernel- use
`raspi-config` or add `dtparam=spi=on` to `/boot/config.txt` and reboot before
using. You can improve performance by attaching SPI_IO2 and SPI_IO3 and running
`fomu-flash` in quad/qpi mode by specifying `-t 4` or `-t q`.
You can get serial interaction by connecting the UART pins, but they are not necessary for flashing. You can get serial interaction by connecting the UART pins, but they are not necessary for flashing.