You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
circuitpython/py/circuitpy_mpconfig.mk

312 lines
8.4 KiB

#
# This file is part of the MicroPython project, http://micropython.org/
#
# The MIT License (MIT)
#
# Copyright (c) 2019 Dan Halbert for Adafruit Industries
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
# mpconfigboard.mk files can specify:
# CIRCUITPY_FULL_BUILD = 1 (which is the default)
# or
# CIRCUITPY_SMALL_BUILD = 1
# which is the same as:
# CIRCUITPY_FULL_BUILD = 0
ifndef CIRCUITPY_FULL_BUILD
ifeq ($(CIRCUITPY_SMALL_BUILD),1)
CIRCUITPY_FULL_BUILD = 0
CFLAGS += -DCIRCUITPY_FULL_BUILD=0
else
CIRCUITPY_FULL_BUILD = 1
CFLAGS += -DCIRCUITPY_FULL_BUILD=1
endif
endif
# Setting CIRCUITPY_MINIMAL_BUILD = 1 will disable all features
# Use for for early stage or highly restricted ports
ifndef CIRCUITPY_DEFAULT_BUILD
ifeq ($(CIRCUITPY_MINIMAL_BUILD),1)
CIRCUITPY_FULL_BUILD = 0
CIRCUITPY_DEFAULT_BUILD = 0
else
CIRCUITPY_DEFAULT_BUILD = 1
endif
endif
# Some features have no unique HAL component, and thus there's never
# a reason to not include them.
ifndef CIRCUITPY_ALWAYS_BUILD
CIRCUITPY_ALWAYS_BUILD = 1
endif
# All builtin modules are listed below, with default values (0 for off, 1 for on)
# Some are always on, some are always off, and some depend on CIRCUITPY_FULL_BUILD.
#
# *** You can override any of the defaults by defining them in your mpconfigboard.mk.
ifndef CIRCUITPY_ANALOGIO
CIRCUITPY_ANALOGIO = $(CIRCUITPY_DEFAULT_BUILD)
endif
CFLAGS += -DCIRCUITPY_ANALOGIO=$(CIRCUITPY_ANALOGIO)
ifndef CIRCUITPY_AUDIOBUSIO
CIRCUITPY_AUDIOBUSIO = $(CIRCUITPY_FULL_BUILD)
endif
CFLAGS += -DCIRCUITPY_AUDIOBUSIO=$(CIRCUITPY_AUDIOBUSIO)
ifndef CIRCUITPY_AUDIOIO
CIRCUITPY_AUDIOIO = $(CIRCUITPY_FULL_BUILD)
endif
CFLAGS += -DCIRCUITPY_AUDIOIO=$(CIRCUITPY_AUDIOIO)
ifndef CIRCUITPY_AUDIOIO_COMPAT
CIRCUITPY_AUDIOIO_COMPAT = $(CIRCUITPY_AUDIOIO)
endif
CFLAGS += -DCIRCUITPY_AUDIOIO_COMPAT=$(CIRCUITPY_AUDIOIO_COMPAT)
ifndef CIRCUITPY_AUDIOPWMIO
CIRCUITPY_AUDIOPWMIO = 0
endif
CFLAGS += -DCIRCUITPY_AUDIOPWMIO=$(CIRCUITPY_AUDIOPWMIO)
ifndef CIRCUITPY_AUDIOCORE
ifeq ($(CIRCUITPY_AUDIOPWMIO),1)
CIRCUITPY_AUDIOCORE = $(CIRCUITPY_AUDIOPWMIO)
else
CIRCUITPY_AUDIOCORE = $(CIRCUITPY_AUDIOIO)
endif
endif
CFLAGS += -DCIRCUITPY_AUDIOCORE=$(CIRCUITPY_AUDIOCORE)
ifndef CIRCUITPY_AUDIOMIXER
CIRCUITPY_AUDIOMIXER = $(CIRCUITPY_AUDIOIO)
endif
CFLAGS += -DCIRCUITPY_AUDIOMIXER=$(CIRCUITPY_AUDIOMIXER)
ifndef CIRCUITPY_AUDIOMP3
ifeq ($(CIRCUITPY_FULL_BUILD),1)
CIRCUITPY_AUDIOMP3 = $(CIRCUITPY_AUDIOCORE)
else
CIRCUITPY_AUDIOMP3 = 0
endif
endif
CFLAGS += -DCIRCUITPY_AUDIOMP3=$(CIRCUITPY_AUDIOMP3)
ifndef CIRCUITPY_BITBANGIO
CIRCUITPY_BITBANGIO = $(CIRCUITPY_FULL_BUILD)
endif
CFLAGS += -DCIRCUITPY_BITBANGIO=$(CIRCUITPY_BITBANGIO)
# Explicitly enabled for boards that support _bleio.
ifndef CIRCUITPY_BLEIO
CIRCUITPY_BLEIO = 0
endif
CFLAGS += -DCIRCUITPY_BLEIO=$(CIRCUITPY_BLEIO)
ifndef CIRCUITPY_BOARD
CIRCUITPY_BOARD = $(CIRCUITPY_DEFAULT_BUILD)
endif
CFLAGS += -DCIRCUITPY_BOARD=$(CIRCUITPY_BOARD)
ifndef CIRCUITPY_BUSIO
CIRCUITPY_BUSIO = $(CIRCUITPY_DEFAULT_BUILD)
endif
CFLAGS += -DCIRCUITPY_BUSIO=$(CIRCUITPY_BUSIO)
ifndef CIRCUITPY_DIGITALIO
CIRCUITPY_DIGITALIO = $(CIRCUITPY_DEFAULT_BUILD)
endif
CFLAGS += -DCIRCUITPY_DIGITALIO=$(CIRCUITPY_DIGITALIO)
ifndef CIRCUITPY_DISPLAYIO
CIRCUITPY_DISPLAYIO = $(CIRCUITPY_FULL_BUILD)
endif
CFLAGS += -DCIRCUITPY_DISPLAYIO=$(CIRCUITPY_DISPLAYIO)
ifndef CIRCUITPY_FREQUENCYIO
CIRCUITPY_FREQUENCYIO = $(CIRCUITPY_FULL_BUILD)
endif
CFLAGS += -DCIRCUITPY_FREQUENCYIO=$(CIRCUITPY_FREQUENCYIO)
ifndef CIRCUITPY_GAMEPAD
CIRCUITPY_GAMEPAD = $(CIRCUITPY_FULL_BUILD)
endif
CFLAGS += -DCIRCUITPY_GAMEPAD=$(CIRCUITPY_GAMEPAD)
ifndef CIRCUITPY_GAMEPADSHIFT
CIRCUITPY_GAMEPADSHIFT = 0
endif
CFLAGS += -DCIRCUITPY_GAMEPADSHIFT=$(CIRCUITPY_GAMEPADSHIFT)
ifndef CIRCUITPY_I2CSLAVE
CIRCUITPY_I2CSLAVE = $(CIRCUITPY_FULL_BUILD)
endif
CFLAGS += -DCIRCUITPY_I2CSLAVE=$(CIRCUITPY_I2CSLAVE)
ifndef CIRCUITPY_MATH
CIRCUITPY_MATH = $(CIRCUITPY_ALWAYS_BUILD)
endif
CFLAGS += -DCIRCUITPY_MATH=$(CIRCUITPY_MATH)
ifndef CIRCUITPY_MICROCONTROLLER
CIRCUITPY_MICROCONTROLLER = $(CIRCUITPY_DEFAULT_BUILD)
endif
CFLAGS += -DCIRCUITPY_MICROCONTROLLER=$(CIRCUITPY_MICROCONTROLLER)
ifndef CIRCUITPY_NEOPIXEL_WRITE
CIRCUITPY_NEOPIXEL_WRITE = $(CIRCUITPY_DEFAULT_BUILD)
endif
CFLAGS += -DCIRCUITPY_NEOPIXEL_WRITE=$(CIRCUITPY_NEOPIXEL_WRITE)
# Enabled on SAMD51. Won't fit on SAMD21 builds. Not tested on nRF or STM32F4 builds.
ifndef CIRCUITPY_NETWORK
CIRCUITPY_NETWORK = 0
endif
CFLAGS += -DCIRCUITPY_NETWORK=$(CIRCUITPY_NETWORK)
ifndef CIRCUITPY_NVM
CIRCUITPY_NVM = $(CIRCUITPY_DEFAULT_BUILD)
endif
CFLAGS += -DCIRCUITPY_NVM=$(CIRCUITPY_NVM)
ifndef CIRCUITPY_OS
CIRCUITPY_OS = $(CIRCUITPY_DEFAULT_BUILD)
endif
CFLAGS += -DCIRCUITPY_OS=$(CIRCUITPY_OS)
ifndef CIRCUITPY_PIXELBUF
CIRCUITPY_PIXELBUF = $(CIRCUITPY_FULL_BUILD)
endif
CFLAGS += -DCIRCUITPY_PIXELBUF=$(CIRCUITPY_PIXELBUF)
ifndef CIRCUITPY_PULSEIO
CIRCUITPY_PULSEIO = $(CIRCUITPY_DEFAULT_BUILD)
endif
CFLAGS += -DCIRCUITPY_PULSEIO=$(CIRCUITPY_PULSEIO)
# Only for SAMD boards for the moment
ifndef CIRCUITPY_PS2IO
CIRCUITPY_PS2IO = 0
endif
CFLAGS += -DCIRCUITPY_PS2IO=$(CIRCUITPY_PS2IO)
ifndef CIRCUITPY_RANDOM
CIRCUITPY_RANDOM = $(CIRCUITPY_DEFAULT_BUILD)
endif
CFLAGS += -DCIRCUITPY_RANDOM=$(CIRCUITPY_RANDOM)
ifndef CIRCUITPY_ROTARYIO
CIRCUITPY_ROTARYIO = $(CIRCUITPY_DEFAULT_BUILD)
endif
CFLAGS += -DCIRCUITPY_ROTARYIO=$(CIRCUITPY_ROTARYIO)
ifndef CIRCUITPY_RTC
CIRCUITPY_RTC = $(CIRCUITPY_DEFAULT_BUILD)
endif
CFLAGS += -DCIRCUITPY_RTC=$(CIRCUITPY_RTC)
# CIRCUITPY_SAMD is handled in the atmel-samd tree.
# Only for SAMD chips.
# Assume not a SAMD build.
ifndef CIRCUITPY_SAMD
CIRCUITPY_SAMD = 0
endif
CFLAGS += -DCIRCUITPY_SAMD=$(CIRCUITPY_SAMD)
# Currently always off.
ifndef CIRCUITPY_STAGE
CIRCUITPY_STAGE = 0
endif
CFLAGS += -DCIRCUITPY_STAGE=$(CIRCUITPY_STAGE)
ifndef CIRCUITPY_STORAGE
CIRCUITPY_STORAGE = $(CIRCUITPY_DEFAULT_BUILD)
endif
CFLAGS += -DCIRCUITPY_STORAGE=$(CIRCUITPY_STORAGE)
ifndef CIRCUITPY_STRUCT
CIRCUITPY_STRUCT = $(CIRCUITPY_ALWAYS_BUILD)
endif
CFLAGS += -DCIRCUITPY_STRUCT=$(CIRCUITPY_STRUCT)
ifndef CIRCUITPY_SUPERVISOR
CIRCUITPY_SUPERVISOR = $(CIRCUITPY_ALWAYS_BUILD)
endif
CFLAGS += -DCIRCUITPY_SUPERVISOR=$(CIRCUITPY_SUPERVISOR)
ifndef CIRCUITPY_TIME
CIRCUITPY_TIME = $(CIRCUITPY_ALWAYS_BUILD)
endif
CFLAGS += -DCIRCUITPY_TIME=$(CIRCUITPY_TIME)
# touchio might be native or generic. See circuitpy_defns.mk.
ifndef CIRCUITPY_TOUCHIO_USE_NATIVE
CIRCUITPY_TOUCHIO_USE_NATIVE = 0
endif
CFLAGS += -DCIRCUITPY_TOUCHIO_USE_NATIVE=$(CIRCUITPY_TOUCHIO_USE_NATIVE)
ifndef CIRCUITPY_TOUCHIO
CIRCUITPY_TOUCHIO = $(CIRCUITPY_DEFAULT_BUILD)
endif
CFLAGS += -DCIRCUITPY_TOUCHIO=$(CIRCUITPY_TOUCHIO)
# For debugging.
ifndef CIRCUITPY_UHEAP
CIRCUITPY_UHEAP = 0
endif
CFLAGS += -DCIRCUITPY_UHEAP=$(CIRCUITPY_UHEAP)
ifndef CIRCUITPY_USB_HID
CIRCUITPY_USB_HID = $(CIRCUITPY_DEFAULT_BUILD)
endif
CFLAGS += -DCIRCUITPY_USB_HID=$(CIRCUITPY_USB_HID)
ifndef CIRCUITPY_USB_MIDI
CIRCUITPY_USB_MIDI = $(CIRCUITPY_DEFAULT_BUILD)
endif
CFLAGS += -DCIRCUITPY_USB_MIDI=$(CIRCUITPY_USB_MIDI)
ifndef CIRCUITPY_PEW
CIRCUITPY_PEW = 0
endif
CFLAGS += -DCIRCUITPY_PEW=$(CIRCUITPY_PEW)
# For debugging.
ifndef CIRCUITPY_USTACK
CIRCUITPY_USTACK = 0
endif
CFLAGS += -DCIRCUITPY_USTACK=$(CIRCUITPY_USTACK)
ifndef CIRCUITPY_BITBANG_APA102
CIRCUITPY_BITBANG_APA102 = 0
endif
CFLAGS += -DCIRCUITPY_BITBANG_APA102=$(CIRCUITPY_BITBANG_APA102)
# Enabled micropython.native decorator (experimental)
ifndef CIRCUITPY_ENABLE_MPY_NATIVE
CIRCUITPY_ENABLE_MPY_NATIVE = 0
endif
CFLAGS += -DCIRCUITPY_ENABLE_MPY_NATIVE=$(CIRCUITPY_ENABLE_MPY_NATIVE)