You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
circuitpython/ports/nrf/Makefile

372 lines
10 KiB

# Select the board to build for.
ifeq ($(BOARD),)
$(info You must provide a BOARD parameter with 'BOARD=')
$(info Possible values are:)
$(info $(sort $(subst /.,,$(subst boards/,,$(wildcard boards/*/.)))))
$(error BOARD not defined)
else
ifeq ($(wildcard boards/$(BOARD)/.),)
$(error Invalid BOARD specified)
endif
endif
CLI_SD := $(SD)
include boards/$(BOARD)/mpconfigboard.mk
SD_LOWER = $(shell echo $(SD) | tr '[:upper:]' '[:lower:]')
# Build directory with SD if it's different from the default.
BUILD ?= $(if $(CLI_SD),build-$(BOARD)-$(SD_LOWER),build-$(BOARD))
include ../../py/mkenv.mk
-include mpconfigport.mk
ifneq ($(SD), )
include bluetooth/bluetooth_common.mk
endif
FROZEN_MPY_DIR = freeze
# include py core make definitions
include ../../py/py.mk
ifneq ($(MCU_SUB_VARIANT),nrf52840)
USB = FALSE
endif
include $(TOP)/supervisor/supervisor.mk
FATFS_DIR = lib/oofatfs
CROSS_COMPILE = arm-none-eabi-
INC += -I.
INC += -I../..
INC += -I$(BUILD)
INC += -I$(BUILD)/genhdr
INC += -I./../../lib/cmsis/inc
INC += -I./boards/$(BOARD)
INC += -I./modules/ubluepy
INC += -I./modules/ble
INC += -I./nrfx
INC += -I./nrfx/hal
INC += -I./nrfx/mdk
INC += -I./nrfx/drivers/include
INC += -I./bluetooth
INC += -I./peripherals
INC += -I../../lib/mp-readline
INC += -I../../lib/tinyusb/src
INC += -I../../supervisor/shared/usb
NRF_DEFINES += -DCONFIG_GPIO_AS_PINRESET
CFLAGS += -mthumb -mabi=aapcs -fsingle-precision-constant -Wdouble-promotion
CFLAGS += -mtune=cortex-m4 -mcpu=cortex-m4 -mfpu=fpv4-sp-d16 -mfloat-abi=hard
CFLAGS += $(INC) -Wall -Werror -ansi -std=gnu99 -nostdlib $(COPT) $(NRF_DEFINES) $(CFLAGS_MOD)
CFLAGS += -fno-strict-aliasing
CFLAGS += -fstack-usage -fno-builtin -fshort-enums
CFLAGS += -fdata-sections -ffunction-sections
CFLAGS += -D__START=main
LDFLAGS = $(CFLAGS)
LDFLAGS += -Xlinker -Map=$(@:.elf=.map)
LDFLAGS += -mthumb -mabi=aapcs -T $(LD_FILE) -L boards/
LDFLAGS += -Wl,--gc-sections
# TinyUSB defines
CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_NRF5X -DCFG_TUD_CDC_RX_BUFSIZE=1024 -DCFG_TUD_CDC_TX_BUFSIZE=1024 -DCFG_TUD_MSC_BUFSIZE=4096
#Debugging/Optimization
ifeq ($(DEBUG), 1)
#ASMFLAGS += -g -gtabs+
CFLAGS += -O1 -ggdb
LDFLAGS += -O1
else
CFLAGS += -Os -DNDEBUG
LDFLAGS += -Os
endif
LIBM_FILE_NAME = $(shell $(CC) $(CFLAGS) -print-file-name=libm.a)
LIBC_FILE_NAME = $(shell $(CC) $(CFLAGS) -print-file-name=libc.a)
LIBGCC_FILE_NAME = $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
LIBS := -L $(dir $(LIBM_FILE_NAME)) -lm
LIBS += -L $(dir $(LIBC_FILE_NAME)) -lc
LIBS += -L $(dir $(LIBGCC_FILE_NAME)) -lgcc
SRC_NRFX = $(addprefix nrfx/,\
drivers/src/nrfx_power.c \
drivers/src/nrfx_spim.c \
drivers/src/nrfx_timer.c \
drivers/src/nrfx_twim.c \
drivers/src/nrfx_uarte.c \
)
ifdef EXTERNAL_FLASH_DEVICES
ifeq ($(QSPI_FLASH_FILESYSTEM),1)
SRC_NRFX += nrfx/drivers/src/nrfx_qspi.c
endif
endif
SRC_C += \
background.c \
fatfs_port.c \
mphalport.c \
tick.c \
board_busses.c \
boards/$(BOARD)/board.c \
boards/$(BOARD)/pins.c \
device/$(MCU_VARIANT)/startup_$(MCU_SUB_VARIANT).c \
bluetooth/ble_drv.c \
bluetooth/ble_uart.c \
lib/libc/string0.c \
lib/mp-readline/readline.c \
lib/oofatfs/ff.c \
lib/oofatfs/option/ccsbcs.c \
lib/timeutils/timeutils.c \
lib/utils/buffer_helper.c \
lib/utils/context_manager_helpers.c \
lib/utils/interrupt_char.c \
lib/utils/pyexec.c \
lib/utils/stdout_helpers.c \
lib/utils/sys_stdio_mphal.c \
nrfx/hal/nrf_nvmc.c \
nrfx/mdk/system_$(MCU_SUB_VARIANT).c \
peripherals/nrf/cache.c \
peripherals/nrf/clocks.c \
peripherals/nrf/$(MCU_CHIP)/pins.c \
peripherals/nrf/$(MCU_CHIP)/power.c \
peripherals/nrf/timers.c \
supervisor/shared/memory.c
SRC_COMMON_HAL += \
analogio/AnalogIn.c \
analogio/AnalogOut.c \
analogio/__init__.c \
board/__init__.c \
busio/I2C.c \
busio/SPI.c \
busio/UART.c \
busio/__init__.c\
digitalio/DigitalInOut.c \
digitalio/__init__.c \
microcontroller/Pin.c \
microcontroller/Processor.c \
microcontroller/__init__.c \
neopixel_write/__init__.c \
os/__init__.c \
pulseio/PWMOut.c \
pulseio/PulseIn.c \
pulseio/PulseOut.c \
pulseio/__init__.c \
supervisor/Runtime.c \
supervisor/__init__.c \
time/__init__.c \
ifneq ($(SD), )
SRC_COMMON_HAL += \
bleio/__init__.c \
bleio/Adapter.c \
bleio/Characteristic.c \
bleio/Descriptor.c \
bleio/Device.c \
bleio/Scanner.c \
bleio/Service.c \
bleio/UUID.c
endif
# These don't have corresponding files in each port but are still located in
# shared-bindings to make it clear what the contents of the modules are.
SRC_BINDINGS_ENUMS = \
busio/OneWire.c \
digitalio/Direction.c \
digitalio/DriveMode.c \
digitalio/Pull.c \
microcontroller/RunMode.c \
help.c \
math/__init__.c \
util.c
ifneq ($(SD), )
SRC_BINDINGS_ENUMS += \
bleio/Address.c \
bleio/AddressType.c \
bleio/AdvertisementData.c \
bleio/ScanEntry.c \
bleio/UUIDType.c
endif
SRC_SHARED_MODULE = \
os/__init__.c \
random/__init__.c \
struct/__init__.c \
gamepad/__init__.c \
gamepad/GamePad.c \
bitbangio/__init__.c \
bitbangio/I2C.c \
bitbangio/OneWire.c \
bitbangio/SPI.c \
busio/OneWire.c \
storage/__init__.c
# uheap/__init__.c \
ustack/__init__.c
# USB source files for nrf52840
ifeq ($(MCU_SUB_VARIANT),nrf52840)
SRC_C += \
lib/tinyusb/src/portable/nordic/nrf5x/dcd_nrf5x.c \
lib/tinyusb/src/portable/nordic/nrf5x/hal_nrf5x.c
SRC_SHARED_MODULE += \
usb_hid/__init__.c \
usb_hid/Device.c \
endif
SRC_COMMON_HAL_EXPANDED = $(addprefix shared-bindings/, $(SRC_COMMON_HAL)) \
$(addprefix shared-bindings/, $(SRC_BINDINGS_ENUMS)) \
$(addprefix common-hal/, $(SRC_COMMON_HAL))
SRC_SHARED_MODULE_EXPANDED = $(addprefix shared-bindings/, $(SRC_SHARED_MODULE)) \
$(addprefix shared-module/, $(SRC_SHARED_MODULE))
SRC_S = supervisor/cpu.s
FROZEN_MPY_PY_FILES := $(shell find -L $(FROZEN_MPY_DIR) -type f -name '*.py')
FROZEN_MPY_MPY_FILES := $(addprefix $(BUILD)/,$(FROZEN_MPY_PY_FILES:.py=.mpy))
OBJ += $(PY_O) $(SUPERVISOR_O) $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_NRFX:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(DRIVERS_SRC_C:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_COMMON_HAL_EXPANDED:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_SHARED_MODULE_EXPANDED:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_S:.s=.o))
$(BUILD)/$(FATFS_DIR)/ff.o: COPT += -Os
$(filter $(PY_BUILD)/../extmod/vfs_fat_%.o, $(PY_O)): COPT += -Os
.phony: all flash sd binary hex
all: binary hex uf2
OUTPUT_FILENAME = firmware
## Create binary .bin file from the .out file
binary: $(BUILD)/$(OUTPUT_FILENAME).bin
$(BUILD)/$(OUTPUT_FILENAME).bin: $(BUILD)/$(OUTPUT_FILENAME).elf
$(OBJCOPY) -O binary $< $@
## Create binary .hex file from the .out file
hex: $(BUILD)/$(OUTPUT_FILENAME).hex
$(BUILD)/$(OUTPUT_FILENAME).hex: $(BUILD)/$(OUTPUT_FILENAME).elf
$(OBJCOPY) -O ihex $< $@
## Create uf2 file
uf2: $(BUILD)/$(OUTPUT_FILENAME).hex
$(ECHO) "Create $(OUTPUT_FILENAME).uf2"
$(PYTHON2) $(TOP)/tools/uf2/utils/uf2conv.py -f 0xADA52840 -c -o "$(BUILD)/$(OUTPUT_FILENAME).uf2" $^
#####################
# Flash with debugger
#####################
FLASHER ?=
ifeq ($(FLASHER),)
# Also update to bootloader settting to validate application and skip checksum ( app valid = 0x0001, crc = 0x0000 )
flash: $(BUILD)/$(OUTPUT_FILENAME).hex
nrfjprog --program $< --sectorerase -f $(MCU_VARIANT)
nrfjprog --erasepage $(BOOT_SETTING_ADDR) -f $(MCU_VARIANT)
nrfjprog --memwr $(BOOT_SETTING_ADDR) --val 0x00000001 -f $(MCU_VARIANT)
nrfjprog --reset -f $(MCU_VARIANT)
sd: $(BUILD)/$(OUTPUT_FILENAME).hex
nrfjprog --eraseall -f $(MCU_VARIANT)
nrfjprog --program $(SOFTDEV_HEX) -f $(MCU_VARIANT)
nrfjprog --program $< --sectorerase -f $(MCU_VARIANT)
nrfjprog --reset -f $(MCU_VARIANT)
else ifeq ($(FLASHER), pyocd)
flash: $(BUILD)/$(OUTPUT_FILENAME).hex
pyocd-flashtool -t $(MCU_VARIANT) $< --sector_erase
#pyocd-tool -t $(MCU_VARIANT) erase $(BOOT_SETTING_ADDR)
pyocd-tool -t $(MCU_VARIANT) write32 $(BOOT_SETTING_ADDR) 0x00000001
pyocd-tool -t $(MCU_VARIANT) reset
sd: $(BUILD)/$(OUTPUT_FILENAME).hex
pyocd-flashtool -t $(MCU_VARIANT) --chip_erase
pyocd-flashtool -t $(MCU_VARIANT) $(SOFTDEV_HEX)
pyocd-flashtool -t $(MCU_VARIANT) $< --sector_erase
pyocd-tool -t $(MCU_VARIANT) reset $(BOOT_SETTING_ADDR)
endif
#####################
# Flash with DFU
#####################
.phony: dfu-gen dfu-flash
NRFUTIL = adafruit-nrfutil
ifeq ($(MCU_SUB_VARIANT),nrf52840)
DFU_TOUCH = --touch 1200
else
DFU_TOUCH =
endif
check_defined = \
$(strip $(foreach 1,$1, \
$(call __check_defined,$1,$(strip $(value 2)))))
__check_defined = \
$(if $(value $1),, \
$(error Undefined make flag: $1$(if $2, ($2))))
## Flash with DFU serial
dfu-flash: $(BUILD)/dfu-package.zip
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyUSB0)
$(NRFUTIL) --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank $(DFU_TOUCH)
## Create DFU package file
dfu-gen: $(BUILD)/dfu-package.zip
$(BUILD)/dfu-package.zip: $(BUILD)/$(OUTPUT_FILENAME).hex
$(NRFUTIL) dfu genpkg --sd-req 0xFFFE --dev-type 0x0052 --application $^ $(BUILD)/dfu-package.zip
# You must have $^ here because it deduplicates entries in $(OBJ)
$(BUILD)/$(OUTPUT_FILENAME).elf: $(OBJ)
$(ECHO) "LINK $@"
$(Q)$(CC) $(LDFLAGS) -o $@ $^ -Wl,--start-group $(LIBS) -Wl,--end-group
$(Q)$(SIZE) $@
# List of sources for qstr extraction
SRC_QSTR += $(SRC_C) $(SRC_SUPERVISOR) $(SRC_MOD) $(DRIVERS_SRC_C) $(SRC_COMMON_HAL_EXPANDED) $(SRC_SHARED_MODULE_EXPANDED)
# Append any auto-generated sources that are needed by sources listed in
# SRC_QSTR
SRC_QSTR_AUTO_DEPS +=
AF_FILE = $(MCU_VARIANT)_af.csv
PREFIX_FILE = boards/$(MCU_VARIANT)_prefix.c
ifneq ($(FROZEN_DIR),)
# To use frozen source modules, put your .py files in a subdirectory (eg scripts/)
# and then invoke make with FROZEN_DIR=scripts (be sure to build from scratch).
CFLAGS += -DMICROPY_MODULE_FROZEN_STR
endif
ifneq ($(FROZEN_MPY_DIR),)
# To use frozen bytecode, put your .py files in a subdirectory (eg frozen/) and
# then invoke make with FROZEN_MPY_DIR=frozen (be sure to build from scratch).
CFLAGS += -DMICROPY_QSTR_EXTRA_POOL=mp_qstr_frozen_const_pool
CFLAGS += -DMICROPY_MODULE_FROZEN_MPY
endif
include $(TOP)/py/mkrules.mk