You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Scott Shawcroft 743bc829ab
Clean up debug changes
3 years ago
bluetooth Refine _bleio 3 years ago
boards Merge pull request #2236 from tannewt/bleio_tweaks 3 years ago
common-hal Clean up debug changes 3 years ago
device/nrf52 nrf: Mark interrupt vectors as used 4 years ago
examples Fix 'advertisement' typo 4 years ago
freeze ports/nrf: Moving nrf51/52 port to new ports directory 5 years ago
nrfx@3d268263be nrf: fix internal flash writes 4 years ago
peripherals/nrf fix default crystal value; fix include order 3 years ago
supervisor Add functions to get top and limit stack 3 years ago
.gitignore add CharacteristicBuffer; UART seems to work! 4 years ago
Makefile nrf: Makefile: sensible flags for debugging 3 years ago boards: add support for Electronut labs Blip 4 years ago
background.c Refine _bleio 3 years ago
background.h Don't let a background task call run_background_tasks() 4 years ago
fatfs_port.c ports/nrf: Moving nrf51/52 port to new ports directory 5 years ago
gccollect.c ports/nrf: Moving nrf51/52 port to new ports directory 5 years ago
mpconfigport.h initial Arduino Nano 33 BLE board definition 3 years ago enable audiomixer on nrf 3 years ago
mphalport.c nrf: Use RUN_BACKGROUND_TASKS 4 years ago
mphalport.h migrate serial from uart to uarte 4 years ago
nrfx_config.h nrf: allocate two I2C on CPB 3 years ago
nrfx_glue.h add ARRAY_SIZE 5 years ago
nrfx_log.h nrf: Rewrite the SPI common-hal using nrfx 5 years ago
qstrdefsport.h nrf: Remove old qstr defines 5 years ago
sd_mutex.c nrf: Use RUN_BACKGROUND_TASKS 4 years ago
sd_mutex.h CharacteristicBuffer: make it be a stream class; add locking 4 years ago
tick.c Add missing files for DigitalIO 4 years ago
tick.h Move atmel-samd to tinyusb and support nRF flash. 4 years ago

CircuitPython Port To The Nordic Semiconductor nRF52 Series

This is a port of CircuitPython to the Nordic Semiconductor nRF52 series of chips.

Supported Features

  • UART
  • SPI
  • LEDs
  • Pins
  • ADC
  • I2C
  • PWM
  • Temperature
  • RTC (Real Time Counter. Low-Power counter)
  • BLE support including:
    • Peripheral role
    • Scanner role
    • REPL over Bluetooth LE (optionally using WebBluetooth)
    • ubluepy: Bluetooth LE module for CircuitPython
    • 1 non-connectable advertiser while in connection

Tested Hardware

Board Specific Instructions

For board-specific instructions on building and flashing CircuitPython, see the following links:

NOTE: These board specific readmes may be more up to date than the generic board-neutral documentation further down.

  • Adafruit Feather nRF52840: boards/feather_nrf52840_express/ 1MB Flash, 256KB SRAM
  • Nordic PCA10056 (uses nRF52840): boards/pca10056/
  • MakerDiary nRF52840 MDK: boards/makerdiary_nrf52840_mdk/
  • MakerDiary nRF52840 MDK USB Dongle: boards/makerdiary_nrf52840_mdk_usb_dongle/

For all other board targets, see the generic notes below.

Compile and Flash

Prerequisite steps for building the nrf port:

git clone <URL>.git circuitpython
cd circuitpython
git submodule update --init
make -C mpy-cross

To build and flash issue the following command inside the ports/nrf/ folder:

make BOARD=pca10056
make BOARD=pca10056 flash

Compile and Flash with Bluetooth Stack

First prepare the bluetooth folder by downloading Bluetooth LE stacks and headers:


If the Bluetooth stacks has been downloaded, compile the target with the following command:

make BOARD=pca10040 SD=s132

The make sd will trigger a flash of the bluetooth stack before that application is flashed. Note that make sd will perform a full erase of the chip, which could cause 3rd party bootloaders to also be wiped.

make BOARD=pca10040 SD=s132 sd

Note: further tuning of features to include in bluetooth or even setting up the device to use REPL over Bluetooth can be configured in the bluetooth_conf.h.

Target Boards and Make Flags

Target Board (BOARD) Bluetooth Stack (SD) Bluetooth Support Flash Util
pca10056 s140 Peripheral and Scanner Segger
feather_nrf52840_express s140 Peripheral and Scanner UF2 bootloader
makerdiary_nrf52840_mdk s140 Peripheral and Scanner pyocd or ARM mbed DAPLink
makerdiary_nrf52840_mdk_usb_dongle s140 Peripheral and Scanner DFU bootloader & nrfutil
electronut_labs_papyr s140 Peripheral and Scanner UF2 bootloader
electronut_labs_blip s140 Peripheral and Scanner Black Magic Probe

Segger Targets

Install the necessary tools to flash and debug using Segger:

JLink Download

nrfjprog linux-32bit Download

nrfjprog linux-64bit Download

nrfjprog osx Download

nrfjprog win32 Download

note: On Linux it might be required to link SEGGER's inside nrfjprog's folder.

DFU Targets

run follow command to install adafruit-nrfutil from PyPi

$ pip3 install --user adafruit-nrfutil

make flash and make sd will not work with DFU targets. Hence, dfu-gen and dfu-flash must be used instead.

  • dfu-gen: Generates a Firmware zip to be used by the DFU flash application.
  • dfu-flash: Triggers the DFU flash application to upload the firmware from the generated Firmware zip file.

Example on how to generate and flash feather_nrf52840 target:

make BOARD=feather_nrf52840 SD=s140
make BOARD=feather_nrf52840 SD=s140 dfu-gen dfu-flash

Bluetooth LE REPL

The port also implements a BLE REPL driver. This feature is disabled by default, as it will deactivate the UART REPL when activated. As some of the nRF devices only have one UART, using the BLE REPL free's the UART instance such that it can be used as a general UART peripheral not bound to REPL.

The configuration can be enabled by editing the bluetooth_conf.h and set MICROPY_PY_BLE_NUS to 1.

When enabled you have different options to test it:


  • nRF UART application for IPhone/Android

WebBluetooth mode can also be configured by editing bluetooth_conf.h and set BLUETOOTH_WEBBLUETOOTH_REPL to 1. This will alternate advertisement between Eddystone URL and regular connectable advertisement. The Eddystone URL will point the phone or PC to download WebBluetooth REPL (experimental), which subsequently can be used to connect to the Bluetooth REPL from the PC or Phone browser.