You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Scott Shawcroft 7b393bc406
Merge tag 'v1.9.3'
5 years ago
..
boards stm32/boards: Fix typos in stm32f767_af.csv table. 5 years ago
modules all: Update Makefiles and others to build with new ports/ dir layout. 5 years ago
usbdev stm32/usbdev: Move all the USB device descriptor state into its struct. 5 years ago
usbhost ports: Make new ports/ sub-directory and move all ports there. 5 years ago
.gitignore ports: Make new ports/ sub-directory and move all ports there. 5 years ago
Makefile Merge tag 'v1.9.3' 5 years ago
README.md all: Update Makefiles and others to build with new ports/ dir layout. 5 years ago
accel.c all: Remove inclusion of internal py header files. 5 years ago
accel.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
adc.c all: Remove inclusion of internal py header files. 5 years ago
adc.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
autoflash ports: Make new ports/ sub-directory and move all ports there. 5 years ago
bufhelper.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
bufhelper.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
can.c all: Remove inclusion of internal py header files. 5 years ago
can.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
dac.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
dac.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
dma.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
dma.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
extint.c stm32: Replace stray tabs with spaces. 5 years ago
extint.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
fatfs_port.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
flash.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
flash.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
font_petme128_8x8.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
gccollect.c all: Remove inclusion of internal py header files. 5 years ago
gccollect.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
gchelper.s ports: Make new ports/ sub-directory and move all ports there. 5 years ago
help.c py/builtinhelp: Change signature of help text var from pointer to array. 5 years ago
i2c.c all: Remove inclusion of internal py header files. 5 years ago
i2c.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
irq.c all: Remove inclusion of internal py header files. 5 years ago
irq.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
lcd.c all: Remove inclusion of internal py header files. 5 years ago
lcd.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
led.c all: Remove inclusion of internal py header files. 5 years ago
led.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
machine_i2c.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
main.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
make-stmconst.py stm32/make-stmconst.py: Make sure mpz const data lives in ROM. 5 years ago
modmachine.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
modmachine.h all: Remove inclusion of internal py header files. 5 years ago
modnetwork.c all: Remove inclusion of internal py header files. 5 years ago
modnetwork.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
modnwcc3k.c stm32/modusocket: Return OSError(-2) if getaddrinfo fails. 5 years ago
modnwwiznet5k.c stm32/modnwwiznet5k: Implement stream ioctl for the Wiznet driver. 5 years ago
modpyb.c stm32: Make uos.dupterm() conform to specs by using extmod version. 5 years ago
modstm.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
moduos.c stm32: Make uos.dupterm() conform to specs by using extmod version. 5 years ago
modusocket.c stm32/modusocket: Return OSError(-2) if getaddrinfo fails. 5 years ago
modutime.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
mpconfigport.h stm32: Make uos.dupterm() conform to specs by using extmod version. 5 years ago
mpconfigport.mk stm32/modnwwiznet5k: Add support for W5500 Ethernet chip. 5 years ago
mphalport.c stm32: Make uos.dupterm() conform to specs by using extmod version. 5 years ago
mphalport.h all: Update Makefiles and others to build with new ports/ dir layout. 5 years ago
mpthreadport.c all: Remove inclusion of internal py header files. 5 years ago
mpthreadport.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
pendsv.c all: Remove inclusion of internal py header files. 5 years ago
pendsv.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
pin.c all: Remove inclusion of internal py header files. 5 years ago
pin.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
pin_defs_stm32.c all: Update Makefiles and others to build with new ports/ dir layout. 5 years ago
pin_defs_stm32.h all: Update Makefiles and others to build with new ports/ dir layout. 5 years ago
pin_named_pins.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
portmodules.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
pybcdc.inf_template ports: Make new ports/ sub-directory and move all ports there. 5 years ago
pybthread.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
pybthread.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
qstrdefsport.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
rng.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
rng.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
rtc.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
rtc.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
sdcard.c all: Remove inclusion of internal py header files. 5 years ago
sdcard.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
servo.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
servo.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
spi.c all: Remove inclusion of internal py header files. 5 years ago
spi.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
startup_stm32.S ports: Make new ports/ sub-directory and move all ports there. 5 years ago
stm32_it.c all: Remove inclusion of internal py header files. 5 years ago
stm32_it.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
storage.c stm32/boards: Add new board B_L475E_IOT01A based on STM32L475. 5 years ago
storage.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
system_stm32.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
systick.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
systick.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
timer.c stm32/timer: Enable ARPE so that timer freq can be changed smoothly. 5 years ago
timer.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
uart.c Merge tag 'v1.9.3' 5 years ago
uart.h stm32/mphalport: Improve efficiency of mp_hal_stdout_tx_strn_cooked. 5 years ago
usb.c Merge tag 'v1.9.3' 5 years ago
usb.h stm32/mphalport: Improve efficiency of mp_hal_stdout_tx_strn_cooked. 5 years ago
usbd_cdc_interface.c stm32/usbd_cdc_interface: Don't reset CDC output buf on initialisation. 5 years ago
usbd_cdc_interface.h stm32/usbd_cdc_interface.h: Fix code comments after recent refactor. 5 years ago
usbd_conf.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
usbd_conf.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
usbd_desc.c stm32/usbdev: Move all the USB device descriptor state into its struct. 5 years ago
usbd_desc.h stm32/usbdev: Move all the USB device descriptor state into its struct. 5 years ago
usbd_hid_interface.c stm32/usbdev: Put all state for the USB device driver in a struct. 5 years ago
usbd_hid_interface.h stm32/usbdev: Put all state for the USB device driver in a struct. 5 years ago
usbd_msc_storage.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
usbd_msc_storage.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
usrsw.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
usrsw.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago
wdt.c ports: Make new ports/ sub-directory and move all ports there. 5 years ago
wdt.h ports: Make new ports/ sub-directory and move all ports there. 5 years ago

README.md

MicroPython port to STM32 MCUs

This directory contains the port of MicroPython to ST's line of STM32Fxxx microcontrollers. It is based on the STM32Cube HAL library and currently supports: STM32F401, STM32F405, STM32F411, STM32F429, STM32F746.

The officially supported boards are the line of pyboards: PYBv1.0 and PYBv1.1 (both with STM32F405), and PYBLITEv1.0 (with STM32F411). See micropython.org/pyboard for further details.

Other boards that are supported include ST Discovery and Nucleo boards. See the boards/ subdirectory, which contains the configuration files used to build each individual board.

Build instructions

Before building the firmware for a given board the MicroPython cross-compiler must be built; it will be used to pre-compile some of the built-in scripts to bytecode. The cross-compiler is built and run on the host machine, using:

$ make -C mpy-cross

This command should be executed from the root directory of this repository. All other commands below should be executed from the ports/stm32/ directory.

An ARM compiler is required for the build, along with the associated binary utilities. The default compiler is arm-none-eabi-gcc, which is available for Arch Linux via the package arm-none-eabi-gcc, for Ubuntu via instructions here, or see here for the main GCC ARM Embedded page. The compiler can be changed using the CROSS_COMPILE variable when invoking make.

To build for a given board, run:

$ make BOARD=PYBV11

The default board is PYBV10 but any of the names of the subdirectories in the boards/ directory can be passed as the argument to BOARD=. The above command should produce binary images in the build-PYBV11/ subdirectory (or the equivalent directory for the board specified).

You must then get your board/microcontroller into DFU mode. On the pyboard connect the 3V3 pin to the P1/DFU pin with a wire (they are next to each other on the bottom left of the board, second row from the bottom) and then reset (by pressing the RST button) or power on the board. Then flash the firmware using the command:

$ make BOARD=PYBV11 deploy

This will use the included tools/pydfu.py script. You can use instead the dfu-util program (available here) by passing USE_PYDFU=0:

$ make BOARD=PYBV11 USE_PYDFU=0 deploy

If flashing the firmware does not work it may be because you don't have the correct permissions. Try then:

$ sudo make BOARD=PYBV11 deploy

Or using dfu-util directly:

$ sudo dfu-util -a 0 -d 0483:df11 -D build-PYBV11/firmware.dfu

ST Discovery or Nucleo boards have a builtin programmer called ST-LINK. With these boards and using Linux or OS X, you have the option to upload the stm32 firmware using the st-flash utility from the stlink project. To do so, connect the board with a mini USB cable to its ST-LINK USB port and then use the make target deploy-stlink. For example, if you have the STM32F4DISCOVERY board, you can run:

$ make BOARD=STM32F4DISC deploy-stlink

The st-flash program should detect the USB connection to the board automatically. If not, run lsusb to determine its USB bus and device number and set the STLINK_DEVICE environment variable accordingly, using the format <USB_BUS>:<USB_ADDR>. Example:

$ lsusb
[...]
Bus 002 Device 035: ID 0483:3748 STMicroelectronics ST-LINK/V2
$ export STLINK_DEVICE="002:0035"
$ make BOARD=STM32F4DISC deploy-stlink

Flashing the Firmware with OpenOCD

Another option to deploy the firmware on ST Discovery or Nucleo boards with a ST-LINK interface uses OpenOCD. Connect the board with a mini USB cable to its ST-LINK USB port and then use the make target deploy-openocd. For example, if you have the STM32F4DISCOVERY board:

$ make BOARD=STM32F4DISC deploy-openocd

The openocd program, which writes the firmware to the target board's flash, is configured via the file ports/stm32/boards/openocd_stm32f4.cfg. This configuration should work for all boards based on a STM32F4xx MCU with a ST-LINKv2 interface. You can override the path to this configuration by setting OPENOCD_CONFIG in your Makefile or on the command line.

Accessing the board

Once built and deployed, access the MicroPython REPL (the Python prompt) via USB serial or UART, depending on the board. For the pyboard you can try:

$ picocom /dev/ttyACM0