removed Robo HAT MM1 M0 board.

crypto-aes
wallarug 3 years ago
parent 41fb6e7824
commit fce7b89087
  1. 38
      ports/atmel-samd/boards/robohatmm1_m0/board.c
  2. 42
      ports/atmel-samd/boards/robohatmm1_m0/mpconfigboard.h
  3. 29
      ports/atmel-samd/boards/robohatmm1_m0/mpconfigboard.mk
  4. 92
      ports/atmel-samd/boards/robohatmm1_m0/pins.c

@ -1,38 +0,0 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "boards/board.h"
void board_init(void)
{
}
bool board_requests_safe_mode(void) {
return false;
}
void reset_board(void) {
}

@ -1,42 +0,0 @@
#define MICROPY_HW_BOARD_NAME "Robo HAT MM1 M0"
#define MICROPY_HW_MCU_NAME "samd21g18"
#define MICROPY_HW_LED_STATUS (&pin_PB22)
// Salae reads 12mhz which is the limit even though we set it to the safer 8mhz.
#define SPI_FLASH_BAUDRATE (8000000)
// On-board flash
#define SPI_FLASH_MOSI_PIN &pin_PA12
#define SPI_FLASH_MISO_PIN &pin_PA14
#define SPI_FLASH_SCK_PIN &pin_PA13
#define SPI_FLASH_CS_PIN &pin_PA15
// These are pins not to reset.
#define MICROPY_PORT_A ( 0 ) //PORT_PA06
#define MICROPY_PORT_B ( 0 )
#define MICROPY_PORT_C ( 0 )
// If you change this, then make sure to update the linker scripts as well to
// make sure you don't overwrite code.
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
#define CALIBRATE_CRYSTALLESS 1
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
#define DEFAULT_I2C_BUS_SDA (&pin_PA22)
#define DEFAULT_SPI_BUS_SCK (&pin_PB09)
#define DEFAULT_SPI_BUS_MOSI (&pin_PB08)
#define DEFAULT_SPI_BUS_MISO (&pin_PB11)
//#define DEFAULT_UART_BUS_RX (&pin_PB03)
//#define DEFAULT_UART_BUS_TX (&pin_PB02)
// USB is always used internally so skip the pin objects for it.
#define IGNORE_PIN_PA24 1
#define IGNORE_PIN_PA25 1

@ -1,29 +0,0 @@
LD_FILE = boards/samd21x18-bootloader-external-flash-crystalless.ld
USB_VID = 0x1209
USB_PID = 0x4D43
USB_PRODUCT = "Robo HAT MM1 M0"
USB_MANUFACTURER = "Robotics Masters"
CHIP_VARIANT = SAMD21G18A
CHIP_FAMILY = samd21
SPI_FLASH_FILESYSTEM = 1
EXTERNAL_FLASH_DEVICE_COUNT = 1
EXTERNAL_FLASH_DEVICES = "W25Q64JV_IQ"
LONGINT_IMPL = MPZ
# Non-Flash Edition
#INTERNAL_FLASH_FILESYSTEM = 1
#LONGINT_IMPL = NONE
CIRCUITPY_DISPLAYIO = 0
CIRCUITPY_FREQUENCYIO = 0
CFLAGS_INLINE_LIMIT = 60
SUPEROPT_GC = 0
# Include these Python libraries in firmware.
#FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
#FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_INA219
#FROZEN_MPY_DIRS += $(TOP)/frozen/RoboticsMasters_CircuitPython_MPU9250

@ -1,92 +0,0 @@
#include "shared-bindings/board/__init__.h"
// Version 2.4
STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
// SERVO Pins
{ MP_ROM_QSTR(MP_QSTR_SERVO1), MP_ROM_PTR(&pin_PA18) },
{ MP_ROM_QSTR(MP_QSTR_SERVO2), MP_ROM_PTR(&pin_PA19) },
{ MP_ROM_QSTR(MP_QSTR_SERVO3), MP_ROM_PTR(&pin_PA20) },
{ MP_ROM_QSTR(MP_QSTR_SERVO4), MP_ROM_PTR(&pin_PA21) },
{ MP_ROM_QSTR(MP_QSTR_SERVO5), MP_ROM_PTR(&pin_PA11) },
{ MP_ROM_QSTR(MP_QSTR_SERVO6), MP_ROM_PTR(&pin_PA10) },
{ MP_ROM_QSTR(MP_QSTR_SERVO7), MP_ROM_PTR(&pin_PA09) },
{ MP_ROM_QSTR(MP_QSTR_SERVO8), MP_ROM_PTR(&pin_PA08) },
// RCC Pins
{ MP_ROM_QSTR(MP_QSTR_RCC1), MP_ROM_PTR(&pin_PA07) },
{ MP_ROM_QSTR(MP_QSTR_RCC2), MP_ROM_PTR(&pin_PA06) },
{ MP_ROM_QSTR(MP_QSTR_RCC3), MP_ROM_PTR(&pin_PA05) },
{ MP_ROM_QSTR(MP_QSTR_RCC4), MP_ROM_PTR(&pin_PA04) },
// Special Function
{ MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_PA02) },
{ MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_PA02) },
{ MP_ROM_QSTR(MP_QSTR_POWER_OFF), MP_ROM_PTR(&pin_PA03) },
{ MP_ROM_QSTR(MP_QSTR_POWER_DISABLE), MP_ROM_PTR(&pin_PA03) },
{ MP_ROM_QSTR(MP_QSTR_POWER_ON), MP_ROM_PTR(&pin_PA27) },
{ MP_ROM_QSTR(MP_QSTR_POWER_ENABLE), MP_ROM_PTR(&pin_PA27) },
{ MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_PA27) },
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PB23) },
{ MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_PB22) },
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PB02) },
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PB03) },
// GROVE on SERCOM0
{ MP_ROM_QSTR(MP_QSTR_GROVE_SCL), MP_ROM_PTR(&pin_PA09) },
{ MP_ROM_QSTR(MP_QSTR_GROVE_SDA), MP_ROM_PTR(&pin_PA08) },
{ MP_ROM_QSTR(MP_QSTR_GROVE_RX), MP_ROM_PTR(&pin_PA09) },
{ MP_ROM_QSTR(MP_QSTR_GROVE_TX), MP_ROM_PTR(&pin_PA08) },
{ MP_ROM_QSTR(MP_QSTR_GROVE_D1), MP_ROM_PTR(&pin_PA09) },
{ MP_ROM_QSTR(MP_QSTR_GROVE_D0), MP_ROM_PTR(&pin_PA08) },
{ MP_ROM_QSTR(MP_QSTR_GROVE_A1), MP_ROM_PTR(&pin_PA09) },
{ MP_ROM_QSTR(MP_QSTR_GROVE_A0), MP_ROM_PTR(&pin_PA08) },
// UART on SERCOM0
{ MP_ROM_QSTR(MP_QSTR_UART_TX), MP_ROM_PTR(&pin_PA04) },
{ MP_ROM_QSTR(MP_QSTR_UART_RX), MP_ROM_PTR(&pin_PA05) },
{ MP_ROM_QSTR(MP_QSTR_UART_CTS), MP_ROM_PTR(&pin_PA06) },
{ MP_ROM_QSTR(MP_QSTR_UART_RTS), MP_ROM_PTR(&pin_PA07) },
// UART on SERCOM1 (Raspberry Pi)
{ MP_ROM_QSTR(MP_QSTR_TX1), MP_ROM_PTR(&pin_PA16) },
{ MP_ROM_QSTR(MP_QSTR_RX1), MP_ROM_PTR(&pin_PA17) },
{ MP_ROM_QSTR(MP_QSTR_PI_RX), MP_ROM_PTR(&pin_PA16) },
{ MP_ROM_QSTR(MP_QSTR_PI_TX), MP_ROM_PTR(&pin_PA17) },
// I2C on SERCOM1 (External Connector)
{ MP_ROM_QSTR(MP_QSTR_SDA1), MP_ROM_PTR(&pin_PA00) },
{ MP_ROM_QSTR(MP_QSTR_SCL1), MP_ROM_PTR(&pin_PA01) },
// SPI Flash on SERCOM2
{ MP_ROM_QSTR(MP_QSTR_FLASH_SCK), MP_ROM_PTR(&pin_PA13) },
{ MP_ROM_QSTR(MP_QSTR_FLASH_MISO), MP_ROM_PTR(&pin_PA14) },
{ MP_ROM_QSTR(MP_QSTR_FLASH_MOSI), MP_ROM_PTR(&pin_PA12) },
{ MP_ROM_QSTR(MP_QSTR_FLASH_CS), MP_ROM_PTR(&pin_PA15) },
// I2C on SERCOM3 (RPi & Internal)
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA22) },
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA23) },
{ MP_ROM_QSTR(MP_QSTR_PI_SDA), MP_ROM_PTR(&pin_PA22) },
{ MP_ROM_QSTR(MP_QSTR_PI_SCL), MP_ROM_PTR(&pin_PA23) },
// SPI on SERCOM4
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PB08) },
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PB09) },
{ MP_ROM_QSTR(MP_QSTR_SS), MP_ROM_PTR(&pin_PB10) },
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB11) },
// GPS on SERCOM5
{ MP_ROM_QSTR(MP_QSTR_GPS_TX), MP_ROM_PTR(&pin_PB02) },
{ MP_ROM_QSTR(MP_QSTR_GPS_RX), MP_ROM_PTR(&pin_PB03) },
// Raspberry Pi
{ MP_ROM_QSTR(MP_QSTR_PI_GP25), MP_ROM_PTR(&pin_PA30) },
{ MP_ROM_QSTR(MP_QSTR_SWCLK), MP_ROM_PTR(&pin_PA30) },
{ MP_ROM_QSTR(MP_QSTR_PI_GP24), MP_ROM_PTR(&pin_PA31) },
{ MP_ROM_QSTR(MP_QSTR_SWDIO), MP_ROM_PTR(&pin_PA31) },
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
//{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
};
MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);
Loading…
Cancel
Save