Add never_reset and reset to pin common hal, adjust files

crypto-aes
Hierophect 3 years ago
parent f3038e53d1
commit de5691acf5
  1. 8
      ports/atmel-samd/common-hal/microcontroller/Pin.c
  2. 8
      ports/nrf/common-hal/microcontroller/Pin.c
  3. 8
      ports/stm32f4/common-hal/microcontroller/Pin.c
  4. 2
      shared-bindings/microcontroller/Pin.h
  5. 2
      shared-module/displayio/Display.c
  6. 2
      shared-module/displayio/EPaperDisplay.c
  7. 13
      shared-module/displayio/FourWire.c
  8. 5
      shared-module/displayio/I2CDisplay.c
  9. 8
      supervisor/shared/rgb_led_status.c

@ -158,6 +158,14 @@ void reset_pin_number(uint8_t pin_number) {
#endif
}
void common_hal_never_reset_pin(const mcu_pin_obj_t* pin) {
never_reset_pin_number(pin->number);
}
void common_hal_reset_pin(const mcu_pin_obj_t* pin) {
reset_pin_number(pin->number);
}
void claim_pin(const mcu_pin_obj_t* pin) {
#ifdef MICROPY_HW_NEOPIXEL
if (pin == MICROPY_HW_NEOPIXEL) {

@ -125,6 +125,14 @@ void never_reset_pin_number(uint8_t pin_number) {
never_reset_pins[nrf_pin_port(pin_number)] |= 1 << nrf_relative_pin_number(pin_number);
}
void common_hal_never_reset_pin(const mcu_pin_obj_t* pin) {
never_reset_pin_number(pin->number);
}
void common_hal_reset_pin(const mcu_pin_obj_t* pin) {
reset_pin_number(pin->number);
}
void claim_pin(const mcu_pin_obj_t* pin) {
// Set bit in claimed_pins bitmask.
claimed_pins[nrf_pin_port(pin->number)] |= 1 << nrf_relative_pin_number(pin->number);

@ -72,6 +72,14 @@ void never_reset_pin_number(uint8_t pin_port, uint8_t pin_number) {
never_reset_pins[pin_port] |= 1<<pin_number;
}
void common_hal_never_reset_pin(const mcu_pin_obj_t* pin) {
never_reset_pin_number(pin->port, pin->number);
}
void common_hal_reset_pin(const mcu_pin_obj_t* pin) {
reset_pin_number(pin->port, pin->number);
}
void claim_pin(const mcu_pin_obj_t* pin) {
// Set bit in claimed_pins bitmask.
claimed_pins[pin->port] |= 1<<pin->number;

@ -37,5 +37,7 @@ void assert_pin(mp_obj_t obj, bool none_ok);
void assert_pin_free(const mcu_pin_obj_t* pin);
bool common_hal_mcu_pin_is_free(const mcu_pin_obj_t* pin);
void common_hal_never_reset_pin(const mcu_pin_obj_t* pin);
void common_hal_reset_pin(const mcu_pin_obj_t* pin);
#endif // MICROPY_INCLUDED_SHARED_BINDINGS_MICROCONTROLLER_PIN_H

@ -113,7 +113,7 @@ void common_hal_displayio_display_construct(displayio_display_obj_t* self,
if (result != PWMOUT_OK) {
self->backlight_inout.base.type = &digitalio_digitalinout_type;
common_hal_digitalio_digitalinout_construct(&self->backlight_inout, backlight_pin);
never_reset_pin_number(backlight_pin->number);
common_hal_never_reset_pin(backlight_pin);
} else {
self->backlight_pwm.base.type = &pulseio_pwmout_type;
common_hal_pulseio_pwmout_never_reset(&self->backlight_pwm);

@ -82,7 +82,7 @@ void common_hal_displayio_epaperdisplay_construct(displayio_epaperdisplay_obj_t*
if (busy_pin != NULL) {
self->busy.base.type = &digitalio_digitalinout_type;
common_hal_digitalio_digitalinout_construct(&self->busy, busy_pin);
never_reset_pin_number(busy_pin->number);
common_hal_never_reset_pin(busy_pin);
}
// Clear the color memory if it isn't in use.

@ -31,6 +31,7 @@
#include "py/gc.h"
#include "shared-bindings/busio/SPI.h"
#include "shared-bindings/digitalio/DigitalInOut.h"
#include "shared-bindings/microcontroller/Pin.h"
#include "shared-bindings/microcontroller/__init__.h"
#include "shared-bindings/time/__init__.h"
#include "shared-module/displayio/display_core.h"
@ -61,12 +62,12 @@ void common_hal_displayio_fourwire_construct(displayio_fourwire_obj_t* self,
self->reset.base.type = &digitalio_digitalinout_type;
common_hal_digitalio_digitalinout_construct(&self->reset, reset);
common_hal_digitalio_digitalinout_switch_to_output(&self->reset, true, DRIVE_MODE_PUSH_PULL);
never_reset_pin_number(reset->number);
common_hal_never_reset_pin(reset);
common_hal_displayio_fourwire_reset(self);
}
never_reset_pin_number(command->number);
never_reset_pin_number(chip_select->number);
common_hal_never_reset_pin(command);
common_hal_never_reset_pin(chip_select);
}
void common_hal_displayio_fourwire_deinit(displayio_fourwire_obj_t* self) {
@ -74,9 +75,9 @@ void common_hal_displayio_fourwire_deinit(displayio_fourwire_obj_t* self) {
common_hal_busio_spi_deinit(self->bus);
}
reset_pin_number(self->command.pin->number);
reset_pin_number(self->chip_select.pin->number);
reset_pin_number(self->reset.pin->number);
common_hal_reset_pin(self->command.pin);
common_hal_reset_pin(self->chip_select.pin);
common_hal_reset_pin(self->reset.pin);
}
bool common_hal_displayio_fourwire_reset(mp_obj_t obj) {

@ -33,6 +33,7 @@
#include "py/runtime.h"
#include "shared-bindings/busio/I2C.h"
#include "shared-bindings/digitalio/DigitalInOut.h"
#include "shared-bindings/microcontroller/Pin.h"
#include "shared-bindings/microcontroller/__init__.h"
#include "shared-bindings/time/__init__.h"
#include "shared-module/displayio/display_core.h"
@ -48,7 +49,7 @@ void common_hal_displayio_i2cdisplay_construct(displayio_i2cdisplay_obj_t* self,
self->reset.base.type = &digitalio_digitalinout_type;
common_hal_digitalio_digitalinout_construct(&self->reset, reset);
common_hal_digitalio_digitalinout_switch_to_output(&self->reset, true, DRIVE_MODE_PUSH_PULL);
never_reset_pin_number(reset->number);
common_hal_never_reset_pin(reset);
common_hal_displayio_i2cdisplay_reset(self);
}
@ -72,7 +73,7 @@ void common_hal_displayio_i2cdisplay_deinit(displayio_i2cdisplay_obj_t* self) {
common_hal_busio_i2c_deinit(self->bus);
}
reset_pin_number(self->reset.pin->number);
common_hal_reset_pin(self->reset.pin);
}
bool common_hal_displayio_i2cdisplay_reset(mp_obj_t obj) {

@ -117,7 +117,7 @@ void rgb_led_status_init() {
mp_const_none);
#else
if (!common_hal_busio_spi_deinited(&status_apa102)) {
// This may call us recursively if reset_pin_number() is called,
// This may call us recursively if common_hal_reset_pin() is called,
// The rgb_led_status_init_in_progress guard will prevent further recursion.
common_hal_busio_spi_deinit(&status_apa102);
}
@ -181,11 +181,11 @@ void rgb_led_status_init() {
void reset_status_led() {
#ifdef MICROPY_HW_NEOPIXEL
reset_pin_number(MICROPY_HW_NEOPIXEL->number);
common_hal_reset_pin(MICROPY_HW_NEOPIXEL);
#endif
#if defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK)
reset_pin_number(MICROPY_HW_APA102_MOSI->number);
reset_pin_number(MICROPY_HW_APA102_SCK->number);
common_hal_reset_pin(MICROPY_HW_APA102_MOSI);
common_hal_reset_pin(MICROPY_HW_APA102_SCK);
#endif
#if defined(CP_RGB_STATUS_LED)
// TODO: Support sharing status LED with user.

Loading…
Cancel
Save