drivers/nrf24l01: Make driver and test run on pyboard, ESP8266, ESP32.

crypto-aes
Peter Hinch 5 years ago committed by Damien George
parent 31550a52e4
commit ccaa5f5b0b
  1. 9
      drivers/nrf24l01/nrf24l01.py
  2. 53
      drivers/nrf24l01/nrf24l01test.py

@ -62,12 +62,11 @@ class NRF24L01:
# init the SPI bus and pins
self.init_spi(4000000)
cs.init(cs.OUT, value=1)
ce.init(ce.OUT, value=0)
# reset everything
self.ce(0)
self.cs(1)
ce.init(ce.OUT, value=0)
cs.init(cs.OUT, value=1)
self.payload_size = payload_size
self.pipe0_read_addr = None
utime.sleep_ms(5)
@ -215,7 +214,7 @@ class NRF24L01:
# blocking wait for tx complete
def send(self, buf, timeout=500):
send_nonblock = self.send_start(buf)
self.send_start(buf)
start = utime.ticks_ms()
result = None
while result is None and utime.ticks_diff(utime.ticks_ms(), start) < timeout:

@ -1,14 +1,38 @@
"""Test for nrf24l01 module."""
"""Test for nrf24l01 module. Portable between MicroPython targets."""
import struct
import sys
import ustruct as struct
import utime
from machine import Pin, SPI
from nrf24l01 import NRF24L01
from micropython import const
# Slave pause between receiving data and checking for further packets.
_RX_POLL_DELAY = const(15)
# Slave pauses an additional _SLAVE_SEND_DELAY ms after receiving data and before
# transmitting to allow the (remote) master time to get into receive mode. The
# master may be a slow device. Value tested with Pyboard, ESP32 and ESP8266.
_SLAVE_SEND_DELAY = const(10)
if sys.platform == 'pyboard':
cfg = {'spi': 2, 'miso': 'Y7', 'mosi': 'Y8', 'sck': 'Y6', 'csn': 'Y5', 'ce': 'Y4'}
elif sys.platform == 'esp8266': # Hardware SPI
cfg = {'spi': 1, 'miso': 12, 'mosi': 13, 'sck': 14, 'csn': 4, 'ce': 5}
elif sys.platform == 'esp32': # Software SPI
cfg = {'spi': -1, 'miso': 32, 'mosi': 33, 'sck': 25, 'csn': 26, 'ce': 27}
else:
raise ValueError('Unsupported platform {}'.format(sys.platform))
pipes = (b'\xf0\xf0\xf0\xf0\xe1', b'\xf0\xf0\xf0\xf0\xd2')
def master():
nrf = NRF24L01(SPI(2), Pin('Y5'), Pin('Y4'), payload_size=8)
csn = Pin(cfg['csn'], mode=Pin.OUT, value=1)
ce = Pin(cfg['ce'], mode=Pin.OUT, value=0)
if cfg['spi'] == -1:
spi = SPI(-1, sck=Pin(cfg['sck']), mosi=Pin(cfg['mosi']), miso=Pin(cfg['miso']))
nrf = NRF24L01(spi, csn, ce, payload_size=8)
else:
nrf = NRF24L01(SPI(cfg['spi']), csn, ce, payload_size=8)
nrf.open_tx_pipe(pipes[0])
nrf.open_rx_pipe(1, pipes[1])
@ -60,7 +84,13 @@ def master():
print('master finished sending; successes=%d, failures=%d' % (num_successes, num_failures))
def slave():
nrf = NRF24L01(SPI(2), Pin('Y5'), Pin('Y4'), payload_size=8)
csn = Pin(cfg['csn'], mode=Pin.OUT, value=1)
ce = Pin(cfg['ce'], mode=Pin.OUT, value=0)
if cfg['spi'] == -1:
spi = SPI(-1, sck=Pin(cfg['sck']), mosi=Pin(cfg['mosi']), miso=Pin(cfg['miso']))
nrf = NRF24L01(spi, csn, ce, payload_size=8)
else:
nrf = NRF24L01(SPI(cfg['spi']), csn, ce, payload_size=8)
nrf.open_tx_pipe(pipes[1])
nrf.open_rx_pipe(1, pipes[0])
@ -69,7 +99,6 @@ def slave():
print('NRF24L01 slave mode, waiting for packets... (ctrl-C to stop)')
while True:
machine.idle()
if nrf.any():
while nrf.any():
buf = nrf.recv()
@ -81,8 +110,10 @@ def slave():
else:
led.off()
led_state >>= 1
utime.sleep_ms(15)
utime.sleep_ms(_RX_POLL_DELAY)
# Give master time to get into receive mode.
utime.sleep_ms(_SLAVE_SEND_DELAY)
nrf.stop_listening()
try:
nrf.send(struct.pack('i', millis))
@ -99,9 +130,9 @@ except:
print('NRF24L01 test module loaded')
print('NRF24L01 pinout for test:')
print(' CE on Y4')
print(' CSN on Y5')
print(' SCK on Y6')
print(' MISO on Y7')
print(' MOSI on Y8')
print(' CE on', cfg['ce'])
print(' CSN on', cfg['csn'])
print(' SCK on', cfg['sck'])
print(' MISO on', cfg['miso'])
print(' MOSI on', cfg['mosi'])
print('run nrf24l01test.slave() on slave, then nrf24l01test.master() on master')

Loading…
Cancel
Save