nrf: bleio: parameterize softradio configuration

Allow for setting various softradio memory settings as part of a
board in order to support lower-memory configurations.  If a
parameter is unspecified then the previously-defined value is used.

Signed-off-by: Sean Cross <sean@xobs.io>
crypto-aes
Sean Cross 2 years ago
parent 3537ad4059
commit c04e6d6f52
  1. 30
      ports/nrf/common-hal/_bleio/Adapter.c
  2. 2
      ports/nrf/common-hal/_bleio/Adapter.h

@ -56,6 +56,26 @@
#define BLE_SLAVE_LATENCY 0
#define BLE_CONN_SUP_TIMEOUT MSEC_TO_UNITS(4000, UNIT_10_MS)
#ifndef BLEIO_VS_UUID_COUNT
#define BLEIO_VS_UUID_COUNT 75
#endif
#ifndef BLEIO_HVN_TX_QUEUE_SIZE
#define BLEIO_HVN_TX_QUEUE_SIZE 9
#endif
#ifndef BLEIO_CENTRAL_ROLE_COUNT
#define BLEIO_CENTRAL_ROLE_COUNT 4
#endif
#ifndef BLEIO_PERIPH_ROLE_COUNT
#define BLEIO_PERIPH_ROLE_COUNT 4
#endif
#ifndef BLEIO_ATTR_TAB_SIZE
#define BLEIO_ATTR_TAB_SIZE (BLE_GATTS_ATTR_TAB_SIZE_DEFAULT * 5)
#endif
const nvm_bytearray_obj_t common_hal_bleio_nvm_obj = {
.base = {
.type = &nvm_bytearray_type,
@ -124,9 +144,9 @@ STATIC uint32_t ble_stack_enable(void) {
// adv_set_count must be == 1 for S140. Cannot be increased.
ble_conf.gap_cfg.role_count_cfg.adv_set_count = 1;
// periph_role_count costs 1232 bytes for 2 to 3, then ~1840 for each further increment.
ble_conf.gap_cfg.role_count_cfg.periph_role_count = 4;
ble_conf.gap_cfg.role_count_cfg.periph_role_count = BLEIO_PERIPH_ROLE_COUNT;
// central_role_count costs 648 bytes for 1 to 2, then ~1250 for each further increment.
ble_conf.gap_cfg.role_count_cfg.central_role_count = 4;
ble_conf.gap_cfg.role_count_cfg.central_role_count = BLEIO_CENTRAL_ROLE_COUNT;
err_code = sd_ble_cfg_set(BLE_GAP_CFG_ROLE_COUNT, &ble_conf, app_ram_start);
if (err_code != NRF_SUCCESS) {
return err_code;
@ -137,7 +157,7 @@ STATIC uint32_t ble_stack_enable(void) {
// Each increment to hvn_tx_queue_size costs 2064 bytes.
// DevZone recommends not setting this directly, but instead changing gap_conn_cfg.event_length.
// However, we are setting connection extension, so this seems to make sense.
ble_conf.conn_cfg.params.gatts_conn_cfg.hvn_tx_queue_size = 9;
ble_conf.conn_cfg.params.gatts_conn_cfg.hvn_tx_queue_size = BLEIO_HVN_TX_QUEUE_SIZE;
err_code = sd_ble_cfg_set(BLE_CONN_CFG_GATTS, &ble_conf, app_ram_start);
if (err_code != NRF_SUCCESS) {
return err_code;
@ -156,7 +176,7 @@ STATIC uint32_t ble_stack_enable(void) {
// and anything the user does.
memset(&ble_conf, 0, sizeof(ble_conf));
// Each increment to the BLE_GATTS_ATTR_TAB_SIZE_DEFAULT multiplier costs 1408 bytes.
ble_conf.gatts_cfg.attr_tab_size.attr_tab_size = BLE_GATTS_ATTR_TAB_SIZE_DEFAULT * 5;
ble_conf.gatts_cfg.attr_tab_size.attr_tab_size = BLEIO_ATTR_TAB_SIZE;
err_code = sd_ble_cfg_set(BLE_GATTS_CFG_ATTR_TAB_SIZE, &ble_conf, app_ram_start);
if (err_code != NRF_SUCCESS) {
return err_code;
@ -166,7 +186,7 @@ STATIC uint32_t ble_stack_enable(void) {
// service and characteristic.
memset(&ble_conf, 0, sizeof(ble_conf));
// Each additional vs_uuid_count costs 16 bytes.
ble_conf.common_cfg.vs_uuid_cfg.vs_uuid_count = 75; // Defaults to 10.
ble_conf.common_cfg.vs_uuid_cfg.vs_uuid_count = BLEIO_VS_UUID_COUNT; // Defaults to 10.
err_code = sd_ble_cfg_set(BLE_COMMON_CFG_VS_UUID, &ble_conf, app_ram_start);
if (err_code != NRF_SUCCESS) {
return err_code;

@ -35,7 +35,9 @@
#include "shared-bindings/_bleio/Connection.h"
#include "shared-bindings/_bleio/ScanResults.h"
#ifndef BLEIO_TOTAL_CONNECTION_COUNT
#define BLEIO_TOTAL_CONNECTION_COUNT 5
#endif
extern bleio_connection_internal_t bleio_connections[BLEIO_TOTAL_CONNECTION_COUNT];

Loading…
Cancel
Save