stm32/uart: Add UART support for H7 MCUs.

crypto-aes
iabdalkader 5 years ago committed by Damien George
parent a863c60439
commit b982b95c18

@ -91,8 +91,26 @@ struct _pyb_uart_obj_t {
};
STATIC mp_obj_t pyb_uart_deinit(mp_obj_t self_in);
extern void NORETURN __fatal_error(const char *msg);
void uart_init0(void) {
#if defined(STM32H7)
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Configure USART1/6 clock source
RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART16;
RCC_PeriphClkInit.Usart16ClockSelection = RCC_USART16CLKSOURCE_D2PCLK2;
if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) {
__fatal_error("HAL_RCCEx_PeriphCLKConfig");
}
// Configure USART2/3/4/5/7/8 clock source
RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART234578;
RCC_PeriphClkInit.Usart16ClockSelection = RCC_USART234578CLKSOURCE_D2PCLK1;
if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) {
__fatal_error("HAL_RCCEx_PeriphCLKConfig");
}
#endif
for (int i = 0; i < MP_ARRAY_SIZE(MP_STATE_PORT(pyb_uart_obj_all)); i++) {
MP_STATE_PORT(pyb_uart_obj_all)[i] = NULL;
}
@ -365,7 +383,7 @@ int uart_rx_char(pyb_uart_obj_t *self) {
return data;
} else {
// no buffering
#if defined(MCU_SERIES_F7) || defined(MCU_SERIES_L4)
#if defined(MCU_SERIES_F7) || defined(MCU_SERIES_L4) || defined(STM32H7)
return self->uart.Instance->RDR & self->char_mask;
#else
return self->uart.Instance->DR & self->char_mask;
@ -483,7 +501,7 @@ void uart_irq_handler(mp_uint_t uart_id) {
uint16_t next_head = (self->read_buf_head + 1) % self->read_buf_len;
if (next_head != self->read_buf_tail) {
// only read data if room in buf
#if defined(MCU_SERIES_F7) || defined(MCU_SERIES_L4)
#if defined(MCU_SERIES_F7) || defined(MCU_SERIES_L4) || defined(STM32H7)
int data = self->uart.Instance->RDR; // clears UART_FLAG_RXNE
#else
int data = self->uart.Instance->DR; // clears UART_FLAG_RXNE
@ -668,15 +686,28 @@ STATIC mp_obj_t pyb_uart_init_helper(pyb_uart_obj_t *self, size_t n_args, const
// compute actual baudrate that was configured
// (this formula assumes UART_OVERSAMPLING_16)
uint32_t actual_baudrate = 0;
#if defined(MCU_SERIES_F7)
#if defined(MCU_SERIES_F7) || defined(STM32H7)
UART_ClockSourceTypeDef clocksource = UART_CLOCKSOURCE_UNDEFINED;
UART_GETCLOCKSOURCE(&self->uart, clocksource);
switch (clocksource) {
#if defined(STM32H7)
case UART_CLOCKSOURCE_D2PCLK1: actual_baudrate = HAL_RCC_GetPCLK1Freq(); break;
case UART_CLOCKSOURCE_D3PCLK1: actual_baudrate = HAL_RCC_GetPCLK1Freq(); break;
case UART_CLOCKSOURCE_D2PCLK2: actual_baudrate = HAL_RCC_GetPCLK2Freq(); break;
#else
case UART_CLOCKSOURCE_PCLK1: actual_baudrate = HAL_RCC_GetPCLK1Freq(); break;
case UART_CLOCKSOURCE_PCLK2: actual_baudrate = HAL_RCC_GetPCLK2Freq(); break;
case UART_CLOCKSOURCE_HSI: actual_baudrate = HSI_VALUE; break;
case UART_CLOCKSOURCE_SYSCLK: actual_baudrate = HAL_RCC_GetSysClockFreq(); break;
#endif
#if defined(STM32H7)
case UART_CLOCKSOURCE_CSI: actual_baudrate = CSI_VALUE; break;
#endif
case UART_CLOCKSOURCE_HSI: actual_baudrate = HSI_VALUE; break;
case UART_CLOCKSOURCE_LSE: actual_baudrate = LSE_VALUE; break;
#if defined(STM32H7)
case UART_CLOCKSOURCE_PLL2:
case UART_CLOCKSOURCE_PLL3:
#endif
case UART_CLOCKSOURCE_UNDEFINED: break;
}
#else
@ -906,7 +937,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_1(pyb_uart_readchar_obj, pyb_uart_readchar);
// uart.sendbreak()
STATIC mp_obj_t pyb_uart_sendbreak(mp_obj_t self_in) {
pyb_uart_obj_t *self = self_in;
#if defined(MCU_SERIES_F7) || defined(MCU_SERIES_L4)
#if defined(MCU_SERIES_F7) || defined(MCU_SERIES_L4) || defined(STM32H7)
self->uart.Instance->RQR = USART_RQR_SBKRQ; // write-only register
#else
self->uart.Instance->CR1 |= USART_CR1_SBK;

Loading…
Cancel
Save