Remove nRF52832 support
This commit is contained in:
parent
1dc3957e72
commit
b6b5ed9c89
|
@ -21,7 +21,7 @@ git:
|
|||
# that SDK is shortest and add it there. In the case of major re-organizations,
|
||||
# just try to make the builds "about equal in run time"
|
||||
env:
|
||||
- TRAVIS_TESTS="unix docs translations website" TRAVIS_BOARDS="feather_huzzah circuitplayground_express mini_sam_m4 grandcentral_m4_express pca10056 pca10059 feather_nrf52832 feather_nrf52840_express makerdiary_nrf52840_mdk particle_boron particle_argon particle_xenon sparkfun_nrf52840_mini" TRAVIS_SDK=arm:nrf:esp8266
|
||||
- TRAVIS_TESTS="unix docs translations website" TRAVIS_BOARDS="feather_huzzah circuitplayground_express mini_sam_m4 grandcentral_m4_express pca10056 pca10059 feather_nrf52840_express makerdiary_nrf52840_mdk particle_boron particle_argon particle_xenon sparkfun_nrf52840_mini" TRAVIS_SDK=arm:nrf:esp8266
|
||||
- TRAVIS_BOARDS="metro_m0_express metro_m4_express pirkey_m0 trellis_m4_express trinket_m0" TRAVIS_SDK=arm
|
||||
- TRAVIS_BOARDS="feather_radiofruit_zigbee gemma_m0 hallowing_m0_express itsybitsy_m0_express itsybitsy_m4_express meowmeow" TRAVIS_SDK=arm
|
||||
- TRAVIS_BOARDS="feather_m0_express_crickit feather_m0_rfm69 feather_m0_rfm9x feather_m4_express arduino_zero arduino_mkr1300 arduino_mkrzero" TRAVIS_SDK=arm
|
||||
|
|
|
@ -22,9 +22,6 @@ This is a port of CircuitPython to the Nordic Semiconductor nRF52 series of chip
|
|||
|
||||
## Tested Hardware
|
||||
|
||||
* nRF52832
|
||||
* [PCA10040](http://infocenter.nordicsemi.com/index.jsp?topic=%2Fcom.nordic.infocenter.nrf52%2Fdita%2Fnrf52%2Fdevelopment%2Fnrf52_dev_kit.html)
|
||||
* [Adafruit Feather nRF52](https://www.adafruit.com/product/3406)
|
||||
* nRF52840
|
||||
* [PCA10056](http://www.nordicsemi.com/eng/Products/nRF52840-Preview-DK)
|
||||
|
||||
|
@ -36,7 +33,6 @@ the following links:
|
|||
> **NOTE**: These board specific readmes may be more up to date than the
|
||||
generic board-neutral documentation further down.
|
||||
|
||||
* Adafruit [Feather nRF52](boards/feather_nrf52832/README.md): 512KB Flash, 64KB SRAM
|
||||
* Adafruit [Feather nRF52840](boards/feather_nrf52840_express/README.md): 1MB Flash, 256KB SRAM
|
||||
* Nordic PCA10056 see [Feather nRF52840](boards/pca10056/README.md)
|
||||
* MakerDiary NRF52840 MDK see [its README](boards/makerdiary_nrf52840_mdk/README.md)
|
||||
|
@ -77,9 +73,7 @@ Note: further tuning of features to include in bluetooth or even setting up the
|
|||
|
||||
Target Board (BOARD) | Bluetooth Stack (SD) | Bluetooth Support | Flash Util
|
||||
-------------------------|-------------------------|------------------------|-------------------------------
|
||||
pca10040 | s132 | Peripheral and Scanner | [Segger](#segger-targets)
|
||||
pca10056 | s140 | Peripheral and Scanner | [Segger](#segger-targets)
|
||||
feather_nrf52832 | s132 | Peripheral and Scanner | [UART DFU](#dfu-targets)
|
||||
feather_nrf52840_express | s140 | Peripheral and Scanner | UF2 bootloader
|
||||
makerdiary_nrf52840_mdk | s140 | Peripheral and Scanner | pyocd or ARM mbed DAPLink
|
||||
|
||||
|
@ -111,8 +105,8 @@ run follow command to install [adafruit-nrfutil](https://github.com/adafruit/Ada
|
|||
|
||||
Example on how to generate and flash feather_nrf52832 target:
|
||||
|
||||
make BOARD=feather_nrf52832 SD=s132
|
||||
make BOARD=feather_nrf52832 SD=s132 dfu-gen dfu-flash
|
||||
make BOARD=feather_nrf52840 SD=s140
|
||||
make BOARD=feather_nrf52840 SD=s140 dfu-gen dfu-flash
|
||||
|
||||
## Bluetooth LE REPL
|
||||
|
||||
|
|
|
@ -1,12 +1,4 @@
|
|||
ifeq ($(SD), s132)
|
||||
CFLAGS += -DBLUETOOTH_SD=132
|
||||
|
||||
ifeq ($(SOFTDEV_VERSION), 2.0.1)
|
||||
CFLAGS += -DBLE_API_VERSION=2
|
||||
else ifeq ($(SOFTDEV_VERSION), 5.0.0)
|
||||
CFLAGS += -DBLE_API_VERSION=4
|
||||
endif
|
||||
else ifeq ($(SD), s140)
|
||||
ifeq ($(SD), s140)
|
||||
CFLAGS += -DBLUETOOTH_SD=140
|
||||
CFLAGS += -DBLE_API_VERSION=4
|
||||
else
|
||||
|
|
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
|
@ -1,620 +0,0 @@
|
|||
/*
|
||||
* Copyright (c) 2012 - 2017, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
@addtogroup BLE_COMMON BLE SoftDevice Common
|
||||
@{
|
||||
@defgroup ble_api Events, type definitions and API calls
|
||||
@{
|
||||
|
||||
@brief Module independent events, type definitions and API calls for the BLE SoftDevice.
|
||||
|
||||
*/
|
||||
|
||||
#ifndef BLE_H__
|
||||
#define BLE_H__
|
||||
|
||||
#include "ble_ranges.h"
|
||||
#include "ble_types.h"
|
||||
#include "ble_gap.h"
|
||||
#include "ble_l2cap.h"
|
||||
#include "ble_gatt.h"
|
||||
#include "ble_gattc.h"
|
||||
#include "ble_gatts.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup BLE_COMMON_ENUMERATIONS Enumerations
|
||||
* @{ */
|
||||
|
||||
/**
|
||||
* @brief Common API SVC numbers.
|
||||
*/
|
||||
enum BLE_COMMON_SVCS
|
||||
{
|
||||
SD_BLE_ENABLE = BLE_SVC_BASE, /**< Enable and initialize the BLE stack */
|
||||
SD_BLE_EVT_GET, /**< Get an event from the pending events queue. */
|
||||
SD_BLE_UUID_VS_ADD, /**< Add a Vendor Specific UUID. */
|
||||
SD_BLE_UUID_DECODE, /**< Decode UUID bytes. */
|
||||
SD_BLE_UUID_ENCODE, /**< Encode UUID bytes. */
|
||||
SD_BLE_VERSION_GET, /**< Get the local version information (company ID, Link Layer Version, Link Layer Subversion). */
|
||||
SD_BLE_USER_MEM_REPLY, /**< User Memory Reply. */
|
||||
SD_BLE_OPT_SET, /**< Set a BLE option. */
|
||||
SD_BLE_OPT_GET, /**< Get a BLE option. */
|
||||
SD_BLE_CFG_SET, /**< Add a configuration to the BLE stack. */
|
||||
};
|
||||
|
||||
/**
|
||||
* @brief BLE Module Independent Event IDs.
|
||||
*/
|
||||
enum BLE_COMMON_EVTS
|
||||
{
|
||||
BLE_EVT_USER_MEM_REQUEST = BLE_EVT_BASE, /**< User Memory request. @ref ble_evt_user_mem_request_t */
|
||||
BLE_EVT_USER_MEM_RELEASE, /**< User Memory release. @ref ble_evt_user_mem_release_t */
|
||||
};
|
||||
|
||||
/**@brief BLE Connection Configuration IDs.
|
||||
*
|
||||
* IDs that uniquely identify a connection configuration.
|
||||
*/
|
||||
enum BLE_CONN_CFGS
|
||||
{
|
||||
BLE_CONN_CFG_GAP = BLE_CONN_CFG_BASE, /**< BLE GAP specific connection configuration. */
|
||||
BLE_CONN_CFG_GATTC, /**< BLE GATTC specific connection configuration. */
|
||||
BLE_CONN_CFG_GATTS, /**< BLE GATTS specific connection configuration. */
|
||||
BLE_CONN_CFG_GATT, /**< BLE GATT specific connection configuration. */
|
||||
BLE_CONN_CFG_L2CAP, /**< BLE L2CAP specific connection configuration. */
|
||||
};
|
||||
|
||||
/**@brief BLE Common Configuration IDs.
|
||||
*
|
||||
* IDs that uniquely identify a common configuration.
|
||||
*/
|
||||
enum BLE_COMMON_CFGS
|
||||
{
|
||||
BLE_COMMON_CFG_VS_UUID = BLE_CFG_BASE, /**< Vendor specific UUID configuration */
|
||||
};
|
||||
|
||||
/**@brief Common Option IDs.
|
||||
* IDs that uniquely identify a common option.
|
||||
*/
|
||||
enum BLE_COMMON_OPTS
|
||||
{
|
||||
BLE_COMMON_OPT_PA_LNA = BLE_OPT_BASE, /**< PA and LNA options */
|
||||
BLE_COMMON_OPT_CONN_EVT_EXT, /**< Extended connection events option */
|
||||
};
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup BLE_COMMON_DEFINES Defines
|
||||
* @{ */
|
||||
|
||||
/** @brief Required pointer alignment for BLE Events.
|
||||
*/
|
||||
#define BLE_EVT_PTR_ALIGNMENT 4
|
||||
|
||||
/** @brief Leaves the maximum of the two arguments.
|
||||
*/
|
||||
#define BLE_MAX(a, b) ((a) < (b) ? (b) : (a))
|
||||
|
||||
/** @brief Maximum possible length for BLE Events.
|
||||
* @note The highest value used for @ref ble_gatt_conn_cfg_t::att_mtu in any connection configuration shall be used as a parameter.
|
||||
* If that value has not been configured for any connections then @ref BLE_GATT_ATT_MTU_DEFAULT must be used instead.
|
||||
*/
|
||||
#define BLE_EVT_LEN_MAX(ATT_MTU) (BLE_MAX( \
|
||||
sizeof(ble_evt_t), \
|
||||
BLE_MAX( \
|
||||
offsetof(ble_evt_t, evt.gattc_evt.params.rel_disc_rsp.includes) + ((ATT_MTU) - 2) / 6 * sizeof(ble_gattc_include_t), \
|
||||
offsetof(ble_evt_t, evt.gattc_evt.params.attr_info_disc_rsp.info.attr_info16) + ((ATT_MTU) - 2) / 4 * sizeof(ble_gattc_attr_info16_t) \
|
||||
) \
|
||||
))
|
||||
|
||||
/** @defgroup BLE_USER_MEM_TYPES User Memory Types
|
||||
* @{ */
|
||||
#define BLE_USER_MEM_TYPE_INVALID 0x00 /**< Invalid User Memory Types. */
|
||||
#define BLE_USER_MEM_TYPE_GATTS_QUEUED_WRITES 0x01 /**< User Memory for GATTS queued writes. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_UUID_VS_COUNTS Vendor Specific UUID counts
|
||||
* @{
|
||||
*/
|
||||
#define BLE_UUID_VS_COUNT_DEFAULT 10 /**< Default VS UUID count. */
|
||||
#define BLE_UUID_VS_COUNT_MAX 254 /**< Maximum VS UUID count. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_COMMON_CFG_DEFAULTS Configuration defaults.
|
||||
* @{
|
||||
*/
|
||||
#define BLE_CONN_CFG_TAG_DEFAULT 0 /**< Default configuration tag, SoftDevice default connection configuration. */
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup BLE_COMMON_STRUCTURES Structures
|
||||
* @{ */
|
||||
|
||||
/**@brief User Memory Block. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t *p_mem; /**< Pointer to the start of the user memory block. */
|
||||
uint16_t len; /**< Length in bytes of the user memory block. */
|
||||
} ble_user_mem_block_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_EVT_USER_MEM_REQUEST. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t type; /**< User memory type, see @ref BLE_USER_MEM_TYPES. */
|
||||
} ble_evt_user_mem_request_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_EVT_USER_MEM_RELEASE. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t type; /**< User memory type, see @ref BLE_USER_MEM_TYPES. */
|
||||
ble_user_mem_block_t mem_block; /**< User memory block */
|
||||
} ble_evt_user_mem_release_t;
|
||||
|
||||
/**@brief Event structure for events not associated with a specific function module. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t conn_handle; /**< Connection Handle on which this event occurred. */
|
||||
union
|
||||
{
|
||||
ble_evt_user_mem_request_t user_mem_request; /**< User Memory Request Event Parameters. */
|
||||
ble_evt_user_mem_release_t user_mem_release; /**< User Memory Release Event Parameters. */
|
||||
} params; /**< Event parameter union. */
|
||||
} ble_common_evt_t;
|
||||
|
||||
/**@brief BLE Event header. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t evt_id; /**< Value from a BLE_<module>_EVT series. */
|
||||
uint16_t evt_len; /**< Length in octets including this header. */
|
||||
} ble_evt_hdr_t;
|
||||
|
||||
/**@brief Common BLE Event type, wrapping the module specific event reports. */
|
||||
typedef struct
|
||||
{
|
||||
ble_evt_hdr_t header; /**< Event header. */
|
||||
union
|
||||
{
|
||||
ble_common_evt_t common_evt; /**< Common Event, evt_id in BLE_EVT_* series. */
|
||||
ble_gap_evt_t gap_evt; /**< GAP originated event, evt_id in BLE_GAP_EVT_* series. */
|
||||
ble_gattc_evt_t gattc_evt; /**< GATT client originated event, evt_id in BLE_GATTC_EVT* series. */
|
||||
ble_gatts_evt_t gatts_evt; /**< GATT server originated event, evt_id in BLE_GATTS_EVT* series. */
|
||||
ble_l2cap_evt_t l2cap_evt; /**< L2CAP originated event, evt_id in BLE_L2CAP_EVT* series. */
|
||||
} evt; /**< Event union. */
|
||||
} ble_evt_t;
|
||||
|
||||
|
||||
/**
|
||||
* @brief Version Information.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t version_number; /**< Link Layer Version number. See https://www.bluetooth.org/en-us/specification/assigned-numbers/link-layer for assigned values. */
|
||||
uint16_t company_id; /**< Company ID, Nordic Semiconductor's company ID is 89 (0x0059) (https://www.bluetooth.org/apps/content/Default.aspx?doc_id=49708). */
|
||||
uint16_t subversion_number; /**< Link Layer Sub Version number, corresponds to the SoftDevice Config ID or Firmware ID (FWID). */
|
||||
} ble_version_t;
|
||||
|
||||
/**
|
||||
* @brief Configuration parameters for the PA and LNA.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t enable :1; /**< Enable toggling for this amplifier */
|
||||
uint8_t active_high :1; /**< Set the pin to be active high */
|
||||
uint8_t gpio_pin :6; /**< The GPIO pin to toggle for this amplifier */
|
||||
} ble_pa_lna_cfg_t;
|
||||
|
||||
/**
|
||||
* @brief PA & LNA GPIO toggle configuration
|
||||
*
|
||||
* This option configures the SoftDevice to toggle pins when the radio is active for use with a power amplifier and/or
|
||||
* a low noise amplifier.
|
||||
*
|
||||
* Toggling the pins is achieved by using two PPI channels and a GPIOTE channel. The hardware channel IDs are provided
|
||||
* by the application and should be regarded as reserved as long as any PA/LNA toggling is enabled.
|
||||
*
|
||||
* @note @ref sd_ble_opt_get is not supported for this option.
|
||||
* @note Setting this option while the radio is in use (i.e. any of the roles are active) may have undefined consequences
|
||||
* and must be avoided by the application.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
ble_pa_lna_cfg_t pa_cfg; /**< Power Amplifier configuration */
|
||||
ble_pa_lna_cfg_t lna_cfg; /**< Low Noise Amplifier configuration */
|
||||
|
||||
uint8_t ppi_ch_id_set; /**< PPI channel used for radio pin setting */
|
||||
uint8_t ppi_ch_id_clr; /**< PPI channel used for radio pin clearing */
|
||||
uint8_t gpiote_ch_id; /**< GPIOTE channel used for radio pin toggling */
|
||||
} ble_common_opt_pa_lna_t;
|
||||
|
||||
/**
|
||||
* @brief Configuration of extended BLE connection events.
|
||||
*
|
||||
* When enabled the SoftDevice will dynamically extend the connection event when possible.
|
||||
*
|
||||
* The connection event length is controlled by the connection configuration as set by @ref ble_gap_conn_cfg_t::event_length.
|
||||
* The connection event can be extended if there is time to send another packet pair before the start of the next connection interval,
|
||||
* and if there are no conflicts with other BLE roles requesting radio time.
|
||||
*
|
||||
* @note @ref sd_ble_opt_get is not supported for this option.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t enable : 1; /**< Enable extended BLE connection events, disabled by default. */
|
||||
} ble_common_opt_conn_evt_ext_t;
|
||||
|
||||
/**@brief Option structure for common options. */
|
||||
typedef union
|
||||
{
|
||||
ble_common_opt_pa_lna_t pa_lna; /**< Parameters for controlling PA and LNA pin toggling. */
|
||||
ble_common_opt_conn_evt_ext_t conn_evt_ext; /**< Parameters for enabling extended connection events. */
|
||||
} ble_common_opt_t;
|
||||
|
||||
/**@brief Common BLE Option type, wrapping the module specific options. */
|
||||
typedef union
|
||||
{
|
||||
ble_common_opt_t common_opt; /**< COMMON options, opt_id in @ref BLE_COMMON_OPTS series. */
|
||||
ble_gap_opt_t gap_opt; /**< GAP option, opt_id in @ref BLE_GAP_OPTS series. */
|
||||
} ble_opt_t;
|
||||
|
||||
/**@brief BLE connection configuration type, wrapping the module specific configurations, set with
|
||||
* @ref sd_ble_cfg_set.
|
||||
*
|
||||
* @note Connection configurations don't have to be set.
|
||||
* In the case that no configurations has been set, or fewer connection configurations has been set than enabled connections,
|
||||
* the default connection configuration will be automatically added for the remaining connections.
|
||||
* When creating connections with the default configuration, @ref BLE_CONN_CFG_TAG_DEFAULT should be used in
|
||||
* place of @ref ble_conn_cfg_t::conn_cfg_tag. See @ref sd_ble_gap_adv_start() and @ref sd_ble_gap_connect()"
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_CONN_CFG}
|
||||
* @endmscs
|
||||
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t conn_cfg_tag; /**< The application chosen tag it can use with the @ref sd_ble_gap_adv_start() and @ref sd_ble_gap_connect()
|
||||
calls to select this configuration when creating a connection.
|
||||
Must be different for all connection configurations added and not @ref BLE_CONN_CFG_TAG_DEFAULT. */
|
||||
union {
|
||||
ble_gap_conn_cfg_t gap_conn_cfg; /**< GAP connection configuration, cfg_id is @ref BLE_CONN_CFG_GAP. */
|
||||
ble_gattc_conn_cfg_t gattc_conn_cfg; /**< GATTC connection configuration, cfg_id is @ref BLE_CONN_CFG_GATTC. */
|
||||
ble_gatts_conn_cfg_t gatts_conn_cfg; /**< GATTS connection configuration, cfg_id is @ref BLE_CONN_CFG_GATTS. */
|
||||
ble_gatt_conn_cfg_t gatt_conn_cfg; /**< GATT connection configuration, cfg_id is @ref BLE_CONN_CFG_GATT. */
|
||||
ble_l2cap_conn_cfg_t l2cap_conn_cfg; /**< L2CAP connection configuration, cfg_id is @ref BLE_CONN_CFG_L2CAP. */
|
||||
} params; /**< Connection configuration union. */
|
||||
} ble_conn_cfg_t;
|
||||
|
||||
/**
|
||||
* @brief Configuration of Vendor Specific UUIDs, set with @ref sd_ble_cfg_set.
|
||||
*
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Too many UUIDs configured.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t vs_uuid_count; /**< Number of 128-bit Vendor Specific UUID bases to allocate memory for.
|
||||
Default value is @ref BLE_UUID_VS_COUNT_DEFAULT. Maximum value is
|
||||
@ref BLE_UUID_VS_COUNT_MAX. */
|
||||
} ble_common_cfg_vs_uuid_t;
|
||||
|
||||
/**@brief Common BLE Configuration type, wrapping the common configurations. */
|
||||
typedef union
|
||||
{
|
||||
ble_common_cfg_vs_uuid_t vs_uuid_cfg; /**< Vendor specific UUID configuration, cfg_id is @ref BLE_COMMON_CFG_VS_UUID. */
|
||||
} ble_common_cfg_t;
|
||||
|
||||
/**@brief BLE Configuration type, wrapping the module specific configurations. */
|
||||
typedef union
|
||||
{
|
||||
ble_conn_cfg_t conn_cfg; /**< Connection specific configurations, cfg_id in @ref BLE_CONN_CFGS series. */
|
||||
ble_common_cfg_t common_cfg; /**< Global common configurations, cfg_id in @ref BLE_COMMON_CFGS series. */
|
||||
ble_gap_cfg_t gap_cfg; /**< Global GAP configurations, cfg_id in @ref BLE_GAP_CFGS series. */
|
||||
ble_gatts_cfg_t gatts_cfg; /**< Global GATTS configuration, cfg_id in @ref BLE_GATTS_CFGS series. */
|
||||
} ble_cfg_t;
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup BLE_COMMON_FUNCTIONS Functions
|
||||
* @{ */
|
||||
|
||||
/**@brief Enable the BLE stack
|
||||
*
|
||||
* @param[in, out] p_app_ram_base Pointer to a variable containing the start address of the
|
||||
* application RAM region (APP_RAM_BASE). On return, this will
|
||||
* contain the minimum start address of the application RAM region
|
||||
* required by the SoftDevice for this configuration.
|
||||
*
|
||||
* @note The memory requirement for a specific configuration will not increase between SoftDevices
|
||||
* with the same major version number.
|
||||
*
|
||||
* @note The value of *p_app_ram_base when the app has done no custom configuration of the
|
||||
* SoftDevice, i.e. the app has not called @ref sd_ble_cfg_set before @ref sd_ble_enable, can
|
||||
* be found in the release notes.
|
||||
*
|
||||
* @note At runtime the IC's RAM is split into 2 regions: The SoftDevice RAM region is located
|
||||
* between 0x20000000 and APP_RAM_BASE-1 and the application's RAM region is located between
|
||||
* APP_RAM_BASE and the start of the call stack.
|
||||
*
|
||||
* @details This call initializes the BLE stack, no BLE related function other than @ref
|
||||
* sd_ble_cfg_set can be called before this one.
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_COMMON_ENABLE}
|
||||
* @endmscs
|
||||
*
|
||||
* @retval ::NRF_SUCCESS The BLE stack has been initialized successfully.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE The BLE stack had already been initialized and cannot be reinitialized.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied.
|
||||
* @retval ::NRF_ERROR_NO_MEM The amount of memory assigned to the SoftDevice by *p_app_ram_base is not
|
||||
* large enough to fit this configuration's memory requirement. Check *p_app_ram_base
|
||||
* and set the start address of the application RAM region accordingly.
|
||||
*/
|
||||
SVCALL(SD_BLE_ENABLE, uint32_t, sd_ble_enable(uint32_t * p_app_ram_base));
|
||||
|
||||
/**@brief Add configurations for the BLE stack
|
||||
*
|
||||
* @param[in] cfg_id Config ID, see @ref BLE_CONN_CFGS, @ref BLE_COMMON_CFGS, @ref
|
||||
* BLE_GAP_CFGS or @ref BLE_GATTS_CFGS.
|
||||
* @param[in] p_cfg Pointer to a ble_cfg_t structure containing the configuration value.
|
||||
* @param[in] app_ram_base The start address of the application RAM region (APP_RAM_BASE).
|
||||
* See @ref sd_ble_enable for details about APP_RAM_BASE.
|
||||
*
|
||||
* @note The memory requirement for a specific configuration will not increase between SoftDevices
|
||||
* with the same major version number.
|
||||
*
|
||||
* @note If a configuration is set more than once, the last one set is the one that takes effect on
|
||||
* @ref sd_ble_enable.
|
||||
*
|
||||
* @note Any part of the BLE stack that is NOT configured with @ref sd_ble_cfg_set will have default
|
||||
* configuration.
|
||||
*
|
||||
* @note @ref sd_ble_cfg_set may be called at any time when the SoftDevice is enabled (see @ref
|
||||
* sd_softdevice_enable) while the BLE part of the SoftDevice is not enabled (see @ref
|
||||
* sd_ble_enable).
|
||||
*
|
||||
* @note Error codes for the configurations are described in the configuration structs.
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_COMMON_ENABLE}
|
||||
* @endmscs
|
||||
*
|
||||
* @retval ::NRF_SUCCESS The configuration has been added successfully.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE The BLE stack had already been initialized.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid cfg_id supplied.
|
||||
* @retval ::NRF_ERROR_NO_MEM The amount of memory assigned to the SoftDevice by app_ram_base is not
|
||||
* large enough to fit this configuration's memory requirement.
|
||||
*/
|
||||
SVCALL(SD_BLE_CFG_SET, uint32_t, sd_ble_cfg_set(uint32_t cfg_id, ble_cfg_t const * p_cfg, uint32_t app_ram_base));
|
||||
|
||||
/**@brief Get an event from the pending events queue.
|
||||
*
|
||||
* @param[out] p_dest Pointer to buffer to be filled in with an event, or NULL to retrieve the event length.
|
||||
* This buffer <b>must be aligned to the extend defined by @ref BLE_EVT_PTR_ALIGNMENT</b>.
|
||||
* The buffer should be interpreted as a @ref ble_evt_t struct.
|
||||
* @param[in, out] p_len Pointer the length of the buffer, on return it is filled with the event length.
|
||||
*
|
||||
* @details This call allows the application to pull a BLE event from the BLE stack. The application is signaled that
|
||||
* an event is available from the BLE stack by the triggering of the SD_EVT_IRQn interrupt.
|
||||
* The application is free to choose whether to call this function from thread mode (main context) or directly from the
|
||||
* Interrupt Service Routine that maps to SD_EVT_IRQn. In any case however, and because the BLE stack runs at a higher
|
||||
* priority than the application, this function should be called in a loop (until @ref NRF_ERROR_NOT_FOUND is returned)
|
||||
* every time SD_EVT_IRQn is raised to ensure that all available events are pulled from the BLE stack. Failure to do so
|
||||
* could potentially leave events in the internal queue without the application being aware of this fact.
|
||||
*
|
||||
* Sizing the p_dest buffer is equally important, since the application needs to provide all the memory necessary for the event to
|
||||
* be copied into application memory. If the buffer provided is not large enough to fit the entire contents of the event,
|
||||
* @ref NRF_ERROR_DATA_SIZE will be returned and the application can then call again with a larger buffer size.
|
||||
* The maximum possible event length is defined by @ref BLE_EVT_LEN_MAX. The application may also "peek" the event length
|
||||
* by providing p_dest as a NULL pointer and inspecting the value of *p_len upon return:
|
||||
*
|
||||
* \code
|
||||
* uint16_t len;
|
||||
* errcode = sd_ble_evt_get(NULL, &len);
|
||||
* \endcode
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_COMMON_IRQ_EVT_MSC}
|
||||
* @mmsc{@ref BLE_COMMON_THREAD_EVT_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Event pulled and stored into the supplied buffer.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied.
|
||||
* @retval ::NRF_ERROR_NOT_FOUND No events ready to be pulled.
|
||||
* @retval ::NRF_ERROR_DATA_SIZE Event ready but could not fit into the supplied buffer.
|
||||
*/
|
||||
SVCALL(SD_BLE_EVT_GET, uint32_t, sd_ble_evt_get(uint8_t *p_dest, uint16_t *p_len));
|
||||
|
||||
|
||||
/**@brief Add a Vendor Specific base UUID.
|
||||
*
|
||||
* @details This call enables the application to add a vendor specific base UUID to the BLE stack's table, for later
|
||||
* use with all other modules and APIs. This then allows the application to use the shorter, 24-bit @ref ble_uuid_t
|
||||
* format when dealing with both 16-bit and 128-bit UUIDs without having to check for lengths and having split code
|
||||
* paths. This is accomplished by extending the grouping mechanism that the Bluetooth SIG standard base UUID uses
|
||||
* for all other 128-bit UUIDs. The type field in the @ref ble_uuid_t structure is an index (relative to
|
||||
* @ref BLE_UUID_TYPE_VENDOR_BEGIN) to the table populated by multiple calls to this function, and the UUID field
|
||||
* in the same structure contains the 2 bytes at indexes 12 and 13. The number of possible 128-bit UUIDs available to
|
||||
* the application is therefore the number of Vendor Specific UUIDs added with the help of this function times 65536,
|
||||
* although restricted to modifying bytes 12 and 13 for each of the entries in the supplied array.
|
||||
*
|
||||
* @note Bytes 12 and 13 of the provided UUID will not be used internally, since those are always replaced by
|
||||
* the 16-bit uuid field in @ref ble_uuid_t.
|
||||
*
|
||||
* @note If a UUID is already present in the BLE stack's internal table, the corresponding index will be returned in
|
||||
* p_uuid_type along with an NRF_SUCCESS error code.
|
||||
*
|
||||
* @param[in] p_vs_uuid Pointer to a 16-octet (128-bit) little endian Vendor Specific UUID disregarding
|
||||
* bytes 12 and 13.
|
||||
* @param[out] p_uuid_type Pointer to a uint8_t where the type field in @ref ble_uuid_t corresponding to this UUID will be stored.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully added the Vendor Specific UUID.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR If p_vs_uuid or p_uuid_type is NULL or invalid.
|
||||
* @retval ::NRF_ERROR_NO_MEM If there are no more free slots for VS UUIDs.
|
||||
*/
|
||||
SVCALL(SD_BLE_UUID_VS_ADD, uint32_t, sd_ble_uuid_vs_add(ble_uuid128_t const *p_vs_uuid, uint8_t *p_uuid_type));
|
||||
|
||||
|
||||
/** @brief Decode little endian raw UUID bytes (16-bit or 128-bit) into a 24 bit @ref ble_uuid_t structure.
|
||||
*
|
||||
* @details The raw UUID bytes excluding bytes 12 and 13 (i.e. bytes 0-11 and 14-15) of p_uuid_le are compared
|
||||
* to the corresponding ones in each entry of the table of vendor specific UUIDs populated with @ref sd_ble_uuid_vs_add
|
||||
* to look for a match. If there is such a match, bytes 12 and 13 are returned as p_uuid->uuid and the index
|
||||
* relative to @ref BLE_UUID_TYPE_VENDOR_BEGIN as p_uuid->type.
|
||||
*
|
||||
* @note If the UUID length supplied is 2, then the type set by this call will always be @ref BLE_UUID_TYPE_BLE.
|
||||
*
|
||||
* @param[in] uuid_le_len Length in bytes of the buffer pointed to by p_uuid_le (must be 2 or 16 bytes).
|
||||
* @param[in] p_uuid_le Pointer pointing to little endian raw UUID bytes.
|
||||
* @param[out] p_uuid Pointer to a @ref ble_uuid_t structure to be filled in.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully decoded into the @ref ble_uuid_t structure.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_LENGTH Invalid UUID length.
|
||||
* @retval ::NRF_ERROR_NOT_FOUND For a 128-bit UUID, no match in the populated table of UUIDs.
|
||||
*/
|
||||
SVCALL(SD_BLE_UUID_DECODE, uint32_t, sd_ble_uuid_decode(uint8_t uuid_le_len, uint8_t const *p_uuid_le, ble_uuid_t *p_uuid));
|
||||
|
||||
|
||||
/** @brief Encode a @ref ble_uuid_t structure into little endian raw UUID bytes (16-bit or 128-bit).
|
||||
*
|
||||
* @note The pointer to the destination buffer p_uuid_le may be NULL, in which case only the validity and size of p_uuid is computed.
|
||||
*
|
||||
* @param[in] p_uuid Pointer to a @ref ble_uuid_t structure that will be encoded into bytes.
|
||||
* @param[out] p_uuid_le_len Pointer to a uint8_t that will be filled with the encoded length (2 or 16 bytes).
|
||||
* @param[out] p_uuid_le Pointer to a buffer where the little endian raw UUID bytes (2 or 16) will be stored.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully encoded into the buffer.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid UUID type.
|
||||
*/
|
||||
SVCALL(SD_BLE_UUID_ENCODE, uint32_t, sd_ble_uuid_encode(ble_uuid_t const *p_uuid, uint8_t *p_uuid_le_len, uint8_t *p_uuid_le));
|
||||
|
||||
|
||||
/**@brief Get Version Information.
|
||||
*
|
||||
* @details This call allows the application to get the BLE stack version information.
|
||||
*
|
||||
* @param[out] p_version Pointer to a ble_version_t structure to be filled in.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Version information stored successfully.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_BUSY The BLE stack is busy (typically doing a locally-initiated disconnection procedure).
|
||||
*/
|
||||
SVCALL(SD_BLE_VERSION_GET, uint32_t, sd_ble_version_get(ble_version_t *p_version));
|
||||
|
||||
|
||||
/**@brief Provide a user memory block.
|
||||
*
|
||||
* @note This call can only be used as a response to a @ref BLE_EVT_USER_MEM_REQUEST event issued to the application.
|
||||
*
|
||||
* @param[in] conn_handle Connection handle.
|
||||
* @param[in] p_block Pointer to a user memory block structure or NULL if memory is managed by the application.
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_PEER_CANCEL_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_AUTH_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_AUTH_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_NOAUTH_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully queued a response to the peer.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_LENGTH Invalid user memory block length supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid Connection state or no user memory request pending.
|
||||
*/
|
||||
SVCALL(SD_BLE_USER_MEM_REPLY, uint32_t, sd_ble_user_mem_reply(uint16_t conn_handle, ble_user_mem_block_t const *p_block));
|
||||
|
||||
/**@brief Set a BLE option.
|
||||
*
|
||||
* @details This call allows the application to set the value of an option.
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GAP_PERIPH_BONDING_STATIC_PK_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] opt_id Option ID, see @ref BLE_COMMON_OPTS and @ref BLE_GAP_OPTS.
|
||||
* @param[in] p_opt Pointer to a ble_opt_t structure containing the option value.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Option set successfully.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Unable to set the parameter at this time.
|
||||
* @retval ::NRF_ERROR_BUSY The BLE stack is busy or the previous procedure has not completed.
|
||||
*/
|
||||
SVCALL(SD_BLE_OPT_SET, uint32_t, sd_ble_opt_set(uint32_t opt_id, ble_opt_t const *p_opt));
|
||||
|
||||
|
||||
/**@brief Get a BLE option.
|
||||
*
|
||||
* @details This call allows the application to retrieve the value of an option.
|
||||
*
|
||||
* @param[in] opt_id Option ID, see @ref BLE_COMMON_OPTS and @ref BLE_GAP_OPTS.
|
||||
* @param[out] p_opt Pointer to a ble_opt_t structure to be filled in.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Option retrieved successfully.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Unable to retrieve the parameter at this time.
|
||||
* @retval ::NRF_ERROR_BUSY The BLE stack is busy or the previous procedure has not completed.
|
||||
* @retval ::NRF_ERROR_NOT_SUPPORTED This option is not supported.
|
||||
*
|
||||
*/
|
||||
SVCALL(SD_BLE_OPT_GET, uint32_t, sd_ble_opt_get(uint32_t opt_id, ble_opt_t *p_opt));
|
||||
|
||||
/** @} */
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /* BLE_H__ */
|
||||
|
||||
/**
|
||||
@}
|
||||
@}
|
||||
*/
|
|
@ -1,91 +0,0 @@
|
|||
/*
|
||||
* Copyright (c) 2012 - 2017, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
@addtogroup BLE_COMMON
|
||||
@{
|
||||
@addtogroup nrf_error
|
||||
@{
|
||||
@ingroup BLE_COMMON
|
||||
@}
|
||||
|
||||
@defgroup ble_err General error codes
|
||||
@{
|
||||
|
||||
@brief General error code definitions for the BLE API.
|
||||
|
||||
@ingroup BLE_COMMON
|
||||
*/
|
||||
#ifndef NRF_BLE_ERR_H__
|
||||
#define NRF_BLE_ERR_H__
|
||||
|
||||
#include "nrf_error.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* @defgroup BLE_ERRORS Error Codes
|
||||
* @{ */
|
||||
#define BLE_ERROR_NOT_ENABLED (NRF_ERROR_STK_BASE_NUM+0x001) /**< @ref sd_ble_enable has not been called. */
|
||||
#define BLE_ERROR_INVALID_CONN_HANDLE (NRF_ERROR_STK_BASE_NUM+0x002) /**< Invalid connection handle. */
|
||||
#define BLE_ERROR_INVALID_ATTR_HANDLE (NRF_ERROR_STK_BASE_NUM+0x003) /**< Invalid attribute handle. */
|
||||
#define BLE_ERROR_INVALID_ROLE (NRF_ERROR_STK_BASE_NUM+0x004) /**< Invalid role. */
|
||||
/** @} */
|
||||
|
||||
|
||||
/** @defgroup BLE_ERROR_SUBRANGES Module specific error code subranges
|
||||
* @brief Assignment of subranges for module specific error codes.
|
||||
* @note For specific error codes, see ble_<module>.h or ble_error_<module>.h.
|
||||
* @{ */
|
||||
#define NRF_L2CAP_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x100) /**< L2CAP specific errors. */
|
||||
#define NRF_GAP_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x200) /**< GAP specific errors. */
|
||||
#define NRF_GATTC_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x300) /**< GATT client specific errors. */
|
||||
#define NRF_GATTS_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x400) /**< GATT server specific errors. */
|
||||
/** @} */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
@}
|
||||
@}
|
||||
*/
|
File diff suppressed because it is too large
Load Diff
|
@ -1,223 +0,0 @@
|
|||
/*
|
||||
* Copyright (c) 2013 - 2017, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
@addtogroup BLE_GATT Generic Attribute Profile (GATT) Common
|
||||
@{
|
||||
@brief Common definitions and prototypes for the GATT interfaces.
|
||||
*/
|
||||
|
||||
#ifndef BLE_GATT_H__
|
||||
#define BLE_GATT_H__
|
||||
|
||||
#include "ble_types.h"
|
||||
#include "ble_ranges.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup BLE_GATT_DEFINES Defines
|
||||
* @{ */
|
||||
|
||||
/** @brief Default ATT MTU, in bytes. */
|
||||
#define BLE_GATT_ATT_MTU_DEFAULT 23
|
||||
|
||||
/**@brief Invalid Attribute Handle. */
|
||||
#define BLE_GATT_HANDLE_INVALID 0x0000
|
||||
|
||||
/**@brief First Attribute Handle. */
|
||||
#define BLE_GATT_HANDLE_START 0x0001
|
||||
|
||||
/**@brief Last Attribute Handle. */
|
||||
#define BLE_GATT_HANDLE_END 0xFFFF
|
||||
|
||||
/** @defgroup BLE_GATT_TIMEOUT_SOURCES GATT Timeout sources
|
||||
* @{ */
|
||||
#define BLE_GATT_TIMEOUT_SRC_PROTOCOL 0x00 /**< ATT Protocol timeout. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATT_WRITE_OPS GATT Write operations
|
||||
* @{ */
|
||||
#define BLE_GATT_OP_INVALID 0x00 /**< Invalid Operation. */
|
||||
#define BLE_GATT_OP_WRITE_REQ 0x01 /**< Write Request. */
|
||||
#define BLE_GATT_OP_WRITE_CMD 0x02 /**< Write Command. */
|
||||
#define BLE_GATT_OP_SIGN_WRITE_CMD 0x03 /**< Signed Write Command. */
|
||||
#define BLE_GATT_OP_PREP_WRITE_REQ 0x04 /**< Prepare Write Request. */
|
||||
#define BLE_GATT_OP_EXEC_WRITE_REQ 0x05 /**< Execute Write Request. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATT_EXEC_WRITE_FLAGS GATT Execute Write flags
|
||||
* @{ */
|
||||
#define BLE_GATT_EXEC_WRITE_FLAG_PREPARED_CANCEL 0x00 /**< Cancel prepared write. */
|
||||
#define BLE_GATT_EXEC_WRITE_FLAG_PREPARED_WRITE 0x01 /**< Execute prepared write. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATT_HVX_TYPES GATT Handle Value operations
|
||||
* @{ */
|
||||
#define BLE_GATT_HVX_INVALID 0x00 /**< Invalid Operation. */
|
||||
#define BLE_GATT_HVX_NOTIFICATION 0x01 /**< Handle Value Notification. */
|
||||
#define BLE_GATT_HVX_INDICATION 0x02 /**< Handle Value Indication. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATT_STATUS_CODES GATT Status Codes
|
||||
* @{ */
|
||||
#define BLE_GATT_STATUS_SUCCESS 0x0000 /**< Success. */
|
||||
#define BLE_GATT_STATUS_UNKNOWN 0x0001 /**< Unknown or not applicable status. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INVALID 0x0100 /**< ATT Error: Invalid Error Code. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INVALID_HANDLE 0x0101 /**< ATT Error: Invalid Attribute Handle. */
|
||||
#define BLE_GATT_STATUS_ATTERR_READ_NOT_PERMITTED 0x0102 /**< ATT Error: Read not permitted. */
|
||||
#define BLE_GATT_STATUS_ATTERR_WRITE_NOT_PERMITTED 0x0103 /**< ATT Error: Write not permitted. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INVALID_PDU 0x0104 /**< ATT Error: Used in ATT as Invalid PDU. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INSUF_AUTHENTICATION 0x0105 /**< ATT Error: Authenticated link required. */
|
||||
#define BLE_GATT_STATUS_ATTERR_REQUEST_NOT_SUPPORTED 0x0106 /**< ATT Error: Used in ATT as Request Not Supported. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INVALID_OFFSET 0x0107 /**< ATT Error: Offset specified was past the end of the attribute. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INSUF_AUTHORIZATION 0x0108 /**< ATT Error: Used in ATT as Insufficient Authorization. */
|
||||
#define BLE_GATT_STATUS_ATTERR_PREPARE_QUEUE_FULL 0x0109 /**< ATT Error: Used in ATT as Prepare Queue Full. */
|
||||
#define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_FOUND 0x010A /**< ATT Error: Used in ATT as Attribute not found. */
|
||||
#define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_LONG 0x010B /**< ATT Error: Attribute cannot be read or written using read/write blob requests. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INSUF_ENC_KEY_SIZE 0x010C /**< ATT Error: Encryption key size used is insufficient. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INVALID_ATT_VAL_LENGTH 0x010D /**< ATT Error: Invalid value size. */
|
||||
#define BLE_GATT_STATUS_ATTERR_UNLIKELY_ERROR 0x010E /**< ATT Error: Very unlikely error. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INSUF_ENCRYPTION 0x010F /**< ATT Error: Encrypted link required. */
|
||||
#define BLE_GATT_STATUS_ATTERR_UNSUPPORTED_GROUP_TYPE 0x0110 /**< ATT Error: Attribute type is not a supported grouping attribute. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INSUF_RESOURCES 0x0111 /**< ATT Error: Encrypted link required. */
|
||||
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_BEGIN 0x0112 /**< ATT Error: Reserved for Future Use range #1 begin. */
|
||||
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_END 0x017F /**< ATT Error: Reserved for Future Use range #1 end. */
|
||||
#define BLE_GATT_STATUS_ATTERR_APP_BEGIN 0x0180 /**< ATT Error: Application range begin. */
|
||||
#define BLE_GATT_STATUS_ATTERR_APP_END 0x019F /**< ATT Error: Application range end. */
|
||||
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_BEGIN 0x01A0 /**< ATT Error: Reserved for Future Use range #2 begin. */
|
||||
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_END 0x01DF /**< ATT Error: Reserved for Future Use range #2 end. */
|
||||
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_BEGIN 0x01E0 /**< ATT Error: Reserved for Future Use range #3 begin. */
|
||||
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_END 0x01FC /**< ATT Error: Reserved for Future Use range #3 end. */
|
||||
#define BLE_GATT_STATUS_ATTERR_CPS_CCCD_CONFIG_ERROR 0x01FD /**< ATT Common Profile and Service Error: Client Characteristic Configuration Descriptor improperly configured. */
|
||||
#define BLE_GATT_STATUS_ATTERR_CPS_PROC_ALR_IN_PROG 0x01FE /**< ATT Common Profile and Service Error: Procedure Already in Progress. */
|
||||
#define BLE_GATT_STATUS_ATTERR_CPS_OUT_OF_RANGE 0x01FF /**< ATT Common Profile and Service Error: Out Of Range. */
|
||||
/** @} */
|
||||
|
||||
|
||||
/** @defgroup BLE_GATT_CPF_FORMATS Characteristic Presentation Formats
|
||||
* @note Found at http://developer.bluetooth.org/gatt/descriptors/Pages/DescriptorViewer.aspx?u=org.bluetooth.descriptor.gatt.characteristic_presentation_format.xml
|
||||
* @{ */
|
||||
#define BLE_GATT_CPF_FORMAT_RFU 0x00 /**< Reserved For Future Use. */
|
||||
#define BLE_GATT_CPF_FORMAT_BOOLEAN 0x01 /**< Boolean. */
|
||||
#define BLE_GATT_CPF_FORMAT_2BIT 0x02 /**< Unsigned 2-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_NIBBLE 0x03 /**< Unsigned 4-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_UINT8 0x04 /**< Unsigned 8-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_UINT12 0x05 /**< Unsigned 12-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_UINT16 0x06 /**< Unsigned 16-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_UINT24 0x07 /**< Unsigned 24-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_UINT32 0x08 /**< Unsigned 32-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_UINT48 0x09 /**< Unsigned 48-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_UINT64 0x0A /**< Unsigned 64-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_UINT128 0x0B /**< Unsigned 128-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_SINT8 0x0C /**< Signed 2-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_SINT12 0x0D /**< Signed 12-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_SINT16 0x0E /**< Signed 16-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_SINT24 0x0F /**< Signed 24-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_SINT32 0x10 /**< Signed 32-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_SINT48 0x11 /**< Signed 48-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_SINT64 0x12 /**< Signed 64-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_SINT128 0x13 /**< Signed 128-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_FLOAT32 0x14 /**< IEEE-754 32-bit floating point. */
|
||||
#define BLE_GATT_CPF_FORMAT_FLOAT64 0x15 /**< IEEE-754 64-bit floating point. */
|
||||
#define BLE_GATT_CPF_FORMAT_SFLOAT 0x16 /**< IEEE-11073 16-bit SFLOAT. */
|
||||
#define BLE_GATT_CPF_FORMAT_FLOAT 0x17 /**< IEEE-11073 32-bit FLOAT. */
|
||||
#define BLE_GATT_CPF_FORMAT_DUINT16 0x18 /**< IEEE-20601 format. */
|
||||
#define BLE_GATT_CPF_FORMAT_UTF8S 0x19 /**< UTF-8 string. */
|
||||
#define BLE_GATT_CPF_FORMAT_UTF16S 0x1A /**< UTF-16 string. */
|
||||
#define BLE_GATT_CPF_FORMAT_STRUCT 0x1B /**< Opaque Structure. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATT_CPF_NAMESPACES GATT Bluetooth Namespaces
|
||||
* @{
|
||||
*/
|
||||
#define BLE_GATT_CPF_NAMESPACE_BTSIG 0x01 /**< Bluetooth SIG defined Namespace. */
|
||||
#define BLE_GATT_CPF_NAMESPACE_DESCRIPTION_UNKNOWN 0x0000 /**< Namespace Description Unknown. */
|
||||
/** @} */
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup BLE_GATT_STRUCTURES Structures
|
||||
* @{ */
|
||||
|
||||
/**
|
||||
* @brief BLE GATT connection configuration parameters, set with @ref sd_ble_cfg_set.
|
||||
*
|
||||
* @retval NRF_ERROR_INVALID_PARAM att_mtu is smaller than @ref BLE_GATT_ATT_MTU_DEFAULT.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint16_t att_mtu; /**< Maximum size of ATT packet the SoftDevice can send or receive.
|
||||
The default and minimum value is @ref BLE_GATT_ATT_MTU_DEFAULT.
|
||||
@mscs
|
||||
@mmsc{@ref BLE_GATTC_MTU_EXCHANGE}
|
||||
@mmsc{@ref BLE_GATTS_MTU_EXCHANGE}
|
||||
@endmscs
|
||||
*/
|
||||
} ble_gatt_conn_cfg_t;
|
||||
|
||||
/**@brief GATT Characteristic Properties. */
|
||||
typedef struct
|
||||
{
|
||||
/* Standard properties */
|
||||
uint8_t broadcast :1; /**< Broadcasting of the value permitted. */
|
||||
uint8_t read :1; /**< Reading the value permitted. */
|
||||
uint8_t write_wo_resp :1; /**< Writing the value with Write Command permitted. */
|
||||
uint8_t write :1; /**< Writing the value with Write Request permitted. */
|
||||
uint8_t notify :1; /**< Notification of the value permitted. */
|
||||
uint8_t indicate :1; /**< Indications of the value permitted. */
|
||||
uint8_t auth_signed_wr :1; /**< Writing the value with Signed Write Command permitted. */
|
||||
} ble_gatt_char_props_t;
|
||||
|
||||
/**@brief GATT Characteristic Extended Properties. */
|
||||
typedef struct
|
||||
{
|
||||
/* Extended properties */
|
||||
uint8_t reliable_wr :1; /**< Writing the value with Queued Write operations permitted. */
|
||||
uint8_t wr_aux :1; /**< Writing the Characteristic User Description descriptor permitted. */
|
||||
} ble_gatt_char_ext_props_t;
|
||||
|
||||
/** @} */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif // BLE_GATT_H__
|
||||
|
||||
/** @} */
|
|
@ -1,702 +0,0 @@
|
|||
/*
|
||||
* Copyright (c) 2011 - 2017, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
@addtogroup BLE_GATTC Generic Attribute Profile (GATT) Client
|
||||
@{
|
||||
@brief Definitions and prototypes for the GATT Client interface.
|
||||
*/
|
||||
|
||||
#ifndef BLE_GATTC_H__
|
||||
#define BLE_GATTC_H__
|
||||
|
||||
#include "ble_gatt.h"
|
||||
#include "ble_types.h"
|
||||
#include "ble_ranges.h"
|
||||
#include "nrf_svc.h"
|
||||
#include "nrf_error.h"
|
||||
#include "nrf.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup BLE_GATTC_ENUMERATIONS Enumerations
|
||||
* @{ */
|
||||
|
||||
/**@brief GATTC API SVC numbers. */
|
||||
enum BLE_GATTC_SVCS
|
||||
{
|
||||
SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER = BLE_GATTC_SVC_BASE, /**< Primary Service Discovery. */
|
||||
SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, /**< Relationship Discovery. */
|
||||
SD_BLE_GATTC_CHARACTERISTICS_DISCOVER, /**< Characteristic Discovery. */
|
||||
SD_BLE_GATTC_DESCRIPTORS_DISCOVER, /**< Characteristic Descriptor Discovery. */
|
||||
SD_BLE_GATTC_ATTR_INFO_DISCOVER, /**< Attribute Information Discovery. */
|
||||
SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ, /**< Read Characteristic Value by UUID. */
|
||||
SD_BLE_GATTC_READ, /**< Generic read. */
|
||||
SD_BLE_GATTC_CHAR_VALUES_READ, /**< Read multiple Characteristic Values. */
|
||||
SD_BLE_GATTC_WRITE, /**< Generic write. */
|
||||
SD_BLE_GATTC_HV_CONFIRM, /**< Handle Value Confirmation. */
|
||||
SD_BLE_GATTC_EXCHANGE_MTU_REQUEST, /**< Exchange MTU Request. */
|
||||
};
|
||||
|
||||
/**
|
||||
* @brief GATT Client Event IDs.
|
||||
*/
|
||||
enum BLE_GATTC_EVTS
|
||||
{
|
||||
BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP = BLE_GATTC_EVT_BASE, /**< Primary Service Discovery Response event. \n See @ref ble_gattc_evt_prim_srvc_disc_rsp_t. */
|
||||
BLE_GATTC_EVT_REL_DISC_RSP, /**< Relationship Discovery Response event. \n See @ref ble_gattc_evt_rel_disc_rsp_t. */
|
||||
BLE_GATTC_EVT_CHAR_DISC_RSP, /**< Characteristic Discovery Response event. \n See @ref ble_gattc_evt_char_disc_rsp_t. */
|
||||
BLE_GATTC_EVT_DESC_DISC_RSP, /**< Descriptor Discovery Response event. \n See @ref ble_gattc_evt_desc_disc_rsp_t. */
|
||||
BLE_GATTC_EVT_ATTR_INFO_DISC_RSP, /**< Attribute Information Response event. \n See @ref ble_gattc_evt_attr_info_disc_rsp_t. */
|
||||
BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP, /**< Read By UUID Response event. \n See @ref ble_gattc_evt_char_val_by_uuid_read_rsp_t. */
|
||||
BLE_GATTC_EVT_READ_RSP, /**< Read Response event. \n See @ref ble_gattc_evt_read_rsp_t. */
|
||||
BLE_GATTC_EVT_CHAR_VALS_READ_RSP, /**< Read multiple Response event. \n See @ref ble_gattc_evt_char_vals_read_rsp_t. */
|
||||
BLE_GATTC_EVT_WRITE_RSP, /**< Write Response event. \n See @ref ble_gattc_evt_write_rsp_t. */
|
||||
BLE_GATTC_EVT_HVX, /**< Handle Value Notification or Indication event. \n Confirm indication with @ref sd_ble_gattc_hv_confirm. \n See @ref ble_gattc_evt_hvx_t. */
|
||||
BLE_GATTC_EVT_EXCHANGE_MTU_RSP, /**< Exchange MTU Response event. \n See @ref ble_gattc_evt_exchange_mtu_rsp_t. */
|
||||
BLE_GATTC_EVT_TIMEOUT, /**< Timeout event. \n See @ref ble_gattc_evt_timeout_t. */
|
||||
BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE /**< Write without Response transmission complete. \n See @ref ble_gattc_evt_write_cmd_tx_complete_t. */
|
||||
};
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup BLE_GATTC_DEFINES Defines
|
||||
* @{ */
|
||||
|
||||
/** @defgroup BLE_ERRORS_GATTC SVC return values specific to GATTC
|
||||
* @{ */
|
||||
#define BLE_ERROR_GATTC_PROC_NOT_PERMITTED (NRF_GATTC_ERR_BASE + 0x000) /**< Procedure not Permitted. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATTC_ATTR_INFO_FORMAT Attribute Information Formats
|
||||
* @{ */
|
||||
#define BLE_GATTC_ATTR_INFO_FORMAT_16BIT 1 /**< 16-bit Attribute Information Format. */
|
||||
#define BLE_GATTC_ATTR_INFO_FORMAT_128BIT 2 /**< 128-bit Attribute Information Format. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATTC_DEFAULTS GATT Client defaults
|
||||
* @{ */
|
||||
#define BLE_GATTC_WRITE_CMD_TX_QUEUE_SIZE_DEFAULT 1 /**< Default number of Write without Response that can be queued for transmission. */
|
||||
/** @} */
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup BLE_GATTC_STRUCTURES Structures
|
||||
* @{ */
|
||||
|
||||
/**
|
||||
* @brief BLE GATTC connection configuration parameters, set with @ref sd_ble_cfg_set.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t write_cmd_tx_queue_size; /**< The guaranteed minimum number of Write without Response that can be queued for transmission.
|
||||
The default value is @ref BLE_GATTC_WRITE_CMD_TX_QUEUE_SIZE_DEFAULT */
|
||||
} ble_gattc_conn_cfg_t;
|
||||
|
||||
/**@brief Operation Handle Range. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t start_handle; /**< Start Handle. */
|
||||
uint16_t end_handle; /**< End Handle. */
|
||||
} ble_gattc_handle_range_t;
|
||||
|
||||
|
||||
/**@brief GATT service. */
|
||||
typedef struct
|
||||
{
|
||||
ble_uuid_t uuid; /**< Service UUID. */
|
||||
ble_gattc_handle_range_t handle_range; /**< Service Handle Range. */
|
||||
} ble_gattc_service_t;
|
||||
|
||||
|
||||
/**@brief GATT include. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Include Handle. */
|
||||
ble_gattc_service_t included_srvc; /**< Handle of the included service. */
|
||||
} ble_gattc_include_t;
|
||||
|
||||
|
||||
/**@brief GATT characteristic. */
|
||||
typedef struct
|
||||
{
|
||||
ble_uuid_t uuid; /**< Characteristic UUID. */
|
||||
ble_gatt_char_props_t char_props; /**< Characteristic Properties. */
|
||||
uint8_t char_ext_props : 1; /**< Extended properties present. */
|
||||
uint16_t handle_decl; /**< Handle of the Characteristic Declaration. */
|
||||
uint16_t handle_value; /**< Handle of the Characteristic Value. */
|
||||
} ble_gattc_char_t;
|
||||
|
||||
|
||||
/**@brief GATT descriptor. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Descriptor Handle. */
|
||||
ble_uuid_t uuid; /**< Descriptor UUID. */
|
||||
} ble_gattc_desc_t;
|
||||
|
||||
|
||||
/**@brief Write Parameters. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t write_op; /**< Write Operation to be performed, see @ref BLE_GATT_WRITE_OPS. */
|
||||
uint8_t flags; /**< Flags, see @ref BLE_GATT_EXEC_WRITE_FLAGS. */
|
||||
uint16_t handle; /**< Handle to the attribute to be written. */
|
||||
uint16_t offset; /**< Offset in bytes. @note For WRITE_CMD and WRITE_REQ, offset must be 0. */
|
||||
uint16_t len; /**< Length of data in bytes. */
|
||||
uint8_t const *p_value; /**< Pointer to the value data. */
|
||||
} ble_gattc_write_params_t;
|
||||
|
||||
/**@brief Attribute Information for 16-bit Attribute UUID. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Attribute handle. */
|
||||
ble_uuid_t uuid; /**< 16-bit Attribute UUID. */
|
||||
} ble_gattc_attr_info16_t;
|
||||
|
||||
/**@brief Attribute Information for 128-bit Attribute UUID. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Attribute handle. */
|
||||
ble_uuid128_t uuid; /**< 128-bit Attribute UUID. */
|
||||
} ble_gattc_attr_info128_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t count; /**< Service count. */
|
||||
ble_gattc_service_t services[1]; /**< Service data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gattc_evt_prim_srvc_disc_rsp_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_REL_DISC_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t count; /**< Include count. */
|
||||
ble_gattc_include_t includes[1]; /**< Include data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gattc_evt_rel_disc_rsp_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_DISC_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t count; /**< Characteristic count. */
|
||||
ble_gattc_char_t chars[1]; /**< Characteristic data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gattc_evt_char_disc_rsp_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_DESC_DISC_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t count; /**< Descriptor count. */
|
||||
ble_gattc_desc_t descs[1]; /**< Descriptor data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gattc_evt_desc_disc_rsp_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_ATTR_INFO_DISC_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t count; /**< Attribute count. */
|
||||
uint8_t format; /**< Attribute information format, see @ref BLE_GATTC_ATTR_INFO_FORMAT. */
|
||||
union {
|
||||
ble_gattc_attr_info16_t attr_info16[1]; /**< Attribute information for 16-bit Attribute UUID.
|
||||
@note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
ble_gattc_attr_info128_t attr_info128[1]; /**< Attribute information for 128-bit Attribute UUID.
|
||||
@note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} info; /**< Attribute information union. */
|
||||
} ble_gattc_evt_attr_info_disc_rsp_t;
|
||||
|
||||
/**@brief GATT read by UUID handle value pair. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Attribute Handle. */
|
||||
uint8_t *p_value; /**< Pointer to the Attribute Value, length is available in @ref ble_gattc_evt_char_val_by_uuid_read_rsp_t::value_len. */
|
||||
} ble_gattc_handle_value_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t count; /**< Handle-Value Pair Count. */
|
||||
uint16_t value_len; /**< Length of the value in Handle-Value(s) list. */
|
||||
uint8_t handle_value[1]; /**< Handle-Value(s) list. To iterate through the list use @ref sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter.
|
||||
@note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gattc_evt_char_val_by_uuid_read_rsp_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_READ_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Attribute Handle. */
|
||||
uint16_t offset; /**< Offset of the attribute data. */
|
||||
uint16_t len; /**< Attribute data length. */
|
||||
uint8_t data[1]; /**< Attribute data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gattc_evt_read_rsp_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_VALS_READ_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t len; /**< Concatenated Attribute values length. */
|
||||
uint8_t values[1]; /**< Attribute values. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gattc_evt_char_vals_read_rsp_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_WRITE_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Attribute Handle. */
|
||||
uint8_t write_op; /**< Type of write operation, see @ref BLE_GATT_WRITE_OPS. */
|
||||
uint16_t offset; /**< Data offset. */
|
||||
uint16_t len; /**< Data length. */
|
||||
uint8_t data[1]; /**< Data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gattc_evt_write_rsp_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_HVX. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Handle to which the HVx operation applies. */
|
||||
uint8_t type; /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */
|
||||
uint16_t len; /**< Attribute data length. */
|
||||
uint8_t data[1]; /**< Attribute data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gattc_evt_hvx_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t server_rx_mtu; /**< Server RX MTU size. */
|
||||
} ble_gattc_evt_exchange_mtu_rsp_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_TIMEOUT. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t src; /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */
|
||||
} ble_gattc_evt_timeout_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t count; /**< Number of write without response transmissions completed. */
|
||||
} ble_gattc_evt_write_cmd_tx_complete_t;
|
||||
|
||||
/**@brief GATTC event structure. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t conn_handle; /**< Connection Handle on which event occurred. */
|
||||
uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */
|
||||
uint16_t error_handle; /**< In case of error: The handle causing the error. In all other cases @ref BLE_GATT_HANDLE_INVALID. */
|
||||
union
|
||||
{
|
||||
ble_gattc_evt_prim_srvc_disc_rsp_t prim_srvc_disc_rsp; /**< Primary Service Discovery Response Event Parameters. */
|
||||
ble_gattc_evt_rel_disc_rsp_t rel_disc_rsp; /**< Relationship Discovery Response Event Parameters. */
|
||||
ble_gattc_evt_char_disc_rsp_t char_disc_rsp; /**< Characteristic Discovery Response Event Parameters. */
|
||||
ble_gattc_evt_desc_disc_rsp_t desc_disc_rsp; /**< Descriptor Discovery Response Event Parameters. */
|
||||
ble_gattc_evt_char_val_by_uuid_read_rsp_t char_val_by_uuid_read_rsp; /**< Characteristic Value Read by UUID Response Event Parameters. */
|
||||
ble_gattc_evt_read_rsp_t read_rsp; /**< Read Response Event Parameters. */
|
||||
ble_gattc_evt_char_vals_read_rsp_t char_vals_read_rsp; /**< Characteristic Values Read Response Event Parameters. */
|
||||
ble_gattc_evt_write_rsp_t write_rsp; /**< Write Response Event Parameters. */
|
||||
ble_gattc_evt_hvx_t hvx; /**< Handle Value Notification/Indication Event Parameters. */
|
||||
ble_gattc_evt_exchange_mtu_rsp_t exchange_mtu_rsp; /**< Exchange MTU Response Event Parameters. */
|
||||
ble_gattc_evt_timeout_t timeout; /**< Timeout Event Parameters. */
|
||||
ble_gattc_evt_attr_info_disc_rsp_t attr_info_disc_rsp; /**< Attribute Information Discovery Event Parameters. */
|
||||
ble_gattc_evt_write_cmd_tx_complete_t write_cmd_tx_complete; /**< Write without Response transmission complete Event Parameters. */
|
||||
} params; /**< Event Parameters. @note Only valid if @ref gatt_status == @ref BLE_GATT_STATUS_SUCCESS. */
|
||||
} ble_gattc_evt_t;
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup BLE_GATTC_FUNCTIONS Functions
|
||||
* @{ */
|
||||
|
||||
/**@brief Initiate or continue a GATT Primary Service Discovery procedure.
|
||||
*
|
||||
* @details This function initiates or resumes a Primary Service discovery procedure, starting from the supplied handle.
|
||||
* If the last service has not been reached, this function must be called again with an updated start handle value to continue the search.
|
||||
*
|
||||
* @note If any of the discovered services have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with
|
||||
* type @ref BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event.
|
||||
*
|
||||
* @events
|
||||
* @event{@ref BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP}
|
||||
* @endevents
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTC_PRIM_SRVC_DISC_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
|
||||
* @param[in] start_handle Handle to start searching from.
|
||||
* @param[in] p_srvc_uuid Pointer to the service UUID to be found. If it is NULL, all primary services will be returned.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully started or resumed the Primary Service Discovery procedure.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
|
||||
* @retval ::NRF_ERROR_BUSY Client procedure already in progress.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER, uint32_t, sd_ble_gattc_primary_services_discover(uint16_t conn_handle, uint16_t start_handle, ble_uuid_t const *p_srvc_uuid));
|
||||
|
||||
|
||||
/**@brief Initiate or continue a GATT Relationship Discovery procedure.
|
||||
*
|
||||
* @details This function initiates or resumes the Find Included Services sub-procedure. If the last included service has not been reached,
|
||||
* this must be called again with an updated handle range to continue the search.
|
||||
*
|
||||
* @events
|
||||
* @event{@ref BLE_GATTC_EVT_REL_DISC_RSP}
|
||||
* @endevents
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTC_REL_DISC_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
|
||||
* @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully started or resumed the Relationship Discovery procedure.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
|
||||
* @retval ::NRF_ERROR_BUSY Client procedure already in progress.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, uint32_t, sd_ble_gattc_relationships_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range));
|
||||