objslice: take mp_obj_slice_indices from micropython

crypto-aes
Jeff Epler 3 years ago
parent 772ac705d3
commit 69aa010cfc
  1. 203
      locale/ID.po
  2. 203
      locale/circuitpython.pot
  3. 203
      locale/de_DE.po
  4. 203
      locale/en_US.po
  5. 203
      locale/en_x_pirate.po
  6. 203
      locale/es.po
  7. 203
      locale/fil.po
  8. 203
      locale/fr.po
  9. 203
      locale/it_IT.po
  10. 203
      locale/ko.po
  11. 203
      locale/pl.po
  12. 203
      locale/pt_BR.po
  13. 308
      locale/zh_Latn_pinyin.po
  14. 1
      py/obj.h
  15. 65
      py/objslice.c

@ -8,7 +8,7 @@ msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-03-11 17:52-0400\n"
"POT-Creation-Date: 2020-03-16 20:59-0500\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
@ -482,10 +482,6 @@ msgstr ""
msgid "Cannot unambiguously get sizeof scalar"
msgstr "tidak dapat mendapatkan ukuran scalar secara tidak ambigu"
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Cannot vary frequency on a timer that is already in use"
msgstr ""
#: shared-module/bitbangio/SPI.c
msgid "Cannot write without MOSI pin."
msgstr ""
@ -543,34 +539,6 @@ msgstr ""
msgid "Could not initialize UART"
msgstr "Tidak dapat menginisialisasi UART"
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Could not initialize channel"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Could not initialize timer"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Could not re-init channel"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Could not re-init timer"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Could not restart PWM"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Could not start PWM"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "Could not start interrupt, RX busy"
msgstr ""
#: shared-module/audiomp3/MP3Decoder.c
msgid "Couldn't allocate decoder"
msgstr ""
@ -593,14 +561,6 @@ msgstr ""
msgid "Crash into the HardFault_Handler."
msgstr ""
#: ports/stm32f4/common-hal/analogio/AnalogOut.c
msgid "DAC Channel Init Error"
msgstr ""
#: ports/stm32f4/common-hal/analogio/AnalogOut.c
msgid "DAC Device Init Error"
msgstr ""
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "DAC already in use"
msgstr "DAC sudah digunakan"
@ -709,7 +669,6 @@ msgstr "Gagal untuk mengalokasikan buffer RX"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/stm32f4/common-hal/pulseio/PulseIn.c
#, c-format
msgid "Failed to allocate RX buffer of %d bytes"
msgstr "Gagal untuk megalokasikan buffer RX dari %d byte"
@ -743,10 +702,6 @@ msgstr ""
msgid "Frequency captured is above capability. Capture Paused."
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Frequency must match existing PWMOut using this timer"
msgstr ""
#: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c
#: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c
msgid "Function requires lock"
@ -761,22 +716,10 @@ msgstr ""
msgid "Group full"
msgstr ""
#: ports/stm32f4/common-hal/busio/I2C.c ports/stm32f4/common-hal/busio/SPI.c
msgid "Hardware busy, try alternative pins"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "Hardware in use, try alternative pins"
msgstr ""
#: extmod/vfs_posix_file.c py/objstringio.c
msgid "I/O operation on closed file"
msgstr "operasi I/O pada file tertutup"
#: ports/stm32f4/common-hal/busio/I2C.c
msgid "I2C Init Error"
msgstr ""
#: extmod/machine_i2c.c
msgid "I2C operation not supported"
msgstr "operasi I2C tidak didukung"
@ -803,28 +746,16 @@ msgstr ""
msgid "Insufficient encryption"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "Internal define error"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Invalid %q pin"
msgstr "%q pada tidak valid"
#: ports/stm32f4/common-hal/analogio/AnalogIn.c
msgid "Invalid ADC Unit value"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
msgid "Invalid BMP file"
msgstr ""
#: ports/stm32f4/common-hal/analogio/AnalogOut.c
msgid "Invalid DAC pin supplied"
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm32f4/common-hal/busio/I2C.c
#: ports/mimxrt10xx/common-hal/busio/I2C.c
msgid "Invalid I2C pin selection"
msgstr ""
@ -834,12 +765,11 @@ msgstr ""
msgid "Invalid PWM frequency"
msgstr "Frekuensi PWM tidak valid"
#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm32f4/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/SPI.c
msgid "Invalid SPI pin selection"
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/UART.c
#: ports/stm32f4/common-hal/busio/UART.c
msgid "Invalid UART pin selection"
msgstr ""
@ -851,7 +781,7 @@ msgstr ""
msgid "Invalid bits per value"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c ports/stm32f4/common-hal/busio/UART.c
#: ports/nrf/common-hal/busio/UART.c
msgid "Invalid buffer size"
msgstr "Ukuran buffer tidak valid"
@ -879,10 +809,6 @@ msgstr ""
msgid "Invalid format chunk size"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Invalid frequency supplied"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Invalid memory access."
msgstr ""
@ -918,10 +844,6 @@ msgstr "Pin untuk channel kanan tidak valid"
msgid "Invalid pins"
msgstr "Pin-pin tidak valid"
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Invalid pins for PWMOut"
msgstr ""
#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
msgid "Invalid polarity"
msgstr ""
@ -950,10 +872,6 @@ msgstr ""
msgid "Invalid wave file"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "Invalid word/bit length"
msgstr ""
#: py/compile.c
msgid "LHS of keyword arg must be an id"
msgstr "LHS dari keyword arg harus menjadi sebuah id"
@ -999,18 +917,10 @@ msgstr ""
msgid "Microphone startup delay must be in range 0.0 to 1.0"
msgstr ""
#: ports/stm32f4/common-hal/busio/SPI.c
msgid "Missing MISO or MOSI Pin"
msgstr ""
#: shared-bindings/displayio/Group.c
msgid "Must be a %q subclass."
msgstr ""
#: ports/stm32f4/common-hal/busio/SPI.c
msgid "Must provide MISO or MOSI pin"
msgstr ""
#: py/parse.c
msgid "Name too long"
msgstr ""
@ -1024,7 +934,6 @@ msgid "No CCCD for this Characteristic"
msgstr ""
#: ports/atmel-samd/common-hal/analogio/AnalogOut.c
#: ports/stm32f4/common-hal/analogio/AnalogOut.c
msgid "No DAC on chip"
msgstr "Tidak ada DAC (Digital Analog Converter) di dalam chip"
@ -1033,23 +942,13 @@ msgstr "Tidak ada DAC (Digital Analog Converter) di dalam chip"
msgid "No DMA channel found"
msgstr "tidak ada channel DMA ditemukan"
#: ports/stm32f4/common-hal/busio/SPI.c
msgid "No MISO Pin"
msgstr ""
#: ports/stm32f4/common-hal/busio/SPI.c
msgid "No MOSI Pin"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/stm32f4/common-hal/busio/UART.c
msgid "No RX pin"
msgstr "Tidak pin RX"
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/stm32f4/common-hal/busio/UART.c
msgid "No TX pin"
msgstr "Tidak ada pin TX"
@ -1078,10 +977,6 @@ msgstr ""
msgid "No hardware support on pin"
msgstr "Tidak ada dukungan hardware untuk pin"
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "No more timers available on this pin."
msgstr ""
#: shared-module/touchio/TouchIn.c
msgid "No pulldown on pin; 1Mohm recommended"
msgstr ""
@ -1150,7 +1045,6 @@ msgid ""
msgstr ""
#: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
#: ports/stm32f4/common-hal/displayio/ParallelBus.c
msgid "ParallelBus not yet supported"
msgstr ""
@ -1162,14 +1056,9 @@ msgstr ""
#: ports/cxd56/common-hal/analogio/AnalogIn.c
#: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
#: ports/nrf/common-hal/analogio/AnalogIn.c
#: ports/stm32f4/common-hal/analogio/AnalogIn.c
msgid "Pin does not have ADC capabilities"
msgstr "Pin tidak mempunya kemampuan untuk ADC (Analog Digital Converter)"
#: ports/stm32f4/common-hal/pulseio/PulseIn.c
msgid "Pin number already reserved by EXTI"
msgstr ""
#: py/builtinhelp.c
msgid "Plus any modules on the filesystem\n"
msgstr "Tambahkan module apapun pada filesystem\n"
@ -1192,18 +1081,6 @@ msgstr ""
msgid "Pull not used when direction is output."
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PulseOut.c
msgid "PulseOut not supported on this chip"
msgstr ""
#: ports/stm32f4/common-hal/os/__init__.c
msgid "RNG DeInit Error"
msgstr ""
#: ports/stm32f4/common-hal/os/__init__.c
msgid "RNG Init Error"
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "RS485 inversion specified when not in RS485 mode"
msgstr ""
@ -1218,14 +1095,10 @@ msgid "RTC is not supported on this board"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
#: ports/nrf/common-hal/busio/UART.c ports/stm32f4/common-hal/busio/UART.c
#: ports/nrf/common-hal/busio/UART.c
msgid "RTS/CTS/RS485 Not yet supported on this device"
msgstr ""
#: ports/stm32f4/common-hal/os/__init__.c
msgid "Random number generation error"
msgstr ""
#: shared-bindings/pulseio/PulseIn.c
msgid "Read-only"
msgstr ""
@ -1264,14 +1137,6 @@ msgstr ""
msgid "SDA or SCL needs a pull up"
msgstr "SDA atau SCL membutuhkan pull up"
#: ports/stm32f4/common-hal/busio/SPI.c
msgid "SPI Init Error"
msgstr ""
#: ports/stm32f4/common-hal/busio/SPI.c
msgid "SPI Re-initialization error"
msgstr ""
#: shared-bindings/audiomixer/Mixer.c
msgid "Sample rate must be positive"
msgstr ""
@ -1319,14 +1184,6 @@ msgstr ""
msgid "Stream missing readinto() or write() method."
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "Supply at least one UART pin"
msgstr ""
#: ports/stm32f4/common-hal/microcontroller/Processor.c
msgid "Temperature read timed out"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"The CircuitPython heap was corrupted because the stack was too small.\n"
@ -1400,26 +1257,6 @@ msgstr ""
msgid "Tuple or struct_time argument required"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "UART Buffer allocation error"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "UART De-init error"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "UART Init Error"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "UART Re-init error"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "UART write error"
msgstr ""
#: shared-module/usb_hid/Device.c
msgid "USB Busy"
msgstr ""
@ -1536,10 +1373,6 @@ msgstr ""
msgid "Viper functions don't currently support more than 4 arguments"
msgstr ""
#: ports/stm32f4/common-hal/microcontroller/Processor.c
msgid "Voltage read timed out"
msgstr ""
#: main.c
msgid "WARNING: Your code filename has two extensions\n"
msgstr "PERINGATAN: Nama file kode anda mempunyai dua ekstensi\n"
@ -1606,6 +1439,10 @@ msgstr ""
msgid "addresses is empty"
msgstr ""
#: extmod/ulab/code/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr ""
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr ""
@ -2020,10 +1857,6 @@ msgstr ""
msgid "empty heap"
msgstr "heap kosong"
#: extmod/ulab/code/ndarray.c
msgid "empty index range"
msgstr ""
#: py/objstr.c
msgid "empty separator"
msgstr ""
@ -2114,6 +1947,10 @@ msgstr ""
msgid "first argument must be an iterable"
msgstr ""
#: extmod/ulab/code/vectorise.c
msgid "first argument must be an ndarray"
msgstr ""
#: py/objtype.c
msgid "first argument to super() must be type"
msgstr ""
@ -2163,6 +2000,10 @@ msgstr "fungsi diharapkan setidaknya %d argumen, hanya mendapatkan %d"
msgid "function got multiple values for argument '%q'"
msgstr "fungsi mendapatkan nilai ganda untuk argumen '%q'"
#: extmod/ulab/code/linalg.c
msgid "function is defined for ndarrays only"
msgstr ""
#: py/argcheck.c
#, c-format
msgid "function missing %d required positional arguments"
@ -2232,8 +2073,7 @@ msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/stm32f4/common-hal/pulseio/PulseIn.c py/obj.c
#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr "index keluar dari jangkauan"
@ -2431,6 +2271,10 @@ msgstr ""
msgid "matrix dimensions do not match"
msgstr ""
#: extmod/ulab/code/linalg.c
msgid "matrix is not positive definite"
msgstr ""
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
#, c-format
@ -2660,7 +2504,7 @@ msgstr ""
msgid "only square matrices can be inverted"
msgstr ""
#: extmod/ulab/code/ndarray.c
#: extmod/ulab/code/ndarray.c extmod/ulab/code/vectorise.c
msgid "operands could not be broadcast together"
msgstr ""
@ -2720,7 +2564,6 @@ msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/stm32f4/common-hal/pulseio/PulseIn.c
msgid "pop from an empty PulseIn"
msgstr "Muncul dari PulseIn yang kosong"

@ -8,7 +8,7 @@ msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-03-11 17:52-0400\n"
"POT-Creation-Date: 2020-03-16 20:59-0500\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
@ -472,10 +472,6 @@ msgstr ""
msgid "Cannot unambiguously get sizeof scalar"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Cannot vary frequency on a timer that is already in use"
msgstr ""
#: shared-module/bitbangio/SPI.c
msgid "Cannot write without MOSI pin."
msgstr ""
@ -533,34 +529,6 @@ msgstr ""
msgid "Could not initialize UART"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Could not initialize channel"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Could not initialize timer"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Could not re-init channel"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Could not re-init timer"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Could not restart PWM"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Could not start PWM"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "Could not start interrupt, RX busy"
msgstr ""
#: shared-module/audiomp3/MP3Decoder.c
msgid "Couldn't allocate decoder"
msgstr ""
@ -583,14 +551,6 @@ msgstr ""
msgid "Crash into the HardFault_Handler."
msgstr ""
#: ports/stm32f4/common-hal/analogio/AnalogOut.c
msgid "DAC Channel Init Error"
msgstr ""
#: ports/stm32f4/common-hal/analogio/AnalogOut.c
msgid "DAC Device Init Error"
msgstr ""
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "DAC already in use"
msgstr ""
@ -698,7 +658,6 @@ msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/stm32f4/common-hal/pulseio/PulseIn.c
#, c-format
msgid "Failed to allocate RX buffer of %d bytes"
msgstr ""
@ -732,10 +691,6 @@ msgstr ""
msgid "Frequency captured is above capability. Capture Paused."
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Frequency must match existing PWMOut using this timer"
msgstr ""
#: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c
#: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c
msgid "Function requires lock"
@ -750,22 +705,10 @@ msgstr ""
msgid "Group full"
msgstr ""
#: ports/stm32f4/common-hal/busio/I2C.c ports/stm32f4/common-hal/busio/SPI.c
msgid "Hardware busy, try alternative pins"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "Hardware in use, try alternative pins"
msgstr ""
#: extmod/vfs_posix_file.c py/objstringio.c
msgid "I/O operation on closed file"
msgstr ""
#: ports/stm32f4/common-hal/busio/I2C.c
msgid "I2C Init Error"
msgstr ""
#: extmod/machine_i2c.c
msgid "I2C operation not supported"
msgstr ""
@ -792,28 +735,16 @@ msgstr ""
msgid "Insufficient encryption"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "Internal define error"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Invalid %q pin"
msgstr ""
#: ports/stm32f4/common-hal/analogio/AnalogIn.c
msgid "Invalid ADC Unit value"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
msgid "Invalid BMP file"
msgstr ""
#: ports/stm32f4/common-hal/analogio/AnalogOut.c
msgid "Invalid DAC pin supplied"
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm32f4/common-hal/busio/I2C.c
#: ports/mimxrt10xx/common-hal/busio/I2C.c
msgid "Invalid I2C pin selection"
msgstr ""
@ -823,12 +754,11 @@ msgstr ""
msgid "Invalid PWM frequency"
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm32f4/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/SPI.c
msgid "Invalid SPI pin selection"
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/UART.c
#: ports/stm32f4/common-hal/busio/UART.c
msgid "Invalid UART pin selection"
msgstr ""
@ -840,7 +770,7 @@ msgstr ""
msgid "Invalid bits per value"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c ports/stm32f4/common-hal/busio/UART.c
#: ports/nrf/common-hal/busio/UART.c
msgid "Invalid buffer size"
msgstr ""
@ -868,10 +798,6 @@ msgstr ""
msgid "Invalid format chunk size"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Invalid frequency supplied"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Invalid memory access."
msgstr ""
@ -907,10 +833,6 @@ msgstr ""
msgid "Invalid pins"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Invalid pins for PWMOut"
msgstr ""
#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
msgid "Invalid polarity"
msgstr ""
@ -939,10 +861,6 @@ msgstr ""
msgid "Invalid wave file"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "Invalid word/bit length"
msgstr ""
#: py/compile.c
msgid "LHS of keyword arg must be an id"
msgstr ""
@ -988,18 +906,10 @@ msgstr ""
msgid "Microphone startup delay must be in range 0.0 to 1.0"
msgstr ""
#: ports/stm32f4/common-hal/busio/SPI.c
msgid "Missing MISO or MOSI Pin"
msgstr ""
#: shared-bindings/displayio/Group.c
msgid "Must be a %q subclass."
msgstr ""
#: ports/stm32f4/common-hal/busio/SPI.c
msgid "Must provide MISO or MOSI pin"
msgstr ""
#: py/parse.c
msgid "Name too long"
msgstr ""
@ -1013,7 +923,6 @@ msgid "No CCCD for this Characteristic"
msgstr ""
#: ports/atmel-samd/common-hal/analogio/AnalogOut.c
#: ports/stm32f4/common-hal/analogio/AnalogOut.c
msgid "No DAC on chip"
msgstr ""
@ -1022,23 +931,13 @@ msgstr ""
msgid "No DMA channel found"
msgstr ""
#: ports/stm32f4/common-hal/busio/SPI.c
msgid "No MISO Pin"
msgstr ""
#: ports/stm32f4/common-hal/busio/SPI.c
msgid "No MOSI Pin"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/stm32f4/common-hal/busio/UART.c
msgid "No RX pin"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/stm32f4/common-hal/busio/UART.c
msgid "No TX pin"
msgstr ""
@ -1067,10 +966,6 @@ msgstr ""
msgid "No hardware support on pin"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "No more timers available on this pin."
msgstr ""
#: shared-module/touchio/TouchIn.c
msgid "No pulldown on pin; 1Mohm recommended"
msgstr ""
@ -1138,7 +1033,6 @@ msgid ""
msgstr ""
#: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
#: ports/stm32f4/common-hal/displayio/ParallelBus.c
msgid "ParallelBus not yet supported"
msgstr ""
@ -1150,14 +1044,9 @@ msgstr ""
#: ports/cxd56/common-hal/analogio/AnalogIn.c
#: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
#: ports/nrf/common-hal/analogio/AnalogIn.c
#: ports/stm32f4/common-hal/analogio/AnalogIn.c
msgid "Pin does not have ADC capabilities"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PulseIn.c
msgid "Pin number already reserved by EXTI"
msgstr ""
#: py/builtinhelp.c
msgid "Plus any modules on the filesystem\n"
msgstr ""
@ -1178,18 +1067,6 @@ msgstr ""
msgid "Pull not used when direction is output."
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PulseOut.c
msgid "PulseOut not supported on this chip"
msgstr ""
#: ports/stm32f4/common-hal/os/__init__.c
msgid "RNG DeInit Error"
msgstr ""
#: ports/stm32f4/common-hal/os/__init__.c
msgid "RNG Init Error"
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "RS485 inversion specified when not in RS485 mode"
msgstr ""
@ -1204,14 +1081,10 @@ msgid "RTC is not supported on this board"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
#: ports/nrf/common-hal/busio/UART.c ports/stm32f4/common-hal/busio/UART.c
#: ports/nrf/common-hal/busio/UART.c
msgid "RTS/CTS/RS485 Not yet supported on this device"
msgstr ""
#: ports/stm32f4/common-hal/os/__init__.c
msgid "Random number generation error"
msgstr ""
#: shared-bindings/pulseio/PulseIn.c
msgid "Read-only"
msgstr ""
@ -1248,14 +1121,6 @@ msgstr ""
msgid "SDA or SCL needs a pull up"
msgstr ""
#: ports/stm32f4/common-hal/busio/SPI.c
msgid "SPI Init Error"
msgstr ""
#: ports/stm32f4/common-hal/busio/SPI.c
msgid "SPI Re-initialization error"
msgstr ""
#: shared-bindings/audiomixer/Mixer.c
msgid "Sample rate must be positive"
msgstr ""
@ -1303,14 +1168,6 @@ msgstr ""
msgid "Stream missing readinto() or write() method."
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "Supply at least one UART pin"
msgstr ""
#: ports/stm32f4/common-hal/microcontroller/Processor.c
msgid "Temperature read timed out"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"The CircuitPython heap was corrupted because the stack was too small.\n"
@ -1384,26 +1241,6 @@ msgstr ""
msgid "Tuple or struct_time argument required"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "UART Buffer allocation error"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "UART De-init error"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "UART Init Error"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "UART Re-init error"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "UART write error"
msgstr ""
#: shared-module/usb_hid/Device.c
msgid "USB Busy"
msgstr ""
@ -1519,10 +1356,6 @@ msgstr ""
msgid "Viper functions don't currently support more than 4 arguments"
msgstr ""
#: ports/stm32f4/common-hal/microcontroller/Processor.c
msgid "Voltage read timed out"
msgstr ""
#: main.c
msgid "WARNING: Your code filename has two extensions\n"
msgstr ""
@ -1583,6 +1416,10 @@ msgstr ""
msgid "addresses is empty"
msgstr ""
#: extmod/ulab/code/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr ""
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr ""
@ -1996,10 +1833,6 @@ msgstr ""
msgid "empty heap"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "empty index range"
msgstr ""
#: py/objstr.c
msgid "empty separator"
msgstr ""
@ -2090,6 +1923,10 @@ msgstr ""
msgid "first argument must be an iterable"
msgstr ""
#: extmod/ulab/code/vectorise.c
msgid "first argument must be an ndarray"
msgstr ""
#: py/objtype.c
msgid "first argument to super() must be type"
msgstr ""
@ -2139,6 +1976,10 @@ msgstr ""
msgid "function got multiple values for argument '%q'"
msgstr ""
#: extmod/ulab/code/linalg.c
msgid "function is defined for ndarrays only"
msgstr ""
#: py/argcheck.c
#, c-format
msgid "function missing %d required positional arguments"
@ -2208,8 +2049,7 @@ msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/stm32f4/common-hal/pulseio/PulseIn.c py/obj.c
#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr ""
@ -2407,6 +2247,10 @@ msgstr ""
msgid "matrix dimensions do not match"
msgstr ""
#: extmod/ulab/code/linalg.c
msgid "matrix is not positive definite"
msgstr ""
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
#, c-format
@ -2635,7 +2479,7 @@ msgstr ""
msgid "only square matrices can be inverted"
msgstr ""
#: extmod/ulab/code/ndarray.c
#: extmod/ulab/code/ndarray.c extmod/ulab/code/vectorise.c
msgid "operands could not be broadcast together"
msgstr ""
@ -2695,7 +2539,6 @@ msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/stm32f4/common-hal/pulseio/PulseIn.c
msgid "pop from an empty PulseIn"
msgstr ""

@ -7,7 +7,7 @@ msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-03-11 17:52-0400\n"
"POT-Creation-Date: 2020-03-16 20:59-0500\n"
"PO-Revision-Date: 2018-07-27 11:55-0700\n"
"Last-Translator: Pascal Deneaux\n"
"Language-Team: Sebastian Plamauer, Pascal Deneaux\n"
@ -476,10 +476,6 @@ msgstr "Übertragung ohne MOSI- und MISO-Pins nicht möglich."
msgid "Cannot unambiguously get sizeof scalar"
msgstr "sizeof scalar kann nicht eindeutig bestimmt werden"
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Cannot vary frequency on a timer that is already in use"
msgstr ""
#: shared-module/bitbangio/SPI.c
msgid "Cannot write without MOSI pin."
msgstr "Kann nicht ohne MOSI-Pin schreiben."
@ -537,34 +533,6 @@ msgstr "Beschädigter raw code"
msgid "Could not initialize UART"
msgstr "Konnte UART nicht initialisieren"
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Could not initialize channel"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Could not initialize timer"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Could not re-init channel"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Could not re-init timer"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Could not restart PWM"
msgstr ""
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Could not start PWM"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "Could not start interrupt, RX busy"
msgstr ""
#: shared-module/audiomp3/MP3Decoder.c
msgid "Couldn't allocate decoder"
msgstr ""
@ -587,14 +555,6 @@ msgstr "Konnte second buffer nicht zuteilen"
msgid "Crash into the HardFault_Handler."
msgstr ""
#: ports/stm32f4/common-hal/analogio/AnalogOut.c
msgid "DAC Channel Init Error"
msgstr ""
#: ports/stm32f4/common-hal/analogio/AnalogOut.c
msgid "DAC Device Init Error"
msgstr ""
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "DAC already in use"
msgstr "DAC wird schon benutzt"
@ -702,7 +662,6 @@ msgstr "Konnte keinen RX Buffer allozieren"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/stm32f4/common-hal/pulseio/PulseIn.c
#, c-format
msgid "Failed to allocate RX buffer of %d bytes"
msgstr "Konnte keine RX Buffer mit %d allozieren"
@ -738,10 +697,6 @@ msgstr ""
"Die aufgezeichnete Frequenz liegt über der Leistungsgrenze. Aufnahme "
"angehalten."
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Frequency must match existing PWMOut using this timer"
msgstr ""
#: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c
#: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c
msgid "Function requires lock"
@ -756,22 +711,10 @@ msgstr "Gruppe schon benutzt"
msgid "Group full"
msgstr "Gruppe voll"
#: ports/stm32f4/common-hal/busio/I2C.c ports/stm32f4/common-hal/busio/SPI.c
msgid "Hardware busy, try alternative pins"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "Hardware in use, try alternative pins"
msgstr ""
#: extmod/vfs_posix_file.c py/objstringio.c
msgid "I/O operation on closed file"
msgstr "Lese/Schreibe-operation an geschlossener Datei"
#: ports/stm32f4/common-hal/busio/I2C.c
msgid "I2C Init Error"
msgstr ""
#: extmod/machine_i2c.c
msgid "I2C operation not supported"
msgstr "I2C-operation nicht unterstützt"
@ -800,28 +743,16 @@ msgstr ""
msgid "Insufficient encryption"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "Internal define error"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Invalid %q pin"
msgstr "Ungültiger %q pin"
#: ports/stm32f4/common-hal/analogio/AnalogIn.c
msgid "Invalid ADC Unit value"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
msgid "Invalid BMP file"
msgstr "Ungültige BMP-Datei"
#: ports/stm32f4/common-hal/analogio/AnalogOut.c
msgid "Invalid DAC pin supplied"
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm32f4/common-hal/busio/I2C.c
#: ports/mimxrt10xx/common-hal/busio/I2C.c
msgid "Invalid I2C pin selection"
msgstr ""
@ -831,12 +762,11 @@ msgstr ""
msgid "Invalid PWM frequency"
msgstr "Ungültige PWM Frequenz"
#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm32f4/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/SPI.c
msgid "Invalid SPI pin selection"
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/UART.c
#: ports/stm32f4/common-hal/busio/UART.c
msgid "Invalid UART pin selection"
msgstr ""
@ -848,7 +778,7 @@ msgstr "Ungültiges Argument"
msgid "Invalid bits per value"
msgstr "Ungültige Bits pro Wert"
#: ports/nrf/common-hal/busio/UART.c ports/stm32f4/common-hal/busio/UART.c
#: ports/nrf/common-hal/busio/UART.c
msgid "Invalid buffer size"
msgstr "Ungültige Puffergröße"
@ -876,10 +806,6 @@ msgstr "Ungültige Datei"
msgid "Invalid format chunk size"
msgstr "Ungültige format chunk size"
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Invalid frequency supplied"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Invalid memory access."
msgstr ""
@ -915,10 +841,6 @@ msgstr "Ungültiger Pin für rechten Kanal"
msgid "Invalid pins"
msgstr "Ungültige Pins"
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "Invalid pins for PWMOut"
msgstr ""
#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
msgid "Invalid polarity"
msgstr "Ungültige Polarität"
@ -947,10 +869,6 @@ msgstr "Ungültige Anzahl von Stimmen"
msgid "Invalid wave file"
msgstr "Ungültige wave Datei"
#: ports/stm32f4/common-hal/busio/UART.c
msgid "Invalid word/bit length"
msgstr ""
#: py/compile.c
msgid "LHS of keyword arg must be an id"
msgstr "LHS des Schlüsselwortarguments muss eine id sein"
@ -997,18 +915,10 @@ msgid "Microphone startup delay must be in range 0.0 to 1.0"
msgstr ""
"Die Startverzögerung des Mikrofons muss im Bereich von 0,0 bis 1,0 liegen"
#: ports/stm32f4/common-hal/busio/SPI.c
msgid "Missing MISO or MOSI Pin"
msgstr ""
#: shared-bindings/displayio/Group.c
msgid "Must be a %q subclass."
msgstr "Muss eine %q Unterklasse sein."
#: ports/stm32f4/common-hal/busio/SPI.c
msgid "Must provide MISO or MOSI pin"
msgstr ""
#: py/parse.c
msgid "Name too long"
msgstr ""
@ -1022,7 +932,6 @@ msgid "No CCCD for this Characteristic"
msgstr "Kein CCCD für diese Charakteristik"
#: ports/atmel-samd/common-hal/analogio/AnalogOut.c
#: ports/stm32f4/common-hal/analogio/AnalogOut.c
msgid "No DAC on chip"
msgstr "Kein DAC im Chip vorhanden"
@ -1031,23 +940,13 @@ msgstr "Kein DAC im Chip vorhanden"
msgid "No DMA channel found"
msgstr "Kein DMA Kanal gefunden"
#: ports/stm32f4/common-hal/busio/SPI.c
msgid "No MISO Pin"
msgstr ""
#: ports/stm32f4/common-hal/busio/SPI.c
msgid "No MOSI Pin"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/stm32f4/common-hal/busio/UART.c
msgid "No RX pin"
msgstr "Kein RX Pin"
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/stm32f4/common-hal/busio/UART.c
msgid "No TX pin"
msgstr "Kein TX Pin"
@ -1076,10 +975,6 @@ msgstr "Keine Hardwareunterstützung am clk Pin"
msgid "No hardware support on pin"
msgstr "Keine Hardwareunterstützung an diesem Pin"
#: ports/stm32f4/common-hal/pulseio/PWMOut.c
msgid "No more timers available on this pin."
msgstr ""
#: shared-module/touchio/TouchIn.c
msgid "No pulldown on pin; 1Mohm recommended"
msgstr "Kein Pulldown Widerstand am Pin; 1Mohm wird vorgeschlagen"
@ -1153,7 +1048,6 @@ msgid ""
msgstr "Die PWM-Frequenz ist nicht schreibbar wenn variable_Frequenz = False."
#: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
#: ports/stm32f4/common-hal/displayio/ParallelBus.c
msgid "ParallelBus not yet supported"
msgstr ""
@ -1165,14 +1059,9 @@ msgstr "Zugang verweigert"
#: ports/cxd56/common-hal/analogio/AnalogIn.c
#: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
#: ports/nrf/common-hal/analogio/AnalogIn.c
#: ports/stm32f4/common-hal/analogio/AnalogIn.c
msgid "Pin does not have ADC capabilities"
msgstr "Pin hat keine ADC Funktionalität"
#: ports/stm32f4/common-hal/pulseio/PulseIn.c
msgid "Pin number already reserved by EXTI"
msgstr ""
#: py/builtinhelp.c
msgid "Plus any modules on the filesystem\n"
msgstr "und alle Module im Dateisystem \n"
@ -1195,18 +1084,6 @@ msgstr ""
msgid "Pull not used when direction is output."
msgstr "Pull wird nicht verwendet, wenn die Richtung output ist."
#: ports/stm32f4/common-hal/pulseio/PulseOut.c
msgid "PulseOut not supported on this chip"
msgstr ""
#: ports/stm32f4/common-hal/os/__init__.c
msgid "RNG DeInit Error"
msgstr ""
#: ports/stm32f4/common-hal/os/__init__.c
msgid "RNG Init Error"
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "RS485 inversion specified when not in RS485 mode"
msgstr ""
@ -1221,14 +1098,10 @@ msgid "RTC is not supported on this board"
msgstr "Eine RTC wird auf diesem Board nicht unterstützt"
#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
#: ports/nrf/common-hal/busio/UART.c ports/stm32f4/common-hal/busio/UART.c
#: ports/nrf/common-hal/busio/UART.c
msgid "RTS/CTS/RS485 Not yet supported on this device"
msgstr ""
#: ports/stm32f4/common-hal/os/__init__.c
msgid "Random number generation error"
msgstr ""
#: shared-bindings/pulseio/PulseIn.c
msgid "Read-only"
msgstr "Nur lesen möglich, da Schreibgeschützt"
@ -1265,14 +1138,6 @@ msgstr "Sicherheitsmodus aktiv! Gespeicherter Code wird nicht ausgeführt\n"
msgid "SDA or SCL needs a pull up"
msgstr "SDA oder SCL brauchen pull up"
#: ports/stm32f4/common-hal/busio/SPI.c
msgid "SPI Init Error"
msgstr ""
#: ports/stm32f4/common-hal/busio/SPI.c
msgid "SPI Re-initialization error"
msgstr ""
#: shared-bindings/audiomixer/Mixer.c
msgid "Sample rate must be positive"
msgstr "Abtastrate muss positiv sein"
@ -1320,14 +1185,6 @@ msgstr "Die Stackgröße sollte mindestens 256 sein"
msgid "Stream missing readinto() or write() method."
msgstr "Stream fehlt readinto() oder write() Methode."
#: ports/stm32f4/common-hal/busio/UART.c
msgid "Supply at least one UART pin"
msgstr ""
#: ports/stm32f4/common-hal/microcontroller/Processor.c
msgid "Temperature read timed out"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"The CircuitPython heap was corrupted because the stack was too small.\n"
@ -1403,26 +1260,6 @@ msgstr "Zurückverfolgung (jüngste Aufforderung zuletzt):\n"
msgid "Tuple or struct_time argument required"
msgstr "Tuple- oder struct_time-Argument erforderlich"
#: ports/stm32f4/common-hal/busio/UART.c
msgid "UART Buffer allocation error"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "UART De-init error"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "UART Init Error"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "UART Re-init error"
msgstr ""
#: ports/stm32f4/common-hal/busio/UART.c
msgid "UART write error"
msgstr ""
#: shared-module/usb_hid/Device.c
msgid "USB Busy"
msgstr "USB beschäftigt"
@ -1540,10 +1377,6 @@ msgstr "Länge des Wertes > max_length"
msgid "Viper functions don't currently support more than 4 arguments"
msgstr "Viper-Funktionen unterstützen derzeit nicht mehr als 4 Argumente"
#: ports/stm32f4/common-hal/microcontroller/Processor.c
msgid "Voltage read timed out"
msgstr ""
#: main.c
msgid "WARNING: Your code filename has two extensions\n"
msgstr ""
@ -1611,6 +1444,10 @@ msgstr "Adresse außerhalb der Grenzen"
msgid "addresses is empty"
msgstr "adresses ist leer"
#: extmod/ulab/code/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr ""
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr "arg ist eine leere Sequenz"
@ -2025,10 +1862,6 @@ msgstr "leer"
msgid "empty heap"
msgstr "leerer heap"
#: extmod/ulab/code/ndarray.c
msgid "empty index range"
msgstr ""
#: py/objstr.c
msgid "empty separator"
msgstr "leeres Trennzeichen"
@ -2119,6 +1952,10 @@ msgstr "Das Dateisystem muss eine Mount-Methode bereitstellen"
msgid "first argument must be an iterable"
msgstr ""
#: extmod/ulab/code/vectorise.c
msgid "first argument must be an ndarray"
msgstr ""
#: py/objtype.c
msgid "first argument to super() must be type"
msgstr "Das erste Argument für super() muss type sein"
@ -2168,6 +2005,10 @@ msgstr "Funktion erwartet maximal %d Argumente, aber hat %d erhalten"
msgid "function got multiple values for argument '%q'"
msgstr "Funktion hat mehrere Werte für Argument '%q'"
#: extmod/ulab/code/linalg.c
msgid "function is defined for ndarrays only"
msgstr ""
#: py/argcheck.c
#, c-format
msgid "function missing %d required positional arguments"
@ -2238,8 +2079,7 @@ msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/stm32f4/common-hal/pulseio/PulseIn.c py/obj.c
#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr "index außerhalb der Reichweite"
@ -2443,6 +2283,10 @@ msgstr ""
msgid "matrix dimensions do not match"
msgstr ""
#: extmod/ulab/code/linalg.c
msgid "matrix is not positive definite"
msgstr ""
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
#, c-format
@ -2671,7 +2515,7 @@ msgstr ""
msgid "only square matrices can be inverted"
msgstr ""
#: extmod/ulab/code/ndarray.c
#: extmod/ulab/code/ndarray.c extmod/ulab/code/vectorise.c
msgid "operands could not be broadcast together"
msgstr ""
@ -2733,7 +2577,6 @@ msgstr "pixel_shader muss displayio.Palette oder displayio.ColorConverter sein"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c