Merge remote-tracking branch 'adafruit/master' into bleio_tweaks

crypto-aes
Scott Shawcroft 3 years ago
commit 47e50e5659
No known key found for this signature in database
GPG Key ID: 9349BC7E64B1921E

@ -52,9 +52,6 @@ jobs:
done
working-directory: tests
if: failure()
- name: Test threads
run: MICROPY_CPYTHON3=python3.5 MICROPY_MICROPYTHON=../ports/unix/micropython_coverage ./run-tests -j1 -d thread
working-directory: tests
- name: Native Tests
run: MICROPY_CPYTHON3=python3.5 MICROPY_MICROPYTHON=../ports/unix/micropython_coverage ./run-tests -j1 --emit native
working-directory: tests
@ -78,6 +75,7 @@ jobs:
board:
- "arduino_mkr1300"
- "arduino_mkrzero"
- "arduino_nano_33_ble"
- "arduino_zero"
- "bast_pro_mini_m0"
- "capablerobot_usbhub"
@ -95,7 +93,6 @@ jobs:
- "electronut_labs_blip"
- "electronut_labs_papyr"
- "escornabot_makech"
- "feather_f405"
- "feather_m0_adalogger"
- "feather_m0_basic"
- "feather_m0_express"
@ -106,12 +103,14 @@ jobs:
- "feather_m4_express"
- "feather_nrf52840_express"
- "feather_radiofruit_zigbee"
- "feather_stm32f405_express"
- "gemma_m0"
- "grandcentral_m4_express"
- "hallowing_m0_express"
- "hallowing_m4_express"
- "itsybitsy_m0_express"
- "itsybitsy_m4_express"
- "itsybitsy_nrf52840_express"
- "kicksat-sprite"
- "makerdiary_nrf52840_mdk"
- "makerdiary_nrf52840_mdk_usb_dongle"
@ -145,6 +144,8 @@ jobs:
- "snekboard"
- "sparkfun_lumidrive"
- "sparkfun_nrf52840_mini"
- "sparkfun_qwiic_micro_no_flash"
- "sparkfun_qwiic_micro_with_flash"
- "sparkfun_redboard_turbo"
- "sparkfun_samd21_dev"
- "sparkfun_samd21_mini"

@ -1 +0,0 @@
Subproject commit d2bcfda543d3b99361e44112aca929225bdcc07f

@ -74,24 +74,21 @@ uint8_t display_init_sequence[] = {
0x11, 0x1d, 0x23, 0x35, 0x41, 0x4b, 0x4b, 0x42, 0x3A,
0x27, 0x1B, 0x08, 0x09, 0x03, 0x00, 0x01,
0x3a, 1, 0x55,
0x36, 1, 0x00,
0x36, 1, 0x60,
0x11, DELAY, 150/5, // Exit Sleep, then delay 150 ms
0x29, DELAY, 50/5
};
void board_init(void) {
busio_spi_obj_t* spi = &displays[0].fourwire_bus.inline_bus;
common_hal_busio_spi_construct(spi, &pin_PA13, &pin_PA12, &pin_PA14);
common_hal_busio_spi_never_reset(spi);
displayio_fourwire_obj_t* bus = &displays[0].fourwire_bus;
bus->base.type = &displayio_fourwire_type;
common_hal_displayio_fourwire_construct(bus,
spi,
&pin_PB05, // TFT_DC Command or data
&pin_PB06, // TFT_CS Chip select
&pin_PA00, // TFT_RST Reset
24000000);
displayio_parallelbus_obj_t* bus = &displays[0].parallel_bus;
bus->base.type = &displayio_parallelbus_type;
common_hal_displayio_parallelbus_construct(bus,
&pin_PA16, // Data0
&pin_PB05, // Command or data
&pin_PB06, // Chip select
&pin_PB09, // Write
&pin_PB04, // Read
&pin_PA00); // Reset
displayio_display_obj_t* display = &displays[0].display;
display->base.type = &displayio_display_type;
@ -101,7 +98,7 @@ void board_init(void) {
320, // Height
0, // column start
0, // row start
270, // rotation
0, // rotation
16, // Color depth
false, // grayscale
false, // pixels_in_byte_share_row (unused for depths > 8)

@ -3,7 +3,6 @@
#define CIRCUITPY_MCU_FAMILY samd51
#define MICROPY_HW_LED_STATUS (&pin_PA27)
#define MICROPY_HW_NEOPIXEL (&pin_PB22)

@ -80,15 +80,6 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
// TFT control pins
{MP_OBJ_NEW_QSTR(MP_QSTR_TFT_LITE), MP_ROM_PTR(&pin_PB31)},
{MP_OBJ_NEW_QSTR(MP_QSTR_TFT_MOSI), MP_ROM_PTR(&pin_PA12)},
{MP_OBJ_NEW_QSTR(MP_QSTR_TFT_SCK), MP_ROM_PTR(&pin_PA13)},
{MP_OBJ_NEW_QSTR(MP_QSTR_TFT_MISO), MP_ROM_PTR(&pin_PA14)},
{MP_OBJ_NEW_QSTR(MP_QSTR_TFT_RST), MP_ROM_PTR(&pin_PA00)},
{MP_ROM_QSTR(MP_QSTR_TFT_CS), MP_ROM_PTR(&pin_PB06)},
{MP_ROM_QSTR(MP_QSTR_TFT_DC), MP_ROM_PTR(&pin_PB05)},
{ MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display) },
};
MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);

@ -0,0 +1,38 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "boards/board.h"
void board_init(void)
{
}
bool board_requests_safe_mode(void) {
return false;
}
void reset_board(void) {
}

@ -0,0 +1,38 @@
#define MICROPY_HW_BOARD_NAME "SparkFun Qwiic Micro"
#define MICROPY_HW_MCU_NAME "samd21e18"
#define MICROPY_PORT_A ( 0 )
#define MICROPY_PORT_B ( 0 )
#define MICROPY_PORT_C ( 0 )
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
#define CALIBRATE_CRYSTALLESS 1
#define BOARD_HAS_CRYSTAL 0
//I2C and Qwiic Connector
#define DEFAULT_I2C_BUS_SCL (&pin_PA09)
#define DEFAULT_I2C_BUS_SDA (&pin_PA08)
//SPI
#define DEFAULT_SPI_BUS_SCK (&pin_PA07)
#define DEFAULT_SPI_BUS_MOSI (&pin_PA06)
#define DEFAULT_SPI_BUS_MISO (&pin_PA05)
//UART
#define DEFAULT_UART_BUS_RX (&pin_PA23)
#define DEFAULT_UART_BUS_TX (&pin_PA22)
// USB is always used internally so skip the pin objects for it.
#define IGNORE_PIN_PA24 1
#define IGNORE_PIN_PA25 1
// Unused
#define IGNORE_PIN_PA03 1
#define IGNORE_PIN_PA11 1
#define IGNORE_PIN_PA14 1
#define IGNORE_PIN_PA15 1
#define IGNORE_PIN_PA27 1
#define IGNORE_PIN_PA28 1

@ -0,0 +1,14 @@
LD_FILE = boards/samd21x18-bootloader-external-flash-crystalless.ld
USB_VID = 0x1B4F
USB_PID = 0x8D24
USB_PRODUCT = "SparkFun Qwiic Micro"
USB_MANUFACTURER = "SparkFun Electronics"
CHIP_VARIANT = SAMD21E18A
CHIP_FAMILY = samd21
INTERNAL_FLASH_FILESYSTEM = 1
LONGINT_IMPL = NONE
CIRCUITPY_SMALL_BUILD = 1
SUPEROPT_GC = 0

@ -0,0 +1,42 @@
#include "shared-bindings/board/__init__.h"
STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA02) },
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA06) },
{ MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA05) },
{ MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA07) },
{ MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA10) },
{ MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA04) },
{ MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA08) },
{ MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA02) },
{ MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA06) },
{ MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA05) },
{ MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA07) },
{ MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA00) },
{ MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA01) },
{ MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PA04) },
{ MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PA09) },
{ MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA10) },
{ MP_ROM_QSTR(MP_QSTR_D16), MP_ROM_PTR(&pin_PA22) },
{ MP_ROM_QSTR(MP_QSTR_D17), MP_ROM_PTR(&pin_PA23) },
// External SPI
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA07) },
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA06) },
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA05) },
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
// UART
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA22) },
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA23) },
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
// I2C and Qwiic Connector
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA08) },
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA09) },
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }
};
MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);

@ -0,0 +1,38 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "boards/board.h"
void board_init(void)
{
}
bool board_requests_safe_mode(void) {
return false;
}
void reset_board(void) {
}

@ -0,0 +1,46 @@
#define MICROPY_HW_BOARD_NAME "SparkFun Qwiic Micro"
#define MICROPY_HW_MCU_NAME "samd21e18"
// Clock rates are off: Salae reads 12MHz which is the limit even though we set it to the safer 8MHz.
#define SPI_FLASH_BAUDRATE (8000000)
#define SPI_FLASH_MOSI_PIN &pin_PA16
#define SPI_FLASH_MISO_PIN &pin_PA18
#define SPI_FLASH_SCK_PIN &pin_PA17
#define SPI_FLASH_CS_PIN &pin_PA19
#define MICROPY_PORT_A ( 0 )
#define MICROPY_PORT_B ( 0 )
#define MICROPY_PORT_C ( 0 )
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
#define CALIBRATE_CRYSTALLESS 1
#define BOARD_HAS_CRYSTAL 0
//I2C and Qwiic Connector
#define DEFAULT_I2C_BUS_SCL (&pin_PA09)
#define DEFAULT_I2C_BUS_SDA (&pin_PA08)
//SPI
#define DEFAULT_SPI_BUS_SCK (&pin_PA07)
#define DEFAULT_SPI_BUS_MOSI (&pin_PA06)
#define DEFAULT_SPI_BUS_MISO (&pin_PA05)
//UART
#define DEFAULT_UART_BUS_RX (&pin_PA23)
#define DEFAULT_UART_BUS_TX (&pin_PA22)
// USB is always used internally so skip the pin objects for it.
#define IGNORE_PIN_PA24 1
#define IGNORE_PIN_PA25 1
// Unused
#define IGNORE_PIN_PA03 1
#define IGNORE_PIN_PA11 1
#define IGNORE_PIN_PA14 1
#define IGNORE_PIN_PA15 1
#define IGNORE_PIN_PA27 1
#define IGNORE_PIN_PA28 1

@ -0,0 +1,16 @@
LD_FILE = boards/samd21x18-bootloader-external-flash-crystalless.ld
USB_VID = 0x1B4F
USB_PID = 0x8D24
USB_PRODUCT = "SparkFun Qwiic Micro"
USB_MANUFACTURER = "SparkFun Electronics"
CHIP_VARIANT = SAMD21E18A
CHIP_FAMILY = samd21
SPI_FLASH_FILESYSTEM = 1
EXTERNAL_FLASH_DEVICE_COUNT = 1
EXTERNAL_FLASH_DEVICES = "W25Q32FV"
LONGINT_IMPL = MPZ
CIRCUITPY_SMALL_BUILD = 1
SUPEROPT_GC = 0

@ -0,0 +1,42 @@
#include "shared-bindings/board/__init__.h"
STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA02) },
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA06) },
{ MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA05) },
{ MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA07) },
{ MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA10) },
{ MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA04) },
{ MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA08) },
{ MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA02) },
{ MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA06) },
{ MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA05) },
{ MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA07) },
{ MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA00) },
{ MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA01) },
{ MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PA04) },
{ MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PA09) },
{ MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA10) },
{ MP_ROM_QSTR(MP_QSTR_D16), MP_ROM_PTR(&pin_PA22) },
{ MP_ROM_QSTR(MP_QSTR_D17), MP_ROM_PTR(&pin_PA23) },
// External SPI
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA07) },
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA06) },
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA05) },
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
// UART
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA22) },
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA23) },
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
// I2C and Qwiic Connector
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA08) },
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA09) },
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }
};
MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);

@ -135,6 +135,7 @@ pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t* self,
bool variable_frequency) {
self->pin = pin;
self->variable_frequency = variable_frequency;
self->duty_cycle = duty;
if (pin->timer[0].index >= TC_INST_NUM &&
pin->timer[1].index >= TCC_INST_NUM
@ -322,6 +323,13 @@ void common_hal_pulseio_pwmout_deinit(pulseio_pwmout_obj_t* self) {
}
extern void common_hal_pulseio_pwmout_set_duty_cycle(pulseio_pwmout_obj_t* self, uint16_t duty) {
// Store the unadjusted duty cycle. It turns out the the process of adjusting and calculating
// the duty cycle here and reading it back is lossy - the value will decay over time.
// Track it here so that if frequency is changed we can use this value to recalculate the
// proper duty cycle.
// See https://github.com/adafruit/circuitpython/issues/2086 for more details
self->duty_cycle = duty;
const pin_timer_t* t = self->timer;
if (t->is_tc) {
uint16_t adjusted_duty = tc_periods[t->index] * duty / 0xffff;
@ -415,7 +423,6 @@ void common_hal_pulseio_pwmout_set_frequency(pulseio_pwmout_obj_t* self,
break;
}
}
uint16_t old_duty = common_hal_pulseio_pwmout_get_duty_cycle(self);
if (t->is_tc) {
Tc* tc = tc_insts[t->index];
uint8_t old_divisor = tc->COUNT16.CTRLA.bit.PRESCALER;
@ -450,7 +457,7 @@ void common_hal_pulseio_pwmout_set_frequency(pulseio_pwmout_obj_t* self,
#endif
}
common_hal_pulseio_pwmout_set_duty_cycle(self, old_duty);
common_hal_pulseio_pwmout_set_duty_cycle(self, self->duty_cycle);
}
uint32_t common_hal_pulseio_pwmout_get_frequency(pulseio_pwmout_obj_t* self) {

@ -36,6 +36,7 @@ typedef struct {
const mcu_pin_obj_t *pin;
const pin_timer_t* timer;
bool variable_frequency;
uint16_t duty_cycle;
} pulseio_pwmout_obj_t;
void pwmout_reset(void);

@ -26,7 +26,6 @@
#define MICROPY_HW_BOARD_NAME "SPRESENSE"
#define MICROPY_HW_MCU_NAME "CXD5602"
#define MICROPY_PY_SYS_PLATFORM "SPRESENSE"
#define DEFAULT_I2C_BUS_SCL (&pin_I2C0_BCK)
#define DEFAULT_I2C_BUS_SDA (&pin_I2C0_BDT)

@ -68,9 +68,11 @@ void common_hal_analogio_analogin_construct(analogio_analogin_obj_t *self, const
mp_raise_ValueError(translate("Pin does not have ADC capabilities"));
}
analogin_dev[self->number].fd = open(analogin_dev[pin->number].devpath, O_RDONLY);
if (analogin_dev[self->number].fd < 0) {
mp_raise_ValueError(translate("Pin does not have ADC capabilities"));
analogin_dev[self->number].fd = open(analogin_dev[self->number].devpath, O_RDONLY);
if (analogin_dev[self->number].fd < 0) {
mp_raise_ValueError(translate("Pin does not have ADC capabilities"));
}
}
// SCU FIFO overwrite
@ -99,7 +101,7 @@ void common_hal_analogio_analogin_deinit(analogio_analogin_obj_t *self) {
}
bool common_hal_analogio_analogin_deinited(analogio_analogin_obj_t *self) {
return self->pin == mp_const_none;
return analogin_dev[self->number].fd < 0;
}
uint16_t common_hal_analogio_analogin_get_value(analogio_analogin_obj_t *self) {

@ -34,7 +34,7 @@
typedef struct {
mp_obj_base_t base;
const mcu_pin_obj_t *pin;
uint8_t number;
int8_t number;
} analogio_analogin_obj_t;
void analogin_reset(void);

@ -32,7 +32,6 @@
#include <sys/time.h>
#include <sys/select.h>
#include <sys/ioctl.h>
#include <arch/chip/pin.h>
#include <nuttx/serial/tioctl.h>
#include <nuttx/fs/ioctl.h>
@ -42,22 +41,23 @@
#include "shared-bindings/busio/UART.h"
typedef struct {
const char* devpath;
const mcu_pin_obj_t *tx;
const mcu_pin_obj_t *rx;
int fd;
} busio_uart_dev_t;
STATIC busio_uart_dev_t busio_uart_dev[] = {
{"/dev/ttyS2", &pin_UART2_TXD, &pin_UART2_RXD, -1},
};
void common_hal_busio_uart_construct(busio_uart_obj_t *self,
const mcu_pin_obj_t *tx, const mcu_pin_obj_t *rx, uint32_t baudrate,
uint8_t bits, uart_parity_t parity, uint8_t stop, mp_float_t timeout,
uint16_t receiver_buffer_size) {
struct termios tio;
self->uart_fd = open("/dev/ttyS2", O_RDWR);
if (self->uart_fd < 0) {
mp_raise_ValueError(translate("Could not initialize UART"));
}
ioctl(self->uart_fd, TCGETS, (long unsigned int)&tio);
tio.c_speed = baudrate;
ioctl(self->uart_fd, TCSETS, (long unsigned int)&tio);
ioctl(self->uart_fd, TCFLSH, (long unsigned int)NULL);
if (bits != 8) {
mp_raise_ValueError(translate("Could not initialize UART"));
}
@ -70,10 +70,32 @@ void common_hal_busio_uart_construct(busio_uart_obj_t *self,
mp_raise_ValueError(translate("Could not initialize UART"));
}
if (tx->number != PIN_UART2_TXD || rx->number != PIN_UART2_RXD) {
self->number = -1;
for (int i = 0; i < MP_ARRAY_SIZE(busio_uart_dev); i++) {
if (tx->number == busio_uart_dev[i].tx->number &&
rx->number == busio_uart_dev[i].rx->number) {
self->number = i;
break;
}
}
if (self->number < 0) {
mp_raise_ValueError(translate("Invalid pins"));
}
if (busio_uart_dev[self->number].fd < 0) {
busio_uart_dev[self->number].fd = open(busio_uart_dev[self->number].devpath, O_RDWR);
if (busio_uart_dev[self->number].fd < 0) {
mp_raise_ValueError(translate("Could not initialize UART"));
}
}
ioctl(busio_uart_dev[self->number].fd, TCGETS, (long unsigned int)&tio);
tio.c_speed = baudrate;
ioctl(busio_uart_dev[self->number].fd, TCSETS, (long unsigned int)&tio);
ioctl(busio_uart_dev[self->number].fd, TCFLSH, (long unsigned int)NULL);
claim_pin(tx);
claim_pin(rx);
@ -88,15 +110,15 @@ void common_hal_busio_uart_deinit(busio_uart_obj_t *self) {
return;
}
close(self->uart_fd);
self->uart_fd = -1;
close(busio_uart_dev[self->number].fd);
busio_uart_dev[self->number].fd = -1;
reset_pin_number(self->tx_pin->number);
reset_pin_number(self->rx_pin->number);
}
bool common_hal_busio_uart_deinited(busio_uart_obj_t *self) {
return self->uart_fd < 0;
return busio_uart_dev[self->number].fd < 0;
}
size_t common_hal_busio_uart_read(busio_uart_obj_t *self, uint8_t *data, size_t len, int *errcode) {
@ -110,15 +132,15 @@ size_t common_hal_busio_uart_read(busio_uart_obj_t *self, uint8_t *data, size_t
}
FD_ZERO(&rfds);
FD_SET(self->uart_fd, &rfds);
FD_SET(busio_uart_dev[self->number].fd, &rfds);
tv.tv_sec = 0;
tv.tv_usec = self->timeout * 1000;
retval = select(self->uart_fd + 1, &rfds, NULL, NULL, &tv);
retval = select(busio_uart_dev[self->number].fd + 1, &rfds, NULL, NULL, &tv);
if (retval) {
bytes_read = read(self->uart_fd, data, len);
bytes_read = read(busio_uart_dev[self->number].fd, data, len);
} else {
*errcode = EAGAIN;
return MP_STREAM_ERROR;
@ -128,8 +150,7 @@ size_t common_hal_busio_uart_read(busio_uart_obj_t *self, uint8_t *data, size_t
}
size_t common_hal_busio_uart_write(busio_uart_obj_t *self, const uint8_t *data, size_t len, int *errcode) {
int bytes_written = write(self->uart_fd, data, len);
int bytes_written = write(busio_uart_dev[self->number].fd, data, len);
if (bytes_written < 0) {
*errcode = MP_EAGAIN;
return MP_STREAM_ERROR;
@ -145,16 +166,16 @@ uint32_t common_hal_busio_uart_get_baudrate(busio_uart_obj_t *self) {
void common_hal_busio_uart_set_baudrate(busio_uart_obj_t *self, uint32_t baudrate) {
struct termios tio;
ioctl(self->uart_fd, TCGETS, (long unsigned int)&tio);
ioctl(busio_uart_dev[self->number].fd, TCGETS, (long unsigned int)&tio);
tio.c_speed = baudrate;
ioctl(self->uart_fd, TCSETS, (long unsigned int)&tio);
ioctl(self->uart_fd, TCFLSH, (long unsigned int)NULL);
ioctl(busio_uart_dev[self->number].fd, TCSETS, (long unsigned int)&tio);
ioctl(busio_uart_dev[self->number].fd, TCFLSH, (long unsigned int)NULL);
}
uint32_t common_hal_busio_uart_rx_characters_available(busio_uart_obj_t *self) {
int count = 0;
ioctl(self->uart_fd, FIONREAD, (long unsigned int)&count);
ioctl(busio_uart_dev[self->number].fd, FIONREAD, (long unsigned int)&count);
return count;
}
@ -163,6 +184,15 @@ void common_hal_busio_uart_clear_rx_buffer(busio_uart_obj_t *self) {
}
bool common_hal_busio_uart_ready_to_tx(busio_uart_obj_t *self) {
ioctl(self->uart_fd, TCFLSH, (long unsigned int)NULL);
ioctl(busio_uart_dev[self->number].fd, TCFLSH, (long unsigned int)NULL);
return true;
}
void busio_uart_reset(void) {
for (int i = 0; i < MP_ARRAY_SIZE(busio_uart_dev); i++) {
if (busio_uart_dev[i].fd >= 0) {
close(busio_uart_dev[i].fd);
busio_uart_dev[i].fd = -1;
}
}
}

@ -33,11 +33,13 @@
typedef struct {
mp_obj_base_t base;
int uart_fd;
int8_t number;
const mcu_pin_obj_t *tx_pin;
const mcu_pin_obj_t *rx_pin;
uint32_t baudrate;
uint32_t timeout;
} busio_uart_obj_t;
void busio_uart_reset(void);
#endif // MICROPY_INCLUDED_CXD56_COMMON_HAL_BUSIO_UART_H

@ -62,9 +62,11 @@ pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t *self,
return PWMOUT_INVALID_PIN;
}
pwmout_dev[self->number].fd = open(pwmout_dev[self->number].devpath, O_RDONLY);
if (pwmout_dev[self->number].fd < 0) {
return PWMOUT_INVALID_PIN;
pwmout_dev[self->number].fd = open(pwmout_dev[self->number].devpath, O_RDONLY);
if (pwmout_dev[self->number].fd < 0) {
return PWMOUT_INVALID_PIN;
}
}
self->info.frequency = frequency;
@ -97,7 +99,7 @@ void common_hal_pulseio_pwmout_deinit(pulseio_pwmout_obj_t *self) {
}
bool common_hal_pulseio_pwmout_deinited(pulseio_pwmout_obj_t *self) {
return self->pin == mp_const_none;
return pwmout_dev[self->number].fd < 0;
}
void common_hal_pulseio_pwmout_set_duty_cycle(pulseio_pwmout_obj_t *self, uint16_t duty) {

@ -38,7 +38,7 @@ typedef struct {
const mcu_pin_obj_t *pin;
struct pwm_info_s info;
bool variable_frequency;
uint8_t number;
int8_t number;
} pulseio_pwmout_obj_t;
void pwmout_reset(void);

@ -27,6 +27,8 @@
#ifndef __INCLUDED_MPCONFIGPORT_H
#define __INCLUDED_MPCONFIGPORT_H
#define MICROPY_PY_SYS_PLATFORM "CXD56"
// 64kiB stack
#define CIRCUITPY_DEFAULT_STACK_SIZE 0x10000

@ -37,6 +37,7 @@
#include "common-hal/analogio/AnalogIn.h"
#include "common-hal/pulseio/PulseOut.h"
#include "common-hal/pulseio/PWMOut.h"
#include "common-hal/busio/UART.h"
safe_mode_t port_init(void) {
boardctl(BOARDIOC_INIT, 0);
@ -62,6 +63,9 @@ void reset_port(void) {
pulseout_reset();
pwmout_reset();
#endif
#if CIRCUITPY_BUSIO
busio_uart_reset();
#endif
reset_all_pins();
}

@ -0,0 +1,27 @@
# Arduino Nano 33 BLE and Nano 33 BLE Sense
The [Arduino Nano 33 BLE](https://store.arduino.cc/usa/nano-33-ble-with-headers) and
[Arduino Nano 33 BLE Sense](https://store.arduino.cc/usa/nano-33-ble-sense) and
are built around the NINA B306 module, based on Nordic nRF 52840 and containing
a powerful Cortex M4F. Both include an onboard 9 axis Inertial Measurement Unit (IMU), the LSM9DS1.
The Nano 33 BLE Sense adds an LPS22HB barometric pressure and temperature sensor,
an ADPS-9960 digital proximity, ambient light, RGB, and gensture sensor,
and an MP34DT05 digital microphone.
Note: the Arduino Nano 33 BLE and BLE Sense do not include a QSPI external
flash. Any Python code will need to be stored on the internal flash
filesystem.
I2C pins `board.SCL1` and `board.SDA1` are not exposed and are used for onboard peripherals.
Pin `board.R_PULLUP` must be set to high to enable the `SCL1` and `SDA1` pullups for proper operation.
Pin `board.VDD_ENV` applies power to the LSM9DS1, and must be high for it to be operational.
Pins `board.MIC_PWR`, `board.PDMDIN`, and `board.PDMCLK` are for the Nano 33 BLE Sense onboard microphone.
Pin `board.INT_ADPS` is the interrupt pin from the ADPS-9960.
Pins `board.RGB_LED_R`, `board.RGB_LED_G`, and `board.RGB_LED_B`
are the red, green and blue LEDS in the onboard RGB LED.
Pins `board.LED_G` and `board.LED_Y` are onboard green and red LEDs. `board.LED_Y` is also `board.SCK`.

@ -0,0 +1,63 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "boards/board.h"
#include "nrf.h"
#include "nrf_rtc.h"
void board_init(void) {
// Initializations below from Arduino variant.cpp.
// // turn power LED on
// pinMode(LED_PWR, OUTPUT);
// digitalWrite(LED_PWR, HIGH);
// Errata Nano33BLE - I2C pullup is on SWO line, need to disable TRACE
// was being enabled by nrfx_clock_anomaly_132
CoreDebug->DEMCR = 0;
NRF_CLOCK->TRACECONFIG = 0;
// FIXME: bootloader enables interrupt on COMPARE[0], which we don't handle
// Disable it here to avoid getting stuck when OVERFLOW irq is triggered
nrf_rtc_event_disable(NRF_RTC1, NRF_RTC_INT_COMPARE0_MASK);
nrf_rtc_int_disable(NRF_RTC1, NRF_RTC_INT_COMPARE0_MASK);
// // FIXME: always enable I2C pullup and power @startup
// // Change for maximum powersave
// pinMode(PIN_ENABLE_SENSORS_3V3, OUTPUT);
// pinMode(PIN_ENABLE_I2C_PULLUP, OUTPUT);
// digitalWrite(PIN_ENABLE_SENSORS_3V3, HIGH);
// digitalWrite(PIN_ENABLE_I2C_PULLUP, HIGH);
}
bool board_requests_safe_mode(void) {
return false;
}
void reset_board(void) {
}

@ -0,0 +1,16 @@
#include "nrfx/hal/nrf_gpio.h"
#define MICROPY_HW_BOARD_NAME "Arduino Nano 33 BLE"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define CIRCUITPY_AUTORELOAD_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_P0_02)
#define DEFAULT_I2C_BUS_SDA (&pin_P0_31)
#define DEFAULT_SPI_BUS_SCK (&pin_P0_13)
#define DEFAULT_SPI_BUS_MOSI (&pin_P0_01)
#define DEFAULT_SPI_BUS_MISO (&pin_P1_08)
#define DEFAULT_UART_BUS_RX (&pin_P1_10)
#define DEFAULT_UART_BUS_TX (&pin_P1_03)

@ -0,0 +1,24 @@
USB_VID = 0x2341
USB_PID = 0x805A
USB_PRODUCT = "Arduino_Nano_33_BLE"
USB_MANUFACTURER = "Arduino"
MCU_SERIES = m4
MCU_VARIANT = nrf52
MCU_SUB_VARIANT = nrf52840
MCU_CHIP = nrf52840
SD ?= s140
SOFTDEV_VERSION ?= 6.1.0
BOOT_SETTING_ADDR = 0xFF000
ifeq ($(SD),)
LD_FILE = boards/nrf52840_1M_256k.ld
else
LD_FILE = boards/adafruit_$(MCU_SUB_VARIANT)_$(SD_LOWER)_v$(firstword $(subst ., ,$(SOFTDEV_VERSION))).ld
CIRCUITPY_BLEIO = 1
endif
NRF_DEFINES += -DNRF52840_XXAA -DNRF52840
INTERNAL_FLASH_FILESYSTEM = 1

@ -0,0 +1,63 @@
#include "shared-bindings/board/__init__.h"
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_P1_11) },
{ MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_P1_12) },
{ MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_P1_15) },
{ MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_P1_13) },
{ MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_P1_14) },
{ MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_P0_23) },
{ MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_P0_21) },
{ MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_P0_27) },
{ MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_P1_02) },
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_P0_04) },
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_P0_05) },
{ MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_P0_30) },
{ MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_P0_29) },
{ MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_P0_31) },
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_P0_31) },
{ MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_P0_02) },
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_P0_02) },
{ MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_P0_28) },
{ MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_P0_03) },
{ MP_ROM_QSTR(MP_QSTR_SDA1), MP_ROM_PTR(&pin_P0_14) },
{ MP_ROM_QSTR(MP_QSTR_SCL1), MP_ROM_PTR(&pin_P0_15) },
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_P1_01) },
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_P1_08) },
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_P0_13) },
{ MP_ROM_QSTR(MP_QSTR_LED_Y), MP_ROM_PTR(&pin_P0_13) },
{ MP_ROM_QSTR(MP_QSTR_LED_G), MP_ROM_PTR(&pin_P1_09) },
{ MP_ROM_QSTR(MP_QSTR_RGB_LED_R), MP_ROM_PTR(&pin_P0_24) },
{ MP_ROM_QSTR(MP_QSTR_RGB_LED_G), MP_ROM_PTR(&pin_P0_16) },
{ MP_ROM_QSTR(MP_QSTR_RGB_LED_B), MP_ROM_PTR(&pin_P0_06) },
// Power line to LSM9DS1.
{ MP_ROM_QSTR(MP_QSTR_VDD_ENV), MP_ROM_PTR(&pin_P0_22) },
// Pullup voltage for SDA1 and SCL1
{ MP_ROM_QSTR(MP_QSTR_R_PULLUP), MP_ROM_PTR(&pin_P1_00) },
{ MP_ROM_QSTR(MP_QSTR_MIC_PWR), MP_ROM_PTR(&pin_P0_17) },
{ MP_ROM_QSTR(MP_QSTR_PDMCLK), MP_ROM_PTR(&pin_P0_26) },
{ MP_ROM_QSTR(MP_QSTR_PDMDIN), MP_ROM_PTR(&pin_P0_25) },
{ MP_ROM_QSTR(MP_QSTR_INT_APDS), MP_ROM_PTR(&pin_P0_19) },
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_P1_03) },
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_P1_10) },
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
};
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

@ -29,7 +29,6 @@
#define MICROPY_HW_BOARD_NAME "Adafruit Circuit Playground Bluefruit"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "CircuitPlaygroundBluefruit"
#define FLASH_SIZE (0x100000)
#define FLASH_PAGE_SIZE (4096)

@ -32,7 +32,6 @@
#define MICROPY_HW_BOARD_NAME "Electronut Labs Blip"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "ElectronutLabsPapyr"
#define CIRCUITPY_AUTORELOAD_DELAY_MS 500

@ -31,7 +31,6 @@
#define MICROPY_HW_BOARD_NAME "Electronut Labs Papyr"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "ElectronutLabsPapyr"
#define CIRCUITPY_AUTORELOAD_DELAY_MS 500

@ -29,7 +29,6 @@
#define MICROPY_HW_BOARD_NAME "Adafruit Feather nRF52840 Express"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "Feather52840Express"
#define FLASH_SIZE (0x100000)
#define FLASH_PAGE_SIZE (4096)

@ -0,0 +1,46 @@
#include "nrfx/hal/nrf_gpio.h"
#define MICROPY_HW_BOARD_NAME "Adafruit ItsyBitsy nRF52840 Express"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define FLASH_SIZE (0x100000)
#define FLASH_PAGE_SIZE (4096)
#define MICROPY_HW_LED_STATUS (&pin_P0_06)
#define MICROPY_HW_APA102_MOSI (&pin_P0_08)
#define MICROPY_HW_APA102_SCK (&pin_P1_09)
#if QSPI_FLASH_FILESYSTEM
#define MICROPY_QSPI_DATA0 NRF_GPIO_PIN_MAP(0, 21)
#define MICROPY_QSPI_DATA1 NRF_GPIO_PIN_MAP(0, 22)
#define MICROPY_QSPI_DATA2 NRF_GPIO_PIN_MAP(1, 00)
#define MICROPY_QSPI_DATA3 NRF_GPIO_PIN_MAP(0, 17)
#define MICROPY_QSPI_SCK NRF_GPIO_PIN_MAP(0, 19)
#define MICROPY_QSPI_CS NRF_GPIO_PIN_MAP(0, 23)
#endif
#if SPI_FLASH_FILESYSTEM
#define SPI_FLASH_MOSI_PIN &pin_P0_21
#define SPI_FLASH_MISO_PIN &pin_P0_22
#define SPI_FLASH_SCK_PIN &pin_P0_19
#define SPI_FLASH_CS_PIN &pin_P0_23
#endif
#define CIRCUITPY_AUTORELOAD_DELAY_MS 500
#define CIRCUITPY_INTERNAL_NVM_SIZE (4096)
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
#define BOARD_HAS_CRYSTAL 1
#define DEFAULT_I2C_BUS_SCL (&pin_P0_14)
#define DEFAULT_I2C_BUS_SDA (&pin_P0_16)
#define DEFAULT_SPI_BUS_SCK (&pin_P0_13)
#define DEFAULT_SPI_BUS_MOSI (&pin_P0_15)
#define DEFAULT_SPI_BUS_MISO (&pin_P0_20)
#define DEFAULT_UART_BUS_RX (&pin_P0_25)
#define DEFAULT_UART_BUS_TX (&pin_P0_24)

@ -0,0 +1,29 @@
USB_VID = 0x239A
USB_PID = 0x8052
USB_PRODUCT = "ItsyBitsy nRF52840 Express"
USB_MANUFACTURER = "Adafruit Industries LLC"
MCU_SERIES = m4
MCU_VARIANT = nrf52
MCU_SUB_VARIANT = nrf52840
MCU_CHIP = nrf52840
SD ?= s140
SOFTDEV_VERSION ?= 6.1.0
BOOT_SETTING_ADDR = 0xFF000
ifeq ($(SD),)
LD_FILE = boards/nrf52840_1M_256k.ld
else
LD_FILE = boards/adafruit_$(MCU_SUB_VARIANT)_$(SD_LOWER)_v$(firstword $(subst ., ,$(SOFTDEV_VERSION))).ld
CIRCUITPY_BLEIO = 1
endif
NRF_DEFINES += -DNRF52840_XXAA -DNRF52840
# Don't use up a hardware SPI peripheral for the status DotStar: we only have one or two.
CIRCUITPY_BITBANG_APA102 = 1
QSPI_FLASH_FILESYSTEM = 1
EXTERNAL_FLASH_DEVICE_COUNT = 1
EXTERNAL_FLASH_DEVICES = "GD25Q16C"

@ -0,0 +1,46 @@
#include "shared-bindings/board/__init__.h"
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_P0_04) },
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_P0_30) },
{ MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_P0_28) },
{ MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_P0_31) },
{ MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_P0_02) },
{ MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_P0_03) },
{ MP_ROM_QSTR(MP_QSTR_SWITCH), MP_ROM_PTR(&pin_P0_29) },
{ MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_P0_25) },
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_P0_25) },
{ MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_P0_24) },
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_P0_24) },
{ MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_P1_02) },
{ MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_P0_27) },
{ MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_P1_08) },
{ MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_P0_07) },
{ MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_P0_05) },
{ MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_P0_26) },
{ MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_P0_11) },
{ MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_P0_12) },
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_P0_14) },
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_P0_16) },
{ MP_ROM_QSTR(MP_QSTR_APA102_MOSI), MP_ROM_PTR(&pin_P0_08) },
{ MP_ROM_QSTR(MP_QSTR_APA102_SCK), MP_ROM_PTR(&pin_P1_09) },
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_P0_13) },
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_P0_15) },
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_P0_20) },
{ MP_ROM_QSTR(MP_QSTR_L), MP_ROM_PTR(&pin_P0_06) },
{ MP_ROM_QSTR(MP_QSTR_BLUE_LED), MP_ROM_PTR(&pin_P0_06) },
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
};
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

@ -31,7 +31,6 @@
#define MICROPY_HW_BOARD_NAME "MakerDiary nRF52840 MDK"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "MakerDiary52840MDK"
#define MICROPY_QSPI_DATA0 NRF_GPIO_PIN_MAP(1, 5)
#define MICROPY_QSPI_DATA1 NRF_GPIO_PIN_MAP(1, 4)

@ -31,7 +31,6 @@
#define MICROPY_HW_BOARD_NAME "MakerDiary nRF52840 MDK USB Dongle"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "MakerDiary52840MDKDongle"
#define CIRCUITPY_AUTORELOAD_DELAY_MS 500

@ -29,7 +29,6 @@
#define MICROPY_HW_BOARD_NAME "Adafruit Metro nRF52840 Express"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "Metro52840Express"
#define FLASH_SIZE (0x100000)
#define FLASH_PAGE_SIZE (4096)

@ -29,7 +29,6 @@
#define MICROPY_HW_BOARD_NAME "Particle Argon"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "Particle Argon"
#define MICROPY_HW_LED_STATUS (&pin_P1_12)

@ -29,7 +29,6 @@
#define MICROPY_HW_BOARD_NAME "Particle Boron"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "Particle Boron"
#define MICROPY_HW_LED_STATUS (&pin_P1_12)

@ -29,7 +29,6 @@
#define MICROPY_HW_BOARD_NAME "Particle Xenon"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "Particle Xenon"
#define MICROPY_HW_LED_STATUS (&pin_P1_12)

@ -28,7 +28,6 @@
#define MICROPY_HW_BOARD_NAME "PCA10056 nRF52840-DK"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "nRF52840-DK"
#define CIRCUITPY_AUTORELOAD_DELAY_MS 500

@ -26,7 +26,6 @@
#define MICROPY_HW_BOARD_NAME "PCA10059 nRF52840 Dongle"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "nRF52840-DK"
#define MICROPY_HW_LED_STATUS (&pin_P0_06)

@ -28,7 +28,6 @@
#define MICROPY_HW_BOARD_NAME "SparkFun Pro nRF52840 Mini"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "SFE_NRF52840_Mini"
#define CIRCUITPY_AUTORELOAD_DELAY_MS 500

@ -91,8 +91,8 @@ void reset_pin_number(uint8_t pin_number) {
}
#endif
#ifdef MICROPY_HW_APA102_MOSI
if (pin == MICROPY_HW_APA102_MOSI->number ||
pin == MICROPY_HW_APA102_SCK->number) {
if (pin_number == MICROPY_HW_APA102_MOSI->number ||
pin_number == MICROPY_HW_APA102_SCK->number) {
apa102_mosi_in_use = apa102_mosi_in_use && pin_number != MICROPY_HW_APA102_MOSI->number;
apa102_sck_in_use = apa102_sck_in_use && pin_number != MICROPY_HW_APA102_SCK->number;
if (!apa102_sck_in_use && !apa102_mosi_in_use) {

@ -30,6 +30,10 @@
#include "ble_drv.h"
#ifdef NRF52840
#define MICROPY_PY_SYS_PLATFORM "nRF52840"
#endif
#define MICROPY_PY_COLLECTIONS_ORDEREDDICT (1)
#define MICROPY_PY_FUNCTION_ATTRS (1)
#define MICROPY_PY_IO (1)

@ -121,7 +121,7 @@ LIBS += -lm
endif
# TinyUSB defines
CFLAGS += -DHSE_VALUE=8000000 -DCFG_TUSB_MCU=OPT_MCU_STM32F4 -DCFG_TUD_CDC_RX_BUFSIZE=1024 -DCFG_TUD_CDC_TX_BUFSIZE=1024 -DCFG_TUD_MSC_BUFSIZE=4096 -DCFG_TUD_MIDI_RX_BUFSIZE=128 -DCFG_TUD_MIDI_TX_BUFSIZE=128
CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_STM32F4 -DCFG_TUD_CDC_RX_BUFSIZE=1024 -DCFG_TUD_CDC_TX_BUFSIZE=1024 -DCFG_TUD_MSC_BUFSIZE=4096 -DCFG_TUD_MIDI_RX_BUFSIZE=128 -DCFG_TUD_MIDI_TX_BUFSIZE=128
######################################

@ -0,0 +1,38 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be in