Added board definition for Capable Robot Programmable USB Hub

crypto-aes
Chris Osterwood 4 years ago
parent 36e2faf8d2
commit 420dbafa9d

@ -0,0 +1,39 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "boards/board.h"
#include "mpconfigboard.h"
#include "hal/include/hal_gpio.h"
void board_init(void) {
}
bool board_requests_safe_mode(void) {
return false;
}
void reset_board(void) {
}

@ -0,0 +1,37 @@
#define MICROPY_HW_BOARD_NAME "Capable Robot Programmable USB Hub"
#define MICROPY_HW_MCU_NAME "samd51g19"
#define CIRCUITPY_MCU_FAMILY samd51
#define MICROPY_HW_LED_STATUS (&pin_PA22)
// These are pins not to reset.
// QSPI Data pins
#define MICROPY_PORT_A (PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11)
// QSPI CS, and QSPI SCK
#define MICROPY_PORT_B (PORT_PB10 | PORT_PB11)
#define MICROPY_PORT_C (0)
#define MICROPY_PORT_D (0)
#define AUTORESET_DELAY_MS 500
// If you change this, then make sure to update the linker scripts as well to
// make sure you don't overwrite code
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
#define DEFAULT_I2C_BUS_SDA (&pin_PA22)
#define DEFAULT_SPI_BUS_SCK (&pin_PA01)
#define DEFAULT_SPI_BUS_MOSI (&pin_PA00)
#define DEFAULT_SPI_BUS_MISO (&pin_PB23)
#define DEFAULT_UART_BUS_RX (&pin_PA16)
#define DEFAULT_UART_BUS_TX (&pin_PA17)
// USB is always used internally so skip the pin objects for it.
#define IGNORE_PIN_PA24 1
#define IGNORE_PIN_PA25 1

@ -0,0 +1,18 @@
LD_FILE = boards/samd51x19-bootloader-external-flash.ld
USB_VID = 0x04D8
USB_PID = 0xEDB3
USB_PRODUCT = "Programmable USB Hub"
USB_MANUFACTURER = "Capable Robot Components"
QSPI_FLASH_FILESYSTEM = 1
EXTERNAL_FLASH_DEVICE_COUNT = 1
EXTERNAL_FLASH_DEVICES = GD25Q16C
LONGINT_IMPL = MPZ
# No I2S on SAMD51G
CIRCUITPY_AUDIOBUSIO = 0
# No touch on SAMD51 yet
CIRCUITPY_TOUCHIO = 0
CHIP_VARIANT = SAMD51G19A
CHIP_FAMILY = samd51

@ -0,0 +1,36 @@
#include "shared-bindings/board/__init__.h"
STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{ MP_OBJ_NEW_QSTR(MP_QSTR_ANMB), MP_ROM_PTR(&pin_PA02) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_ANVLIM), MP_ROM_PTR(&pin_PA04) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_AN5V), MP_ROM_PTR(&pin_PA05) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_MBPWM), MP_ROM_PTR(&pin_PA14) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_MBINT), MP_ROM_PTR(&pin_PA15) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_MBCS), MP_ROM_PTR(&pin_PA18) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_MBRST), MP_ROM_PTR(&pin_PB09) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_LED1), MP_ROM_PTR(&pin_PA19) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_LED2), MP_ROM_PTR(&pin_PA20) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_LED3), MP_ROM_PTR(&pin_PA21) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA16) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA17) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_USBHEN), MP_ROM_PTR(&pin_PA07) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_USBRST), MP_ROM_PTR(&pin_PB08) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA22) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA23) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_SDA2), MP_ROM_PTR(&pin_PA12) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_SCL2), MP_ROM_PTR(&pin_PA13) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA01) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA00) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB23) },
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
};
MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);
Loading…
Cancel
Save