stm32: add PulseIn module

crypto-aes
Lucian Copeland 3 years ago
parent b4e1955526
commit 2b161d37df
  1. 263
      ports/stm32f4/common-hal/pulseio/PulseIn.c
  2. 3
      ports/stm32f4/common-hal/pulseio/PulseIn.h
  3. 2
      ports/stm32f4/supervisor/port.c

@ -34,46 +34,295 @@
#include "shared-bindings/pulseio/PulseIn.h"
#include "tick.h"
#include "stm32f4xx_hal.h"
#define STM32_GPIO_PORT_SIZE 16
static pulseio_pulsein_obj_t* _objs[STM32_GPIO_PORT_SIZE];
static void assign_EXTI_Interrupt(pulseio_pulsein_obj_t* self, uint8_t num);
static void pulsein_handler(uint8_t num) {
// Grab the current time first.
uint32_t current_us;
uint64_t current_ms;
current_tick(&current_ms, &current_us);
// current_tick gives us the remaining us until the next tick but we want the number since the last ms.
current_us = 1000 - current_us;
pulseio_pulsein_obj_t* self = _objs[num];
if ( !self ) return;
if (self->first_edge) {
// first pulse is opposite state from idle
bool state = HAL_GPIO_ReadPin(pin_port(self->pin->port), pin_mask(self->pin->number));
if ( self->idle_state != state ) {
self->first_edge = false;
}
} else {
uint32_t ms_diff = current_ms - self->last_ms;
uint16_t us_diff = current_us - self->last_us;
uint32_t total_diff = us_diff;
if (self->last_us > current_us) {
total_diff = 1000 + current_us - self->last_us;
if (ms_diff > 1) {
total_diff += (ms_diff - 1) * 1000;
}
} else {
total_diff += ms_diff * 1000;
}
uint16_t duration = 0xffff;
if (total_diff < duration) {
duration = total_diff;
}
uint16_t i = (self->start + self->len) % self->maxlen;
self->buffer[i] = duration;
if (self->len < self->maxlen) {
self->len++;
} else {
self->start++;
}
}
self->last_ms = current_ms;
self->last_us = current_us;
}
void pulsein_reset(void) {
// Disable all active interrupts and clear array
for (uint i = 0; i < STM32_GPIO_PORT_SIZE; i++) {
if (_objs[i] != NULL) {
HAL_NVIC_DisableIRQ(_objs[i]->irq);
}
}
memset(_objs, 0, sizeof(_objs));
}
void common_hal_pulseio_pulsein_construct(pulseio_pulsein_obj_t* self, const mcu_pin_obj_t* pin,
uint16_t maxlen, bool idle_state) {
mp_raise_NotImplementedError(translate("PulseIn not yet supported"));
// STM32 has one shared EXTI for each pin number, 0-15
uint8_t p_num = pin->number;
if(_objs[p_num]) {
mp_raise_ValueError(translate("Pin number already reserved by EXTI"));
}
_objs[p_num] = self;
// Allocate pulse buffer
self->buffer = (uint16_t *) m_malloc(maxlen * sizeof(uint16_t), false);
if (self->buffer == NULL) {
mp_raise_msg_varg(&mp_type_MemoryError, translate("Failed to allocate RX buffer of %d bytes"),
maxlen * sizeof(uint16_t));
}
// Set internal variables
self->pin = pin;
self->maxlen = maxlen;
self->idle_state = idle_state;
self->start = 0;
self->len = 0;
self->first_edge = true;
self->paused = false;
self->last_us = 0;
self->last_ms = 0;
// EXTI pins can also be read as an input
GPIO_InitTypeDef GPIO_InitStruct = {0};
GPIO_InitStruct.Pin = pin_mask(pin->number);
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(pin_port(pin->port), &GPIO_InitStruct);
// Interrupt starts immediately
assign_EXTI_Interrupt(self, pin->number);
HAL_NVIC_EnableIRQ(self->irq);
claim_pin(pin);
}
bool common_hal_pulseio_pulsein_deinited(pulseio_pulsein_obj_t* self) {
return true;
return (self->pin == NULL);
}
void common_hal_pulseio_pulsein_deinit(pulseio_pulsein_obj_t* self) {
if (common_hal_pulseio_pulsein_deinited(self)) {
return;
}
HAL_NVIC_DisableIRQ(self->irq);
_objs[self->pin->number] = NULL;
reset_pin_number(self->pin->port, self->pin->number);
self->pin = NULL;
}
void common_hal_pulseio_pulsein_pause(pulseio_pulsein_obj_t* self) {
HAL_NVIC_DisableIRQ(self->irq);
self->paused = true;
}
void common_hal_pulseio_pulsein_resume(pulseio_pulsein_obj_t* self, uint16_t trigger_duration) {
// Make sure we're paused.
if ( !self->paused ) {
common_hal_pulseio_pulsein_pause(self);
}
// Send the trigger pulse.
if (trigger_duration > 0) {
GPIO_InitTypeDef GPIO_InitStruct = {0};
GPIO_InitStruct.Pin = pin_mask(self->pin->number);
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(pin_port(self->pin->port), &GPIO_InitStruct);
HAL_GPIO_WritePin(pin_port(self->pin->port), pin_mask(self->pin->number), !self->idle_state);
common_hal_mcu_delay_us((uint32_t)trigger_duration);
HAL_GPIO_WritePin(pin_port(self->pin->port), pin_mask(self->pin->number), self->idle_state);
GPIO_InitStruct.Pin = pin_mask(self->pin->number);
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(pin_port(self->pin->port), &GPIO_InitStruct);
}
self->first_edge = true;
self->paused = false;
self->last_ms = 0;
self->last_us = 0;
HAL_NVIC_EnableIRQ(self->irq);
}
void common_hal_pulseio_pulsein_clear(pulseio_pulsein_obj_t* self) {
HAL_NVIC_DisableIRQ(self->irq);
self->start = 0;
self->len = 0;
HAL_NVIC_EnableIRQ(self->irq);
}
uint16_t common_hal_pulseio_pulsein_get_item(pulseio_pulsein_obj_t* self, int16_t index) {
return 0;
HAL_NVIC_DisableIRQ(self->irq);
if (index < 0) {
index += self->len;
}
if (index < 0 || index >= self->len) {
HAL_NVIC_EnableIRQ(self->irq);
mp_raise_IndexError(translate("index out of range"));
}
uint16_t value = self->buffer[(self->start + index) % self->maxlen];
HAL_NVIC_EnableIRQ(self->irq);
return value;
}
uint16_t common_hal_pulseio_pulsein_popleft(pulseio_pulsein_obj_t* self) {
return 0;
if (self->len == 0) {
mp_raise_IndexError(translate("pop from an empty PulseIn"));
}
HAL_NVIC_DisableIRQ(self->irq);
uint16_t value = self->buffer[self->start];
self->start = (self->start + 1) % self->maxlen;
self->len--;
HAL_NVIC_EnableIRQ(self->irq);
return value;
}
uint16_t common_hal_pulseio_pulsein_get_maxlen(pulseio_pulsein_obj_t* self) {
return 0;
return self->maxlen;
}
bool common_hal_pulseio_pulsein_get_paused(pulseio_pulsein_obj_t* self) {
return 0;
return self->paused;
}
uint16_t common_hal_pulseio_pulsein_get_len(pulseio_pulsein_obj_t* self) {
return 0;
return self->len;
}
static void assign_EXTI_Interrupt(pulseio_pulsein_obj_t* self, uint8_t num) {
if (num == 0) {
self->irq = EXTI0_IRQn;
} else if (num == 1) {
self->irq = EXTI1_IRQn;
} else if (num == 2) {
self->irq = EXTI2_IRQn;
} else if (num == 3) {
self->irq = EXTI3_IRQn;
} else if (num == 4) {
self->irq = EXTI4_IRQn;
} else if (num >= 5 && num <= 9 ) {
self->irq = EXTI9_5_IRQn;
} else if (num >= 10 && num <= 15) {
self->irq = EXTI15_10_IRQn;
}
}
void EXTI0_IRQHandler(void)
{
EXTI->PR = 1 << 0;
pulsein_handler(0);
}
void EXTI1_IRQHandler(void)
{
EXTI->PR = 1 << 1;
pulsein_handler(1);
}
void EXTI2_IRQHandler(void)
{
EXTI->PR = 1 << 2;
pulsein_handler(2);
}
void EXTI3_IRQHandler(void)
{
EXTI->PR = 1 << 3;
pulsein_handler(3);
}
void EXTI4_IRQHandler(void)
{
EXTI->PR = 1 << 4;
pulsein_handler(4);
}
void EXTI9_5_IRQHandler(void)
{
uint32_t pending = EXTI->PR;
if(pending & (1 << 5)) {
EXTI->PR = 1 << 5;
pulsein_handler(5);
} else if (pending & (1 << 6)) {
EXTI->PR = 1 << 6;
pulsein_handler(6);
} else if (pending & (1 << 7)) {
EXTI->PR = 1 << 7;
pulsein_handler(7);
} else if (pending & (1 << 8)) {
EXTI->PR = 1 << 8;
pulsein_handler(8);
} else if (pending & (1 << 9)) {
EXTI->PR = 1 << 9;
pulsein_handler(9);
}
}
void EXTI15_10_IRQHandler(void)
{
uint32_t pending = EXTI->PR;
if(pending & (1 << 10)) {
EXTI->PR = 1 << 10;
pulsein_handler(10);
} else if (pending & (1 << 11)) {
EXTI->PR = 1 << 11;
pulsein_handler(11);
} else if (pending & (1 << 12)) {
EXTI->PR = 1 << 12;
pulsein_handler(12);
} else if (pending & (1 << 13)) {
EXTI->PR = 1 << 13;
pulsein_handler(13);
} else if (pending & (1 << 14)) {
EXTI->PR = 1 << 14;
pulsein_handler(14);
} else if (pending & (1 << 15)) {
EXTI->PR = 1 << 15;
pulsein_handler(15);
}
}

@ -34,7 +34,8 @@
typedef struct {
mp_obj_base_t base;
uint8_t pin;
const mcu_pin_obj_t* pin;
IRQn_Type irq;
bool idle_state;
bool paused;
volatile bool first_edge;

@ -36,6 +36,7 @@
#include "common-hal/busio/UART.h"
#include "common-hal/pulseio/PWMOut.h"
#include "common-hal/pulseio/PulseOut.h"
#include "common-hal/pulseio/PulseIn.h"
#include "stm32f4/clocks.h"
#include "stm32f4/gpio.h"
@ -62,6 +63,7 @@ void reset_port(void) {
uart_reset();
pwmout_reset();
pulseout_reset();
pulsein_reset();
}
void reset_to_bootloader(void) {

Loading…
Cancel
Save