Merge pull request #2083 from dhalbert/no-32khz-xtal

Fix CPBlue LFCLKSRC; CPB has no status neopixel

ports/nrf/boards/circuitplayground_bluefruit/mpconfigboard.h

@@ -34,10 +34,11 @@
 #define FLASH_SIZE                  (0x100000)
 #define FLASH_PAGE_SIZE             (4096)
 
-#define MICROPY_HW_NEOPIXEL         (&pin_P0_13)
-
 #define MICROPY_HW_LED_STATUS       (&pin_P1_14)
 
+// Unusually, board does not have a 32 kHz xtal. Nearly all boards do.
+#define BOARD_HAS_32KHZ_XTAL (0)
+
 #if QSPI_FLASH_FILESYSTEM
 #define MICROPY_QSPI_DATA0                NRF_GPIO_PIN_MAP(0, 21)
 #define MICROPY_QSPI_DATA1                NRF_GPIO_PIN_MAP(0, 23)
@@ -60,8 +61,6 @@
 
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 
-#define BOARD_HAS_CRYSTAL 1
-
 #define DEFAULT_I2C_BUS_SCL         (&pin_P0_04)
 #define DEFAULT_I2C_BUS_SDA         (&pin_P0_05)
 

ports/nrf/common-hal/bleio/Adapter.c

@@ -39,37 +39,26 @@
 #include "supervisor/usb.h"
 #include "shared-bindings/bleio/Adapter.h"
 #include "shared-bindings/bleio/Address.h"
-#include "mpconfigboard.h" // for BOARD_HAS_CRYSTAL
 
 STATIC void softdevice_assert_handler(uint32_t id, uint32_t pc, uint32_t info) {
     mp_raise_msg_varg(&mp_type_AssertionError,
                       translate("Soft device assert, id: 0x%08lX, pc: 0x%08lX"), id, pc);
 }
 
-static inline bool board_has_crystal(void) {
-#ifdef BOARD_HAS_CRYSTAL
-    return BOARD_HAS_CRYSTAL == 1;
+STATIC uint32_t ble_stack_enable(void) {
+    nrf_clock_lf_cfg_t clock_config = {
+#if BOARD_HAS_32KHZ_XTAL
+        .source       = NRF_CLOCK_LF_SRC_XTAL,
+        .rc_ctiv      = 0,
+        .rc_temp_ctiv = 0,
+        .accuracy     = NRF_CLOCK_LF_ACCURACY_20_PPM,
 #else
-    return false;
+        .source       = NRF_CLOCK_LF_SRC_RC,
+        .rc_ctiv      = 16,
+        .rc_temp_ctiv = 2,
+        .accuracy     = NRF_CLOCK_LF_ACCURACY_250_PPM,
 #endif
-}
-
-STATIC uint32_t ble_stack_enable(void) {
-    nrf_clock_lf_cfg_t clock_config;
-
-    // Set low-frequency clock source to be either an external 32.768kHz crystal if one exists on the board
-    // or an internal 32.768 kHz RC oscillator otherwise
-    if (board_has_crystal()) {
-        clock_config = (nrf_clock_lf_cfg_t){
-            .source = NRF_CLOCK_LF_SRC_XTAL,
-            .accuracy = NRF_CLOCK_LF_ACCURACY_20_PPM};
-    } else {
-        clock_config = (nrf_clock_lf_cfg_t){
-            .source = NRF_CLOCK_LF_SRC_RC,
-            .rc_ctiv = 16,
-            .rc_temp_ctiv = 2,
-            .accuracy = NRF_CLOCK_LF_ACCURACY_250_PPM};
-    }
+    };
 
     uint32_t err_code = sd_softdevice_enable(&clock_config, softdevice_assert_handler);
     if (err_code != NRF_SUCCESS)

ports/nrf/common-hal/bleio/Characteristic.c

@@ -183,7 +183,7 @@ void common_hal_bleio_characteristic_set_value(bleio_characteristic_obj_t *self,
                                          (self->props & CHAR_PROP_WRITE_NO_RESPONSE));
         } else {
             if (self->fixed_length && bufinfo->len != self->max_length) {
-                mp_raise_ValueError(translate("Value length  required fixed length"));
+                mp_raise_ValueError(translate("Value length != required fixed length"));
             }
             if (bufinfo->len > self->max_length) {
                 mp_raise_ValueError(translate("Value length > max_length"));

ports/nrf/mpconfigport.h

@@ -53,6 +53,11 @@
 
 #include "py/circuitpy_mpconfig.h"
 
+#ifndef BOARD_HAS_32KHZ_XTAL
+// Assume crystal is present, which is the most common case.
+#define BOARD_HAS_32KHZ_XTAL (1)
+#endif
+
 #define MICROPY_PORT_ROOT_POINTERS \
     CIRCUITPY_COMMON_ROOT_POINTERS \
     ble_drv_evt_handler_entry_t* ble_drv_evt_handler_entries; \

ports/nrf/peripherals/nrf/clocks.c

@@ -26,21 +26,15 @@
  */
 
 #include "nrfx.h"
-#include "mpconfigboard.h" // for BOARD_HAS_CRYSTAL
+#include "mpconfigport.h"
 
-static inline bool board_has_crystal(void) {
-#ifdef BOARD_HAS_CRYSTAL
-    return BOARD_HAS_CRYSTAL == 1;
+void nrf_peripherals_clocks_init(void) {
+
+#if BOARD_HAS_32KHZ_XTAL
+    NRF_CLOCK->LFCLKSRC = (uint32_t)((CLOCK_LFCLKSRC_SRC_Xtal << CLOCK_LFCLKSRC_SRC_Pos) & CLOCK_LFCLKSRC_SRC_Msk);
 #else
-    return false;
+    NRF_CLOCK->LFCLKSRC = (uint32_t)((CLOCK_LFCLKSRC_SRC_RC << CLOCK_LFCLKSRC_SRC_Pos) & CLOCK_LFCLKSRC_SRC_Msk);
 #endif
-}
-
-void nrf_peripherals_clocks_init(void) {
-    // Set low-frequency clock source to be either an external 32.768kHz crystal if one exists on the board
-    // or an internal 32.768 kHz RC oscillator otherwise
-    uint32_t clock_src = board_has_crystal() ? CLOCK_LFCLKSRC_SRC_Xtal : CLOCK_LFCLKSRC_SRC_RC;
-    NRF_CLOCK->LFCLKSRC = (uint32_t)((clock_src << CLOCK_LFCLKSRC_SRC_Pos) & CLOCK_LFCLKSRC_SRC_Msk);
     NRF_CLOCK->TASKS_LFCLKSTART = 1UL;
 
     // Wait for clocks to start.