Adds make config files for SparkFun LumiDrive and Redboard Turbo

crypto-aes
Elias Santistevan 4 years ago
parent 765d877dfa
commit 178cfc1623

@ -0,0 +1,38 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "boards/board.h"
void board_init(void)
{
}
bool board_requests_safe_mode(void) {
return false;
}
void reset_board(void) {
}

@ -0,0 +1,51 @@
#define MICROPY_HW_BOARD_NAME "SparkFun LUMIDrive"
#define MICROPY_HW_MCU_NAME "samd21g18"
//#define MICROPY_HW_NEOPIXEL (&pin_PA06)
// Clock rates are off: Salae reads 12MHz which is the limit even though we set it to the safer 8MHz.
#define SPI_FLASH_BAUDRATE (8000000)
#define SPI_FLASH_MOSI_PIN &PIN_PA08
#define SPI_FLASH_MISO_PIN &PIN_PA14
#define SPI_FLASH_SCK_PIN &PIN_PA09
#define SPI_FLASH_CS_PIN &PIN_PA13
// All port(pin) definitions should be deleted unless PA06 -- SERCOM0/PAD[2]
// Will need to scour the repo to figure out why this was done.
// I'm guessing these ports are defined elsewehere by default rather than needing to
// repeatedly define them. Saves time to name outliers than participants in
// some cases.
#define MICROPY_PORT_A ( 0 )
#define MICROPY_PORT_B ( 0 )
#define MICROPY_PORT_C ( 0 )
// If you change this, then make sure to update the linker scripts as well to
// make sure you don't overwrite code.
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
#define BOARD_HAS_CRYSTAL 1
// The LUMIDrive board exposed pins are limited, and I2C, TX/RX, and SPI are not
// really exposed but if they are not define (and included in pins.h), Python
// won't start/operate. So define here:
//I2C
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
#define DEFAULT_I2C_BUS_SDA (&pin_PA22)
//SPI
#define DEFAULT_SPI_BUS_SCK (&pin_PA19)
#define DEFAULT_SPI_BUS_MOSI (&pin_PA18)
#define DEFAULT_SPI_BUS_MISO (&pin_PA21)
//UART
#define DEFAULT_UART_BUS_RX (&pin_PA11)
#define DEFAULT_UART_BUS_TX (&pin_PA10)
// USB is always used internally so skip the pin objects for it.
#define IGNORE_PIN_PA24 1
#define IGNORE_PIN_PA25 1

@ -0,0 +1,17 @@
LD_FILE = boards/samd21x18-bootloader-external-flash.ld
USB_VID = 0x1B4F
USB_PID = 0x0017
USB_PRODUCT = "LUMIDrive Board"
USB_MANUFACTURER = "SparkFun Electronics"
SPI_FLASH_FILESYSTEM = 1
LONGINT_IMPL = MPZ
CHIP_VARIANT = SAMD21G18A
CHIP_FAMILY = samd21
EXTERNAL_FLASH_DEVICE_COUNT = 1
EXTERNAL_FLASH_DEVICES = "W25Q32FV"
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_DotStar

@ -0,0 +1,21 @@
#include "shared-bindings/board/__init__.h"
#include "board_busses.h"
STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA04) },
{ MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA05) },
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA19) }, //
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA18) }, //
{ MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA11) }, //
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA11) },
{ MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA10) },
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA10) },
{ MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA20) }, //
{ MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PA06) }, //
{ MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PA07) },
{ MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA18) },
{ MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA17) }, //
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
};
MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);

@ -0,0 +1,38 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "boards/board.h"
void board_init(void)
{
}
bool board_requests_safe_mode(void) {
return false;
}
void reset_board(void) {
}

@ -0,0 +1,100 @@
#define MICROPY_HW_BOARD_NAME "SparkFun RedBoard Turbo"
#define MICROPY_HW_MCU_NAME "samd21g18"
#define MICROPY_HW_LED_TX &pin_PA27
#define MICROPY_HW_LED_RX &pin_PA31
#define MICROPY_HW_NEOPIXEL (&pin_PA30)
// Clock rates are off: Salae reads 12MHz which is the limit even though we set it to the safer 8MHz.
#define SPI_FLASH_BAUDRATE (8000000)
//
// SPI Flash definitions. The flash SPI MOSI, MISO and SCK need to be on the
// same SERCOM - check the SAMD21 spec to determien which SERCOM to use
// (post PINs have 2 SERCOMS to work with)
//
#define SPI_FLASH_MOSI_PIN &pin_PB22
#define SPI_FLASH_MISO_PIN &pin_PB03
#define SPI_FLASH_SCK_PIN &pin_PB23
#define SPI_FLASH_CS_PIN &pin_PA13
// #define SPI_FLASH_MOSI_PIN_FUNCTION PINMUX_PB22D_SERCOM5_PAD2
// #define SPI_FLASH_MISO_PIN_FUNCTION PINMUX_PB03D_SERCOM5_PAD1
// #define SPI_FLASH_SCK_PIN_FUNCTION PINMUX_PB23D_SERCOM5_PAD3
// #define SPI_FLASH_SERCOM SERCOM5
// #define SPI_FLASH_SERCOM_INDEX 5
// #define SPI_FLASH_MOSI_PAD 2
// #define SPI_FLASH_MISO_PAD 1
// #define SPI_FLASH_SCK_PAD 3
// // <o> Transmit Data Pinout
// //
// // The logic for DOPO and DIPO is the following
// // In master SPI operation
// // DIPO <pad #> = MISO
// // DOPO - Based on the below table, where
// // <DOPO> = [MOSI PAD, SCK PAD]
// // <0x0> = PAD[0,1]
// // <0x1> = PAD[2,3]
// // <0x2> = PAD[3,1]
// // <0x3> = PAD[0,3]
// //
// /// For the RedBoard Turbo Board DOPO [2,3] => 1
// #define SPI_FLASH_DOPO 1
// #define SPI_FLASH_DIPO 1 // same as MISO pad
// These are pins not to reset.
// This map to the pins as defined above for FLASH. Note the PORT letters - assign A-to-A, B-to-B ..etc
// PA24 and PA25 are for USB
#define MICROPY_PORT_A ( 0 )
#define MICROPY_PORT_B ( 0 )
#define MICROPY_PORT_C ( 0 )
// If you change this, then make sure to update the linker scripts as well to
// make sure you don't overwrite code.
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
// What external flash device is being used on this board?
// The devices are defined in "exteral_flash/devices.h", which
// contains a flash struct def and a list of #defines for each
// supported/defined flash module.
//
// This board - the LUMIDrive - uses a W25Q32FV component. It's
// definition was added to devices.h, based on the winbond spec sheet.
//
// You can list N number of devices - just update the count define and comma
// seperate the EXTERNAL_FLASH_DEVICES list of devices.
// #define EXTERNAL_FLASH_DEVICE_COUNT 1
// #define EXTERNAL_FLASH_DEVICES W25Q32FV
#define BOARD_HAS_CRYSTAL 1
// I2C - also QWIIC
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
#define DEFAULT_I2C_BUS_SDA (&pin_PA22)
#define DEFAULT_SPI_BUS_SCK (&pin_PB11)
#define DEFAULT_SPI_BUS_MOSI (&pin_PB10)
#define DEFAULT_SPI_BUS_MISO (&pin_PA12)
#define DEFAULT_UART_BUS_RX (&pin_PA11)
#define DEFAULT_UART_BUS_TX (&pin_PA10)
// USB is always used internally so skip the pin objects for it.
#define IGNORE_PIN_PA24 1
#define IGNORE_PIN_PA25 1

@ -0,0 +1,14 @@
LD_FILE = boards/samd21x18-bootloader-external-flash.ld
USB_VID = 0x1B4F
USB_PID = 0x0015
USB_PRODUCT = "RedBoard Turbo Board"
USB_MANUFACTURER = "SparkFun Electronics"
SPI_FLASH_FILESYSTEM = 1
LONGINT_IMPL = MPZ
CHIP_VARIANT = SAMD21G18A
CHIP_FAMILY = samd21
EXTERNAL_FLASH_DEVICE_COUNT = 1
EXTERNAL_FLASH_DEVICES = "W25Q32FV"

@ -0,0 +1,38 @@
#include "shared-bindings/board/__init__.h"
#include "board_busses.h"
STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA02) },
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PB08) },
{ MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PB09) },
{ MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA04) },
{ MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA05) },
{ MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PB02) },
{ MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA11) },
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA11) },
{ MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA10) },
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA10) },
{ MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA14) },
{ MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA09) },
{ MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA08) },
{ MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA15) },
{ MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA20) },
{ MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PA21) },
{ MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PA06) },
{ MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PA07) },
{ MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA18) },
{ MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA16) },
{ MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_PA19) },
{ MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA17) },
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA22) },
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA23) },
{ MP_ROM_QSTR(MP_QSTR_RGB_LED), MP_ROM_PTR(&pin_PA30) },
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PB11) },
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PB10) },
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA12) },
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
};
MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);
Loading…
Cancel
Save