You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

292 lines
10 KiB

/*
* This file is part of the Micro Python project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2016 Scott Shawcroft for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdint.h>
#include "shared-bindings/busio/UART.h"
#include "lib/utils/context_manager_helpers.h"
#include "py/ioctl.h"
#include "py/runtime.h"
#include "py/stream.h"
#include "shared-bindings/microcontroller/Pin.h"
//| .. currentmodule:: busio
//|
//| :class:`UART` -- a bidirectional serial protocol
//| =================================================
//|
//|
//| .. class:: UART(tx, rx, \*, baudrate=9600, bits=8, parity=None, stop=1, timeout=1000, receiver_buffer_size=64)
//|
//| A common bidirectional serial protocol that uses an an agreed upon speed
//| rather than a shared clock line.
//|
//| :param ~microcontroller.Pin tx: the pin to transmit with
//| :param ~microcontroller.Pin rx: the pin to receive on
//| :param int baudrate: the transmit and receive speed
/// :param int bits: the number of bits per byte, 7, 8 or 9.
/// :param Parity parity: the parity used for error checking
/// :param int stop: the number of stop bits, 1 or 2.
/// :param int timeout: the timeout in milliseconds to wait for the first character and between subsequent characters.
/// :param int receiver_buffer_size: the character length of the read buffer (0 to disable). (When a character is 9 bits the buffer will be 2 * receiver_buffer_size bytes.)
//|
typedef struct {
mp_obj_base_t base;
} busio_uart_parity_obj_t;
extern const busio_uart_parity_obj_t busio_uart_parity_even_obj;
extern const busio_uart_parity_obj_t busio_uart_parity_odd_obj;
STATIC mp_obj_t busio_uart_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *pos_args) {
mp_arg_check_num(n_args, n_kw, 0, MP_OBJ_FUN_ARGS_MAX, true);
busio_uart_obj_t *self = m_new_obj(busio_uart_obj_t);
self->base.type = &busio_uart_type;
mp_map_t kw_args;
mp_map_init_fixed_table(&kw_args, n_kw, pos_args + n_args);
enum { ARG_tx, ARG_rx, ARG_baudrate, ARG_bits, ARG_parity, ARG_stop, ARG_timeout, ARG_receiver_buffer_size};
static const mp_arg_t allowed_args[] = {
{ MP_QSTR_tx, MP_ARG_REQUIRED | MP_ARG_OBJ },
{ MP_QSTR_rx, MP_ARG_REQUIRED | MP_ARG_OBJ },
{ MP_QSTR_baudrate, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 9600} },
{ MP_QSTR_bits, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 8} },
{ MP_QSTR_parity, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} },
{ MP_QSTR_stop, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 1} },
{ MP_QSTR_timeout, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 1000} },
{ MP_QSTR_receiver_buffer_size, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 64} },
};
mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
mp_arg_parse_all(n_args, pos_args, &kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);
assert_pin(args[ARG_rx].u_obj, true);
const mcu_pin_obj_t* rx = MP_OBJ_TO_PTR(args[ARG_rx].u_obj);
assert_pin_free(rx);
assert_pin(args[ARG_tx].u_obj, true);
const mcu_pin_obj_t* tx = MP_OBJ_TO_PTR(args[ARG_tx].u_obj);
assert_pin_free(tx);
uint8_t bits = args[ARG_bits].u_int;
if (bits < 7 || bits > 9) {
mp_raise_ValueError("bits must be 7, 8 or 9");
}
uart_parity_t parity = PARITY_NONE;
if (args[ARG_parity].u_obj == &busio_uart_parity_even_obj) {
parity = PARITY_EVEN;
} else if (args[ARG_parity].u_obj == &busio_uart_parity_odd_obj) {
parity = PARITY_ODD;
}
uint8_t stop = args[ARG_stop].u_int;
if (stop != 1 && stop != 2) {
mp_raise_ValueError("stop must be 1 or 2");
}
common_hal_busio_uart_construct(self, tx, rx,
args[ARG_baudrate].u_int, bits, parity, stop, args[ARG_timeout].u_int,
args[ARG_receiver_buffer_size].u_int);
return (mp_obj_t)self;
}
//| .. method:: deinit()
//|
//| Deinitialises the UART and releases any hardware resources for reuse.
//|
STATIC mp_obj_t busio_uart_obj_deinit(mp_obj_t self_in) {
busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
common_hal_busio_uart_deinit(self);
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_1(busio_uart_deinit_obj, busio_uart_obj_deinit);
//| .. method:: __enter__()
//|
//| No-op used by Context Managers.
//|
// Provided by context manager helper.
//| .. method:: __exit__()
//|
//| Automatically deinitializes the hardware when exiting a context. See
//| :ref:`lifetime-and-contextmanagers` for more info.
//|
STATIC mp_obj_t busio_uart_obj___exit__(size_t n_args, const mp_obj_t *args) {
(void)n_args;
common_hal_busio_uart_deinit(args[0]);
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_uart___exit___obj, 4, 4, busio_uart_obj___exit__);
// These are standard stream methods. Code is in py/stream.c.
//
//| .. method:: read(nbytes=None)
//|
//| Read characters. If ``nbytes`` is specified then read at most that many
//| bytes. Otherwise, read everything that has been buffered.
//|
//| :return: Data read
//| :rtype: bytes or None
//|
//| .. method:: readinto(buf, nbytes=None)
//|
//| Read bytes into the ``buf``. If ``nbytes`` is specified then read at most
//| that many bytes. Otherwise, read at most ``len(buf)`` bytes.
//|
//| :return: number of bytes read and stored into ``buf``
//| :rtype: bytes or None
//|
//| .. method:: readline()
//|
//| Read a line, ending in a newline character.
//|
//| :return: the line read
//| :rtype: int or None
//|
//| .. method:: write(buf)
//|
//| Write the buffer of bytes to the bus.
//|
//| :return: the number of bytes written
//| :rtype: int or None
//|
// These three methods are used by the shared stream methods.
STATIC mp_uint_t busio_uart_read(mp_obj_t self_in, void *buf_in, mp_uint_t size, int *errcode) {
busio_uart_obj_t *self = self_in;
byte *buf = buf_in;
// make sure we want at least 1 char
if (size == 0) {
return 0;
}
return common_hal_busio_uart_read(self, buf, size, errcode);
}
STATIC mp_uint_t busio_uart_write(mp_obj_t self_in, const void *buf_in, mp_uint_t size, int *errcode) {
busio_uart_obj_t *self = self_in;
const byte *buf = buf_in;
return common_hal_busio_uart_write(self, buf, size, errcode);
}
STATIC mp_uint_t busio_uart_ioctl(mp_obj_t self_in, mp_uint_t request, mp_uint_t arg, int *errcode) {
busio_uart_obj_t *self = self_in;
mp_uint_t ret;
if (request == MP_IOCTL_POLL) {
mp_uint_t flags = arg;
ret = 0;
if ((flags & MP_IOCTL_POLL_RD) && common_hal_busio_uart_rx_characters_available(self) > 0) {
ret |= MP_IOCTL_POLL_RD;
}
if ((flags & MP_IOCTL_POLL_WR) && common_hal_busio_uart_ready_to_tx(self)) {
ret |= MP_IOCTL_POLL_WR;
}
} else {
*errcode = MP_EINVAL;
ret = MP_STREAM_ERROR;
}
return ret;
}
//| .. class:: busio.UART.Parity
//|
//| Enum-like class to define the parity used to verify correct data transfer.
//|
//| .. data:: ODD
//|
//| Total number of ones should be odd.
//|
//| .. data:: EVEN
//|
//| Total number of ones should be even.
//|
const mp_obj_type_t busio_uart_parity_type;
const busio_uart_parity_obj_t busio_uart_parity_odd_obj = {
{ &busio_uart_parity_type },
};
const busio_uart_parity_obj_t busio_uart_parity_even_obj = {
{ &busio_uart_parity_type },
};
STATIC const mp_rom_map_elem_t busio_uart_parity_locals_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR_ODD), MP_ROM_PTR(&busio_uart_parity_odd_obj) },
{ MP_ROM_QSTR(MP_QSTR_EVEN), MP_ROM_PTR(&busio_uart_parity_even_obj) },
};
STATIC MP_DEFINE_CONST_DICT(busio_uart_parity_locals_dict, busio_uart_parity_locals_dict_table);
STATIC void busio_uart_parity_print(const mp_print_t *print, mp_obj_t self_in, mp_print_kind_t kind) {
qstr parity = MP_QSTR_ODD;
if (MP_OBJ_TO_PTR(self_in) == MP_ROM_PTR(&busio_uart_parity_even_obj)) {
parity = MP_QSTR_EVEN;
}
mp_printf(print, "%q.%q.%q.%q", MP_QSTR_busio, MP_QSTR_UART, MP_QSTR_Parity, parity);
}
const mp_obj_type_t busio_uart_parity_type = {
{ &mp_type_type },
.name = MP_QSTR_Parity,
.print = busio_uart_parity_print,
.locals_dict = (mp_obj_t)&busio_uart_parity_locals_dict,
};
STATIC const mp_rom_map_elem_t busio_uart_locals_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR_deinit), MP_ROM_PTR(&busio_uart_deinit_obj) },
{ MP_ROM_QSTR(MP_QSTR___enter__), MP_ROM_PTR(&default___enter___obj) },
{ MP_ROM_QSTR(MP_QSTR___exit__), MP_ROM_PTR(&busio_uart___exit___obj) },
// Standard stream methods.
{ MP_OBJ_NEW_QSTR(MP_QSTR_read), MP_ROM_PTR(&mp_stream_read_obj) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_readline), MP_ROM_PTR(&mp_stream_unbuffered_readline_obj)},
{ MP_OBJ_NEW_QSTR(MP_QSTR_readinto), MP_ROM_PTR(&mp_stream_readinto_obj) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_write), MP_ROM_PTR(&mp_stream_write_obj) },
// Nested Enum-like Classes.
{ MP_ROM_QSTR(MP_QSTR_Parity), MP_ROM_PTR(&busio_uart_parity_type) },
};
STATIC MP_DEFINE_CONST_DICT(busio_uart_locals_dict, busio_uart_locals_dict_table);
STATIC const mp_stream_p_t uart_stream_p = {
.read = busio_uart_read,
.write = busio_uart_write,
.ioctl = busio_uart_ioctl,
.is_text = false,
};
const mp_obj_type_t busio_uart_type = {
{ &mp_type_type },
.name = MP_QSTR_UART,
.make_new = busio_uart_make_new,
Merge tag 'v1.9.1' Fixes for stmhal USB mass storage, lwIP bindings and VFS regressions This release provides an important fix for the USB mass storage device in the stmhal port by implementing the SCSI SYNCHRONIZE_CACHE command, which is now require by some Operating Systems. There are also fixes for the lwIP bindings to improve non-blocking sockets and error codes. The VFS has some regressions fixed including the ability to statvfs the root. All changes are listed below. py core: - modbuiltins: add core-provided version of input() function - objstr: catch case of negative "maxsplit" arg to str.rsplit() - persistentcode: allow to compile with complex numbers disabled - objstr: allow to compile with obj-repr D, and unicode disabled - modsys: allow to compile with obj-repr D and PY_ATTRTUPLE disabled - provide mp_decode_uint_skip() to help reduce stack usage - makeqstrdefs.py: make script run correctly with Python 2.6 - objstringio: if created from immutable object, follow copy on write policy extmod: - modlwip: connect: for non-blocking mode, return EINPROGRESS - modlwip: fix error codes for duplicate calls to connect() - modlwip: accept: fix error code for non-blocking mode - vfs: allow to statvfs the root directory - vfs: allow "buffering" and "encoding" args to VFS's open() - modframebuf: fix signed/unsigned comparison pendantic warning lib: - libm: use isfinite instead of finitef, for C99 compatibility - utils/interrupt_char: remove support for KBD_EXCEPTION disabled tests: - basics/string_rsplit: add tests for negative "maxsplit" argument - float: convert "sys.exit()" to "raise SystemExit" - float/builtin_float_minmax: PEP8 fixes - basics: convert "sys.exit()" to "raise SystemExit" - convert remaining "sys.exit()" to "raise SystemExit" unix port: - convert to use core-provided version of built-in import() - Makefile: replace references to make with $(MAKE) windows port: - convert to use core-provided version of built-in import() qemu-arm port: - Makefile: adjust object-file lists to get correct dependencies - enable micropython.mem_*() functions to allow more tests stmhal port: - boards: enable DAC for NUCLEO_F767ZI board - add support for NUCLEO_F446RE board - pass USB handler as parameter to allow more than one USB handler - usb: use local USB handler variable in Start-of-Frame handler - usb: make state for USB device private to top-level USB driver - usbdev: for MSC implement SCSI SYNCHRONIZE_CACHE command - convert from using stmhal's input() to core provided version cc3200 port: - convert from using stmhal's input() to core provided version teensy port: - convert from using stmhal's input() to core provided version esp8266 port: - Makefile: replace references to make with $(MAKE) - Makefile: add clean-modules target - convert from using stmhal's input() to core provided version zephyr port: - modusocket: getaddrinfo: Fix mp_obj_len() usage - define MICROPY_PY_SYS_PLATFORM (to "zephyr") - machine_pin: use native Zephyr types for Zephyr API calls docs: - machine.Pin: remove out_value() method - machine.Pin: add on() and off() methods - esp8266: consistently replace Pin.high/low methods with .on/off - esp8266/quickref: polish Pin.on()/off() examples - network: move confusingly-named cc3200 Server class to its reference - uos: deconditionalize, remove minor port-specific details - uos: move cc3200 port legacy VFS mounting functions to its ref doc - machine: sort machine classes in logical order, not alphabetically - network: first step to describe standard network class interface examples: - embedding: use core-provided KeyboardInterrupt object
6 years ago
.getiter = mp_identity_getiter,
.iternext = mp_stream_unbuffered_iter,
.protocol = &uart_stream_p,
.locals_dict = (mp_obj_dict_t*)&busio_uart_locals_dict,
};